iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D4080-15

(Specification)

Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade

Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade

ABSTRACT
This specification covers technical and vapor degreasing grade trichloroethylene. Technical and vapor degreasing grade trichloroethylene shall conform to the requirements prescribed. Specific gravity, distillation range, acidity, alkalinity, water, appearance, color, halide content, nonvolatile residue, and acid acceptance tests shall be performed to conform to the requirements specified.
SCOPE
1.1 This specification covers technical and vapor degreasing grade trichloroethylene.  
Note 1: Guide D3844, Practice D4276, and MNL22 provide additional important information on vapor degreasing and solvent properties.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
31-May-2015
ICS
71.080.20 - Halogenated hydrocarbons
Technical Committee
D26 - Halogenated Organic Solvents and Fire Extinguishing Agents
Drafting Committee
D26.02 - Vapor Degreasing
Current Stage
Ref Project

Relations

Replaces
ASTM D4080-00(2011) - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
Effective Date
01-Jun-2015
Replaced By
ASTM D4080-15(2020) - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
Effective Date
01-Jan-2020
Referred By
ASTM D1856-21 - Standard Test Method for Recovery of Asphalt from Solution by Abson Method
Effective Date
01-Jun-2015
Referred By
ASTM G86-17 - Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
Effective Date
01-Jun-2015

Buy Standard

ASTM D4080-15 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing GradeASTM D4080-15 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
PreviousNext
Technical specification
ASTM D4080-15 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM D4080-15 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing GradeREDLINE ASTM D4080-15 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
PreviousNext
Technical specification
REDLINE ASTM D4080-15 - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D4080 −15
Standard Specification for
1
Trichloroethylene, Technical and Vapor-Degreasing Grade
This standard is issued under the fixed designation D4080; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope D2988 Test Methods for Water-Soluble Halide Ion in Halo-
genated Organic Solvents and Their Admixtures
1.1 Thisspecificationcoverstechnicalandvapordegreasing
D2989 Test Method for Acidity-Alkalinity of Halogenated
grade trichloroethylene.
Organic Solvents and Their Admixtures
2
NOTE1—GuideD3844,PracticeD4276,andMNL2 provideadditional
D3401 Test Methods for Water in Halogenated Organic
important information on vapor degreasing and solvent properties.
Solvents and Their Admixtures
1.2 The values stated in SI units are to be regarded as
D3741 Test Methods for Appearance of Admixtures Con-
standard. No other units of measurement are included in this
taining Halogenated Organic Solvents
standard.
D3844 Guide for Labeling Chlorinated Hydrocarbon Sol-
4
vent Containers (Withdrawn 2013)
1.3 This standard does not purport to address all of the
D4276 Practice for Confined Area Entry
safety concerns, if any, associated with its use. It is the
D6806 Practice for Analysis of Halogenated Organic Sol-
responsibility of the user of this standard to establish appro-
vents and Their Admixtures by Gas Chromatography
priate safety and health practices and determine the applica-
5
2.2 Other Documents:
bility of regulatory limitations prior to use.
49 CFR 100 to 199 Department ofTransportation Hazardous
2. Referenced Documents
Materials Regulations
3
29 CFR 1910.1200 Department of Labor, OSHA Regula-
2.1 ASTM Standards:
tions on Hazard Communications
D2108 Test Method for Color of Halogenated Organic
Solvents and Their Admixtures (Platinum-Cobalt Scale)
3. Properties
D2109 Test Methods for Nonvolatile Matter in Halogenated
3.1 Technical and vapor degreasing grade trichloroethylene
Organic Solvents and Their Admixtures
shall conform to the requirements prescribed in Table 1.
D2111 Test Methods for Specific Gravity and Density of
Halogenated Organic Solvents and Their Admixtures
4. Packaging
D2942 Test Method for Total Acid Acceptance of Haloge-
4.1 Package and label industrial or commercial quantities in
nated Organic Solvents (Nonreflux Methods)
accordance with DOT regulations in 49 CFR 100 to 199, in
accordance with state and local regulations, and in accordance
1
This specification is under the jurisdiction of ASTM Committee D26 on
with OSHA regulations found in 29 CFR 1910.1200.
Halogenated Organic Solvents and Fire Extinguishing Agents and is th
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D4080 − 00 (Reapproved 2011) D4080 − 15
Standard Specification for
1
Trichloroethylene, Technical and Vapor-Degreasing Grade
This standard is issued under the fixed designation D4080; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope
1.1 This specification covers technical and vapor degreasing grade trichloroethylene.
2
NOTE 1—Guide D3844, Practice D4276, and MNL2 provide additional important information on vapor degreasing and solvent properties.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
D1078 Test Method for Distillation Range of Volatile Organic Liquids
D2108 Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
D2109 Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
D2111 Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
D2942 Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
D2988 Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
D2989 Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
D3401 Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
D3741 Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
4
D3844 Guide for Labeling Chlorinated Hydrocarbon Solvent Containers (Withdrawn 2013)
D4276 Practice for Confined Area Entry
D6806 Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
5
2.2 Other Documents:
49 CFR 100 to 199 Department of Transportation Hazardous Materials Regulations
29 CFR 1910.1200 Department of Labor, OSHA Regulations, Regulations on Hazard CommunicationCommunications
3. Properties
3.1 Technical and vapor degreasing grade trichloroethylene shall conform to the requirements prescribed in Table 1.
4. Packaging
4.1 Package and label industrial or commercial quantities in accordance with DOT regulations in 49 CFR 100 to 199, in
accordance with state and local regulations, and in accordance with OSHA regulations found in 29 CFR 1910.1200.
1
This specification is under the jurisdiction of ASTM Committee D26 on Halogenated Organic Solvents and Fire Extinguishing Agents and is the direct responsibility
of Subcommittee D26.02 on Vapor Degreasing.
Current editio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D6368-06(2023)(Specification)
Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide

