ASTM F887-20
(Specification)Standard Specifications for Personal Climbing Equipment
Standard Specifications for Personal Climbing Equipment
SCOPE
Table of Contents
Section Title
Section/Paragraph
Scope
1
Referenced Documents
2
Terminology
3
Significance and Use
4
Pole and Tree Climbers
Classification
5
Ordering Information
6
Pole and Tree Climbers
7
Climber Gaffs
8
Climber Straps
9
Climber Pads
10
Climber Footplates
11
Body Belts, Positioning Devices and Wood Pole Fall Restriction Devices (WPFRD)
Classification
12
Ordering Information
13
Two Dee Body Belts, Auxiliary Positioning Belts, and Four Dee Body Belts
14
Two Dee Body Belts
14.1
Auxiliary Positioning Belts and Four Dee Body Belts
14.2
Positioning Devices
15
Wood Pole Fall Restriction Device (WPFRD)
16
Arborist Saddle
17
Harnesses
Classification
18
Ordering Information
18.2
Sizing
18.3
Marking
18.4
Energy Absorbing Lanyards
Classification
19
Ordering Information
20
Energy Absorbing Lanyards
21
Qualification Testing
After Exposure to an Electric Arc
22
Hardware Requirements
23
Test Equipment
24
Qualification Testing
25
Body Belts, Four Dee Body Belts, and Auxiliary Positioning Belts
25.1
Positioning Devices
25.2
WPFRD
25.3
Arborist Saddle
25.4
Harness
25.5
Energy Absorbers
25.6
Instructions
26
Guarantee and Rejection
27
Keywords
28
1.1 This standard covers the specifications and qualification testing of the following:
Climbers,
Climber straps,
Climber Pads,
Climber Footplates,
Body Belts,
Work Positioning Devices with Locking Snaphooks/Carabiners,
Wood Pole Fall Restriction Devices (WPFRD),
Arborist Saddle,
Harnesses,
Energy Absorbing Lanyards.
These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for harnesses and energy absorbing lanyards in arresting a fall after exposure to electric arcs are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame.
1.2 Equipment may fall within one of the following categories:
1.2.1 Fall (Travel) Restraint—Prevents a user from reaching a fall hazard (allow 0 fall distance).
1.2.2 Work Positioning—Allows a 2 ft maximum free fall distance.
1.2.3 Fall Arrest—Allows a 6 ft maximum free fall distance with a maximum arrest force of 1800 lb.
Note 1: Under certain conditions and with the use of equipment designed for such conditions, a 12-ft free-fall distance with a maximum arrest force of 1800 lb is allowed.
1.2.4 Suspension—Allows 0 free-fall distance while supporting the user’s weight.
1.2.5 Fall Restriction—to prevent or limit free fall from a work position or while ascending/descending a wood pole.
1.3 Three types of climbers, (Types A, B, and C) and two types of climber straps, Types (A and B) are covered.
1.4 Two types of body belts, (Types A and B) are covered.
1.5 Eight types of work positioning devices: three positioning straps, (Types A, B, and C), three adjustable-positioning lanyards, (Types A, B and C) and two nonadjustable positioning lanyards, (Types A and B) are covered.
1.6 Two types of WPFRD, (Types A and AB) are covered.
1.7 Arborist saddle, (Type A) Work Positioning and Suspension are covered.
1.8 Two types of harnesses, (Types A and B) are covered.
1.9 Two types of energy absorbing lanyards, (Types A and B) are covered.
1.10 The values stated in United States customary units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.11 The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.1.4, 15.3, 15.4, 16.2, 17.2, 18.4, 21.2, 22, 23, and 25 of ...
