iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D2190-97(2001)

(Specification)

Standard Specification for Vinyl Acetate

Standard Specification for Vinyl Acetate

SCOPE
1.1 This specification covers vinyl acetate.
1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

General Information

Status
Historical
Publication Date
31-Dec-2000
ICS
71.080.99 - Other organic chemicals
Technical Committee
D01 - Paint and Related Coatings, Materials, and Applications
Drafting Committee
D01.35 - Solvents, Plasticizers, and Chemical Intermediates
Current Stage
Ref Project

Relations

Replaces
ASTM D2190-97 - Standard Specification for Vinyl Acetate
Effective Date
01-Jan-2001
Replaced By
ASTM D2190-07 - Standard Specification for Vinyl Acetate
Effective Date
01-Jun-2007

Buy Standard

ASTM D2190-97(2001) - Standard Specification for Vinyl AcetateASTM D2190-97(2001) - Standard Specification for Vinyl Acetate
PreviousNext
Technical specification
ASTM D2190-97(2001) - Standard Specification for Vinyl Acetate
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 2190 – 97 (Reapproved 2001)
Standard Specification for
Vinyl Acetate
This standard is issued under the fixed designation D 2190; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 3. Sampling
1.1 This specification covers vinyl acetate. 3.1 Sample the material in accordance with Practice E 300.
1.2 For specific hazard information and guidance, see the
4. Properties
supplier’sMaterialSafetyDataSheetformaterialslistedinthis
4.1 Thevinylacetateshallconformtothefollowingrequire-
specification.
ments:
2. Referenced Documents
Distillation range, °C 71.8 to 73.0
Apparent specific gravity, 20/20°C 0.9335 to 0.9345
2.1 ASTM Standards:
Color (HQ grade only), Pt-Co scale, max 5
D 268 Guide for Sampling and Testing Volatile Solvents
Water content, weight %, max 0.05
and Chemical Intermediates for Use in Paint and Related
Acetaldehyde content, weight %, max 0.02
Acidity, as acetic acid, weight %, max 0.005
Coatings and Materials
A
Inhibitor content (HQ)
D 1078 Test Method for Distillation Range of Volatile
______________
Organic Liquids
A
As agreed upon between the purchaser and the manufacturer.
D 1209 Test Method for Color of Clear Liquids (Platinum-
5. Test Methods
Cobalt Scale)
D 1364 Test Method for Water in Volatile Solvents (Fischer
5.1 The properties enumerated in this specification shall be
Reagent Titration Method)
determined in accordance with the following ASTM methods:
D 2086 Test Method for Acidity in Vinyl Acetate and
5.1.1 Apparent Specific Gravity—Determine the apparent
Acetaldehyde
specific gravity by any convenient method that is accurate to
D 2191 Test Method for Acetaldehyde Content of Vinyl
the fourth decimal place, the temperature of both specimen and
Acetate
water being 20°C. (See Guide D 268 or Test Method D 4052.)
D 2193 Test Method for Hydroquinone in Vinyl Acetate
5.1.2 Color—Test Method D 1209.
D 4052 Test Method for Density and Relative Density of
5.1.3 Distillation Range—Test Method D 1078, using an
Liquids by Digital Density Meter
ASTM Solvents Distillation Thermometer 39C having a range
E 1 Specification for ASTM Thermometers
from 48 to 102°C, and conforming to the requirements in
E 300 Practice for Sampling Industrial Chemicals
Specification E 1.
2.2 U.S. Federal Standard:
5.1.4 Wate
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D1718-09(2023)(Specification)
Standard Specification for Isobutyl Acetate (95 % Grade)

ABSTRACT
This specification details the properties and requirements for isobutyl acetate. The specimens shall be sampled, go through chemical tests and conform accordingly to specified values of the following requirements: apparent specific gravity; color (Pt-Co units) distillation (initial boiling point and dry point); nonvolatile matter content; water content; acidity (free acid as acetic acid); and purity.
SCOPE
1.1 This specification covers isobutyl acetate (95 % grade).  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For specific hazard information and guidance, see the supplier’s Safety Data Sheet for material listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2086-22(Test Method)
Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde

SIGNIFICANCE AND USE
4.1 This test method provides a measurement of total acidity in vinyl acetate and acetaldehyde. The results of these measurements can be used for specification acceptance.
SCOPE
1.1 This test method covers the determination of total acidity as acetic acid in refined vinyl acetate and acetaldehyde.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 For purposes of determining conformance of an observed value or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D2191-22(Test Method)
Standard Test Method for Acetaldehyde Content of Vinyl Acetate