ABSTRACT
This specification covers solvents based on stabilized normal-propyl bromide (nPB) for use in vapor degreasing. The standard also includes a separate specification for technicalgraden-propyl bromide. Blends and azeotropic mixtures of stabilized nPB for vapor-degreasing shall be blended from nPB meeting the specification for technical-grade nPB. Vapor-degreasing solvents based on stabilized normalpropyl bromide shall conform to the requirements of different properties such as boiling point, acidity, water content, appearance, color, free halogen, nonvolatile residue, acid acceptance, and aluminum corrosion at reflux. Blends and azeotropic mixtures of stabilized nPB with other materials for use in vapor degreasing shall be prepared from technical-grade nPB which shall conform also to requirements of different properties such as: specific gravity, boiling point, acidity, water content, appearance, color, free halogen, nonvolatile residue, normal-propyl bromide content, and iso-propyl bromide content.
SCOPE
1.1 This standard covers solvents based on stabilized normal-propyl bromide (nPB) for use in vapor degreasing. The standard also includes a separate specification for technical-grade n-propyl bromide.  
1.2 Blends and azeotropic mixtures of stabilized nPB for vapor-degreasing shall be blended from nPB meeting the specification for technical-grade nPB.
Note 1: Guide D3844, Practice D4276, and MNL22 provide additional important information on vapor degreasing and solvent properties.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5960-03(2023)(Specification)
Standard Specification for Technical Grade Ethylene Dichloride

ABSTRACT
This specification covers technical grade ethylene dichloride. Technical grade ethylene dichloride shall conform to the requirements prescribed. The color, ethylene dichloride content, specific gravity, acidity, and water content shall be tested to meet the requirements prescribed.
SCOPE
1.1 This specification covers technical grade ethylene dichloride.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5395-03(2023)(Specification)
Standard Specification for Reclaimed Methylene Chloride

ABSTRACT
This specification covers reclaimed methylene chloride used in various industries for noncritical applications. Tests for specific gravity, acidity, water content, appearance, color, nonvolatile residue, chloride content, assay, and 1,1,1-trichloroethane content shall be performed and shall conform to the requirements specified.
SCOPE
1.1 This specification covers the grade of methylene chloride typically needed in various industries for noncritical applications, such as in paint stripping formulations. It may be used as a reference document by purchasers or by persons establishing in-house methylene chloride recovery programs.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2110-00(2022)(Test Method)
Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures

SIGNIFICANCE AND USE
3.1 The pH of halogenated solvents varies according to the nature of stabilizers in the particular solvent. Solvents with alkaline stabilizers (amine-types) generally have pHs in the 7 to 11 range, whereas solvents containing neutral stabilizers (epoxide-types) generally have pHs in the 5 to 7 range.  
3.2 Virgin and reclaimed solvents should have pHs within these ranges, dependent upon the claimed method of stabilization. These values should be within the accepted limits as proposed by the producers of the original virgin solvent.  
3.3 A lowering of pH from the above values, on receipt or use, is cause for concern. In this event, solvents having epoxide stabilizers should be tested for acid acceptance; solvent having alkaline stabilizers should be tested for alkalinity.
SCOPE
1.1 This test method covers the measurement of the pH of water extractions of halogenated organic solvents and admixtures thereof. This test method is applicable for the determination of the pH of water extractions of virgin, reclaimed, or used solvents.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2109-01(2022)(Test Method)
Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures