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:F887 −20
Standard Specifications for
1
Personal Climbing Equipment
ThisstandardisissuedunderthefixeddesignationF887;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoptionor,inthecaseofrevision,theyearoflastrevision.Anumberinparenthesesindicatestheyearoflastreapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
Table of Contents
Section/
Table of Contents Section Title
Paragraph
Section/
Section Title
Guarantee and Rejection 27
Paragraph
Keywords 28
Scope 1
Referenced Documents 2
1.1 This standard covers the specifications and qualification
Terminology 3
testing of the following:
Significance and Use 4
Pole and Tree Climbers
Climbers,
Classification 5
Climber straps,
Ordering Information 6
Climber Pads,
Pole and Tree Climbers 7
Climber Gaffs 8 Climber Footplates,
Climber Straps 9
Body Belts,
Climber Pads 10
Work Positioning Devices with Locking Snaphooks/
Climber Footplates 11
Body Belts, Positioning Devices and Wood Pole Fall Carabiners,
Restriction Devices (WPFRD)
Wood Pole Fall Restriction Devices (WPFRD),
Classification 12
Arborist Saddle,
Ordering Information 13
Two Dee Body Belts, Auxiliary Positioning Belts, and 14
Harnesses,
Four Dee Body Belts
Energy Absorbing Lanyards.
Two Dee Body Belts 14.1
These devices are used by workers in the climbing of poles,
Auxiliary Positioning Belts and Four Dee Body Belts 14.2
Positioning Devices 15
trees, towers, and other structures. Minimum performance
Wood Pole Fall Restriction Device (WPFRD) 16
criteria for harnesses and energy absorbing lanyards in arrest-
Arborist Saddle 17
Harnesses ing a fall after exposure to electric arcs are included for
Classification 18
workerswhomaybeexposedtothermalhazardsofmomentary
Ordering Information 18.2
electric arcs or flame.
Sizing 18.3
Marking 18.4
1.2 Equipment may fall within one of the following catego-
Energy Absorbing Lanyards
Classification 19 ries:
Ordering Information 20
1.2.1 Fall (Travel) Restraint—Preventsauserfromreaching
Energy Absorbing Lanyards 21
a fall hazard (allow 0 fall distance).
Qualification Testing
After Exposure to an Electric Arc 22
1.2.2 Work Positioning—Allowsa2ft maximum free fall
Hardware Requirements 23
distance.
Test Equipment 24
Qualification Testing 25
1.2.3 Fall Arrest—Allowsa6ftmaximumfree fall distance
Body Belts, Four Dee Body Belts, and Auxiliary 25.1
with a maximum arrest force of 1800 lb.
Positioning Belts
Positioning Devices 25.2
NOTE 1—Under certain conditions and with the use of equipment
WPFRD 25.3
designed for such conditions, a 12-ft free-fall distance with a maximum
Arborist Saddle 25.4
Harness 25.5
arrest force of 1800 lb is allowed.
Energy Absorbers 25.6
1.2.4 Suspension—Allows 0 free-fall distance while sup-
Instructions 26
porting the user’s weight.
1.2.5 Fall Restriction—to prevent or limit free fall from a
1
work position or while ascending/descending a wood pole.
This standard is under the jurisdiction ofASTM Committee F18 on Electrical
ProtectiveEquipmentforWorkersandarethedirectresponsibilityofSubcommittee
1.3 Three types of climbers, (Types A, B, and C) and two
F18.15 on Worker Personal Equipment.
Current edition approved Feb. 15, 2020. Published April 2020. Originally
types of climber straps, Types (A and B) are covered.
approved in 1984. Last previous edition approved in 2018 as F887–18. DOI:
10.1520/F0887-20. 1.4 Two types of body belts, (Types A and B) are covered.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F887−20
1.5 Eight types of work positioning devices: three position- Z359.14-2014Safety Requirements for Self-Retracting De-
ing straps, (Types A, B, and C), three adjustable-positioning vices for Personal Fall Arrest and Rescue Systems
5
lanyards, (TypesA, B and C) and two nonadjustable position-
2.4 CSA Standard:
ing lanyards, (Types A and B) are covered.
CAN/CSA 015Wood Utility Poles and Reinforcing Stubs
1.6 Two types of WPFRD, (Types A and AB) are covered.
3. Terminology
1.7 Arboristsaddle,(TypeA)WorkPositioningandSuspen-
3.1 Definitions:
sion are covered.
3.1.1 adjustable positioning lanyard (APL), n—a compo-
1.8 Two types of harnesses, (Types A and B) are covered.
nent of a work positioning or fall restriction system (may be
1.9 Two types of energy absorbing lanyards, (Types A and
used for applications such as transitioning past an obstruction
B) are covered.
during ascent or descent).