SIGNIFICANCE AND USE
4.1 This test method provides a measurement of acetaldehyde content in vinyl acetate. The results of these measurements can be used for specification acceptance.
SCOPE
1.1 This test method covers the determination of trace quantities of acetaldehyde, in the range from 0.00 to 0.05 %, contained in 99 % grade vinyl acetate.  
1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 8.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D2193-22(Test Method)
Standard Test Method for Hydroquinone in Vinyl Acetate

SIGNIFICANCE AND USE
4.1 This test method provides a measurement of inhibitor level in vinyl acetate. The results of these measurements can be used for specification acceptance.
SCOPE
1.1 This test method covers the determination of hydroquinone in the range from 1 to 20 ppm in refined, commercially available, vinyl acetate.  
1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5137-07(2021)(Specification)
Standard Specification for Hexyl Acetate

ABSTRACT
This specification establishes the properties and requirements for hexyl acetate used as an active tail high boiling solvent in lacquers, automotive coatings, maintenance paints, and other related coatings. Specimens shall be sampled and tested as appropriate, and shall meet specified values of the following properties: acidity (free acid as acetic acid); apparent specific gravity; color (Pt-Co units); distillation range (initial boiling point and 95 % point); Ransburg electrical resistivity; ester value; and water content.
SCOPE
1.1 This specification covers hexyl acetate, which is used as an active tail high boiling solvent in lacquers, automotive coatings, maintenance paints, and other related coatings.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For specific hazard information and guidance, see the supplier’s Material Safety Data Sheet.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2190-07(2021)(Specification)
Standard Specification for Vinyl Acetate

ABSTRACT
This specification covers vinyl acetate. The vinyl acetate shall conform to the requirements specified for: (1) distillation range, (2) apparent specific gravity, (3) Pt-Co scale color (for HQ grade only), (4) water content, (5) acetaldehyde content, (6) acidity (weight percentage of acetic acid), and (7) inhibitor content. The sampling and test methods to determine conformance to the specified properties are given.
SCOPE
1.1 This specification covers vinyl acetate.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For specific hazard information and guidance, see the supplier’s Material Safety Data Sheet for materials listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2572-19(Test Method)
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

SIGNIFICANCE AND USE
4.1 The percent NCO is used to establish unit ratios for stoichiometric reactions with co-reactants.
SCOPE
1.1 This test method covers the determination of the isocyanate group (NCO) content of a urethane intermediate or prepolymer.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3130-11(2019)(Specification)
Standard Specification for n-Propyl Acetate (96 % Grade)

ABSTRACT
This specification establishes the properties and requirements for n-propyl acetate. Specimens shall be sampled, undergo chemical analysis, and conform accordingly to specified values of the following requirements: apparent specific gravity; color (Pt-Co units); distillation (initial boiling point and dry point); nonvolatile matter content; water content; acidity (free acid as acetic acid); and purity.
SCOPE
1.1 This specification covers n-propyl acetate (96 % grade).  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for material listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4614-11(2019)(Specification)
Standard Specification for Ethyl Acetate (All Grades)

ABSTRACT
This specification covers the various grades of ethyl acetate suitable for use as solvents in paint and related coatings. These grades shall be subjected to the following tests: purity test, alcohol content test, apparent specific gravity test, distillation range test, acidity test, water test, color test, nonvolatile matter test, and odor test.
SCOPE
1.1 This specification covers the various grades of ethyl acetate suitable for use as solvents in paint and related coatings.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for material listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D6229-06(2018)(Test Method)
Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

SIGNIFICANCE AND USE
4.1 This test method is similar to Test Method D4367 with the exception that capillary columns are used and intended for trace level of benzene in hydrocarbon solvents. The need for trace benzene analysis in hydrocarbon solvents arose because of the increase of more stringent regulation of benzene level in these materials.
SCOPE
1.1 This test method covers the determination by capillary gas chromatography of trace benzene in hydrocarbon solvents at levels from 1.0 to 2400 vppm.
Note 1: Lower levels of benzene may be determined by this test method. However the gas chromatography (GC) will have to be modified from those specified in this test method. The precision of the method may not apply to these lower benzene levels.  
1.2 For hazard information and guidance, see the supplier’s Safety Data Sheet.  
1.3 The values stated in SI units are to be regarded as the statement. The values in parenthesis are given for information only and are not necessarily the exact equivalent of the SI unit values.  
1.4 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with Practice E29.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off