SIGNIFICANCE AND USE
3.1 Nonvolatile matter in solvents can adversely affect their cleaning properties. These test methods can be used to control soil contamination in the boiling solvent, which if allowed to become too high, can decrease the stability of the solvent.  
3.2 These test methods can be used to establish manufacturing and purchasing specifications.
SCOPE
1.1 These test methods cover the determination of nonvolatile matter in halogenated organic solvents and admixtures.  
1.2 Five test methods are covered, as follows:  
1.2.1 Test Method A—For halogenated organic solvents or admixtures having less than 50 ppm nonvolatile matter; or where precision better than ±10 ppm is required.  
1.2.2 Test Method B—For halogenated organic solvents or admixtures having more than 50 ppm nonvolatile matter or where precision of ±0.001 % (10 ppm) is satisfactory.  
1.2.3 Test Method C—For low-boiling halogenated organic solvents or their admixtures (for example, methylene chloride, trichlorotrifluoroethane) that may superheat and cause bumping while evaporating to dryness with steam. A precision of greater than ±10 ppm can be attained.  
1.2.4 Test Method D—For rapid measurement of nonvolatile matter in halogenated organic solvents and their admixtures and where precision better than ±10 ppm is required.  
1.2.5 Test Method E—For halogenated organic solvents or admixtures and where precision better than ±10 ppm is required.  
1.3 The values stated in SI units are to be regarded as standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D4079-00(2022)(Specification)
Standard Specification for Vapor-Degreasing Grade Methylene Chloride

ABSTRACT
This specification covers vapor-degreasing grade methylene chloride. Vapor-degreasing grade methylene chloride shall be subjected to different tests so as to determine properties such as specific gravity, distillation range at initial boiling point, distillation range at dry point, acidity, water content, appearance, color, nonvolatile residue, and acid acceptance.
SCOPE
1.1 This specification covers vapor-degreasing grade methylene chloride.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: Guide D3844, Practice D4276, and MNL22 provide additional important information on vapor degreasing and solvent properties.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2989-01(2022)(Test Method)
Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures

SIGNIFICANCE AND USE
4.1 This test method can be used to establish manufacturing and purchasing specifications. It can also be used to determine the condition of solvents in use.
SCOPE
1.1 This test method covers the determination of acidity in halogenated organic solvents and admixtures thereof. The alkalinity may be determined utilizing Test Methods D2106, by substituting the end point measured at pH 7 by bromothymol blue or pH meter.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D2106-07(2022)(Test Method)
Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

SIGNIFICANCE AND USE
4.1 This test method is useful for the determination of the amount of acid acceptance contributed by amines or bases as compared to other acid-accepting compounds.
SCOPE
1.1 These test methods, where applicable, cover the determination of the acid acceptance of halogenated organic solvents due to the presence therein of an organic amine titratable by standard acid. These test methods are suitable for samples of 0.001 to 0.02 weight percent (10 ppm to 200 ppm) alkalinity as NaOH. Two test methods are covered as follows:  
1.1.1 Test Method A—pH Method, and  
1.1.2 Test Method B—Indicator Method.  
1.1.3 Test Method C—GC Method.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D6505-00(2022)(Test Method)
Standard Test Method for Assay of normal-Propyl Bromide Content

SIGNIFICANCE AND USE
3.1 This test method provides an analysis in weight percent of the normal-propyl bromide concentration of virgin, formulated, or reclaimed normal-propyl bromide: compounds that co-elute with normal-propyl bromide or normal-heptane (internal standard) may interfere with this test method.
SCOPE
1.1 This test method provides a basis for the determination of the normal-propyl bromide (weight %) in the presence of stabilizers and impurities, in virgin or reclaimed normal-propyl bromide (nPB). The application range is from 50 wt % to 100 wt %.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5616-04(2022)(Specification)
Standard Specification for Reclaimed Trichloroethylene

ABSTRACT
This specification covers the grades of trichloroethylene typically needed in various industries for noncritical applications such as in metal cleaning formulations. It may also be used as a reference document by purchasers or persons establishing in-house trichloroethylene recovery programs. The specimens are classified into three types: Type I – generally recognized for use in precision applications; Type II – for use in less-demanding precision applications; and Type III – may not be suitable for all applications. The three types of reclaimed trichloroethylene shall meet the specific gravity, nonvolatile residue, water content, assay percentage, 1,1,1 trichloroethane content, color in platinum-cobalt scale, appearance, acid acceptance, and acidity requirements.
SCOPE
1.1 This specification covers the grades of trichloroethylene2 typically needed in various industries for noncritical applications such as in metal cleaning formulations. It may be used as a reference document by purchasers or persons establishing in-house trichloroethylene recovery programs.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off