Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

ABSTRACT
This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Fabric produced from three classes of wire coatings are covered as follows: Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire; Class 2a consists of polymer coating extruded and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire; Class 2b consists of polymer coating fused and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire. Materials shall be tested and the individual grades shall conform to material, weave, mesh size, diamond count, wire size, fabric height, selvage, breaking strength, weight of Zinc, Aluminum, or Zinc-5 % Aluminum-Mischmetal Alloy Coatings, polymer coating thickness, polymer-coated wire, and roll length.
SCOPE
1.1 This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Polyvinyl chloride and other organic polymer coating hereinafter will be designated as polymer coating.
1.2 Fabric produced from three classes of wire coatings are covered as follows:
1.2.1 Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.
1.2.2  Class 2a consists of polymer coating extruded and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.
1.2.3 Class 2b consists of polymer coating fused and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.

General Information

Status
Historical
Publication Date
14-Sep-2007
Technical Committee
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM F668-07 - Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F668 – 07
Standard Specification for
Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated
1
Steel Chain-Link Fence Fabric
ThisstandardisissuedunderthefixeddesignationF668;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoptionor,inthecaseofrevision,theyearoflastrevision.Anumberinparenthesesindicatestheyearoflastreapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope F934 Specification for Colors for Polymer-Coated Chain
3
Link Fence Materials
1.1 This specification covers polyvinyl chloride and other
G23 Practice for Operating Light-Exposure Apparatus
conforming organic polymer-coated steel chain-link fabric,
(Carbon-Arc Type) With and Without Water for Exposure
coated before weaving. Polyvinyl chloride and other organic
33
of Nonmetallic Materials (Discontinued 2001)
polymer coating hereinafter will be designated as polymer
G26 Practice for Operating Light-Exposure Apparatus
coating.
(Xenon-Arc Type) With and Without Water for Exposure
1.2 Fabric produced from three classes of wire coatings are
3
of Nonmetallic Materials (Discontinued 2001)
covered as follows:
2.2 U.S. Federal Standard:
1.2.1 Class I consists of polymer coatings extruded over
4
Fed. Std. No. 123 Marking for Shipments (CivilAgencies)
zinc-coated, aluminum-coated, or zinc-5 % aluminum-
2.3 U.S. Military Standards:
mischmetal alloy-coated, or zinc-5% aluminum-mischmetal
4
MIL-STD-129 Marking for Shipment and Storage
alloy-coated steel wire.
1.2.2 Class 2a consists of polymer coating extruded and
3. Terminology
adhered to zinc-coated, aluminum-coated, or zinc-5 %
3.1 Definitions—For definitions of terms such as chain-link
aluminum-mischmetal alloy-coated steel wire.
fence fabric, selvage, knuckle, twist, and diamond count, see
1.2.3 Class 2b consists of polymer coating fused and ad-
Terminology F552.
hered to zinc-coated, aluminum-coated, or zinc-5 %
aluminum-mischmetal alloy-coated steel wire.
4. Ordering Information
1.3 The values stated in inch-pound units are to be regarded
4.1 Orders for chain-link fence fabric purchased to this
as the standard. The values given in parentheses are provided
specification shall include the following information:
for information only.
4.1.1 Quantity.
4.1.2 Classofpolymercoatingtobeappliedtothemetallic-
2. Referenced Documents
2 coated core wire.
2.1 ASTM Standards:
4.1.3 Color of coating (see 16.5.1).
A90/A90M Test Method for Weight [Mass] of Coating on
4.1.4 Size of mesh (see Table 1 ).
Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
4.1.5 Diameter of metallic-coated core wire or minimum
A370 Test Methods and Definitions for Mechanical Testing
breaking strength, or both (see Tables 1-3).
of Steel Products
4.1.6 Height of fabric.
A428/A428M TestMethodforWeight[Mass]ofCoatingon
4.1.7 Type of selvage if nonstandard (see 12.1 and 12.2).
Aluminum-Coated Iron or Steel Articles
4.1.8 Diamond count if nonstandard (see 9.1 and Table 2).
D1499 PracticeforFilteredOpen-FlameCarbon-ArcExpo-
4.1.9 Certification, if required.
sures of Plastics
4.2 Any tests required other than those specifically covered
F552 Terminology Relating to Chain Link Fencing
in this specification must be stipulated by the purchaser in the
order or contract.
4.3 All rolls of fabric accepted by the purchaser shall be
1
ThisspecificationisunderthejurisdictionofASTMCommitteeF14onFences
billed to him on the basis of the original footage of the rolls
and is the direct responsibility of Subcommittee F14.40 on Chain Link Fence and
before sampling, unless changed by contractual agreement.
Wire Accessories.
Current edition approved Sept. 15, 2007. Published October 2007. Originally
approved in 1981. Last previous edition approved in 2006 as F668-06. DOI:
10.1520/F0668-07.
2 3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Withdrawn.
4
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Available from the procuring activity or as directed by the contracting office or
Standards volume information, refer to the standard’s Document Summary page on fromStandardizationDocumentsOrderDesk,Bldg.4SectionD,700RobbinsAve.,
the ASTM website. Philadelphia, PA 19111-5094, Attn: NPODS.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F668 – 07
A
TABLE 1 Sizes of Wire and Mesh
hot-dip method, zinc-coated by the electrolytic process, or
aluminum-coated by the hot-dip method. The use of a primer
NOTE 1—For custom fabric heights, see Section 11.
prior to the application of a polymer coating may be recom-
Specified
Size Size
mended by the polymer manufacturer.
Diameter
Core of
of Core Height of Fence Fabric, in.
Wire Mesh,
NOTE 1—Under current practic
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.