1.10 The values stated in United States customary units are
3.1.2 afterflame, n—pe
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F887 − 18 F887 − 20
Standard Specifications for
1
Personal Climbing Equipment
This standard is issued under the fixed designation F887; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
Table of Contents
Section/
Section Title
Paragraph
Scope 1
Referenced Documents 2
Terminology 3
Significance and Use 4
Pole and Tree Climbers
Classification 5
Ordering Information 6
Pole and Tree Climbers 7
Climber Gaffs 8
Climber Straps 9
Climber Pads 10
Climber Footplates 11
Body Belts, Work Positioning Devices and Wood Pole
Fall Restrict Devices (WPFRD)
Body Belts, Positioning Devices and Wood Pole Fall
Restriction Devices (WPFRD)
Classification 12
Ordering Information 13
Two Dee Body Belts, Auxiliary Positioning Belts, and 14
Four Dee Body Belts
Two Dee Body Belts 14.1
Auxiliary Positioning Belts and Four Dee Body Belts 14.2
Positioning Devices 15
Wood Pole Fall Restriction Device (WPFRD) 16
Arborist Saddle
Arborist Saddle 17
Harnesses
Classification 18
Ordering Information 18.2
Sizing 18.3
Marking 18.4
Energy Absorbing Lanyards
Classification 19
Ordering Information 20
Energy Absorbing Lanyards 21
Qualification Testing
Electric Arc Performance 22
After Exposure to an Electric Arc 22
Hardware Requirements 23
Test Equipment 24
Qualification Testing 25
Body Belts, Four Dee Body Belts, and Auxiliary 25.1
Positioning Belts
Positioning Devices 25.2
WPFRD 25.3
Arborist Saddle 25.4
Harness 25.5
Energy Absorbers 25.6
Instructions 26
1
This standard is under the jurisdiction of ASTM Committee F18 on Electrical Protective Equipment for Workers and are the direct responsibility of Subcommittee F18.15
on Worker Personal Equipment.
Current edition approved Nov. 15, 2018Feb. 15, 2020. Published December 2018April 2020. Originally approved in 1984. Last previous edition approved in 20162018
as F887 – 16.F887 – 18. DOI: 10.1520/F0887-18.10.1520/F0887-20.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F887 − 20
Table of Contents
Section/
Section Title
Paragraph
Guarantee and Rejection 27
Keywords 28
1.1 This standard covers the specifications and qualification testing of the following:
Climbers,
Climber straps,
Climber Pads,
Climber Footplates,
Body Belts,
Work Positioning Devices with Locking Snaphooks/Carabiners,
Wood Pole Fall Restriction Devices (WPFRD),
Arborist Saddle,
Harnesses,
Energy Absorbing Lanyards.
These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria
for arc resistance of harnesses and energy absorbing lanyards in arresting a fall after exposure to electric arcs are included for
workers who may be exposed to thermal hazards of momentary electric arcs or flame.
1.2 Equipment may fall within one of the following categories:
1.2.1 Fall (Travel) Restraint—Prevents a user from being exposed to a fall hazard.reaching a fall hazard (allow 0 fall distance).
1.2.2 Work Positioning—Allows a 2 ft maximum free fall distance.
1.2.3 Fall Arrest—Allows a 6 ft maximum free fall distance with a maximum arrest force of 1800 lb.
NOTE 1—Under certain conditions and with the use of equipment designed for such conditions, a 12-ft free-fall distance with a maximum arrest force
of 1800 lb is allowed.
1.2.4 Suspension—Allows 0 free-fall distance while supporting the user’s weight.
1.2.5 Fall Restriction—to prevent or limit free fall from a work position or while ascending/descending a wood pole.
1.3 Three types of climbers, (Types A, B, and C) and two types of climber straps, Types (A and B) are covered.
1.4 Two types of body belts, (Types A and B) are covered.
1.5 Eight types of work positioning devices: three positioning straps, (Types A, B, and C), three adjustable-positioning lanyards,
(Types A, B and C) and two nonadjustable positioning lanyards, (Types A and B) are covered.
1.6 Two types of WPFRD, (Types A and AB) are covered.
1.7 Arborist saddle, (Type A) Work Positioning and Suspension are covered.
1.8 Two types of harnesses, (Types A and B) are covered.
1.9 Two types of energy absorbing lanyards, (Types A and B) are covered.
1.10 The values stated in United States customary units are
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.