iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D2190-07(2021)

(Specification)

Standard Specification for Vinyl Acetate

Standard Specification for Vinyl Acetate

ABSTRACT
This specification covers vinyl acetate. The vinyl acetate shall conform to the requirements specified for: (1) distillation range, (2) apparent specific gravity, (3) Pt-Co scale color (for HQ grade only), (4) water content, (5) acetaldehyde content, (6) acidity (weight percentage of acetic acid), and (7) inhibitor content. The sampling and test methods to determine conformance to the specified properties are given.
SCOPE
1.1 This specification covers vinyl acetate.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For specific hazard information and guidance, see the supplier’s Material Safety Data Sheet for materials listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Published
Publication Date
30-Jun-2021
ICS
71.080.99 - Other organic chemicals
Technical Committee
D01 - Paint and Related Coatings, Materials, and Applications
Drafting Committee
D01.35 - Solvents, Plasticizers, and Chemical Intermediates
Current Stage
Ref Project

Relations

Refers
ASTM D1078-11 - Standard Test Method for Distillation Range of Volatile Organic Liquids
Effective Date
15-Nov-2011
Refers
ASTM D5386-10 - Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
Effective Date
01-Jan-2010
Refers
ASTM D2086-08 - Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde
Effective Date
01-Nov-2008
Refers
ASTM E29-08 - Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
Effective Date
01-Oct-2008
Refers
ASTM D268-01(2007) - Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
Effective Date
01-Jun-2007
Refers
ASTM D1364-02(2007) - Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
Effective Date
01-Jun-2007
Refers
ASTM E29-06b - Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
Effective Date
15-Nov-2006
Refers
ASTM E29-06a - Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
Effective Date
15-Sep-2006
Refers
ASTM D2193-06 - Standard Test Method for Hydroquinone in Vinyl Acetate
Effective Date
01-Jun-2006
Refers
ASTM E29-06 - Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
Effective Date
01-May-2006
Refers
ASTM D2191-06 - Standard Test Method for Acetaldehyde Content of Vinyl Acetate
Effective Date
01-Apr-2006
Refers
ASTM D5386-05 - Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
Effective Date
15-Oct-2005
Refers
ASTM D1209-05 - Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
Effective Date
15-May-2005
Refers
ASTM D1209-05e1 - Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
Effective Date
15-May-2005
Refers
ASTM D1078-05 - Standard Test Method for Distillation Range of Volatile Organic Liquids
Effective Date
15-May-2005

Buy Standard

ASTM D2190-07(2021) - Standard Specification for Vinyl AcetateASTM D2190-07(2021) - Standard Specification for Vinyl Acetate
PreviousNext
Technical specification
ASTM D2190-07(2021) - Standard Specification for Vinyl Acetate
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D2190 −07 (Reapproved 2021)
Standard Specification for
Vinyl Acetate
This standard is issued under the fixed designation D2190; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope Fischer Reagent Titration Method) (Withdrawn 2021)
D2086 Test Method for Acidity in Vinyl Acetate and Acet-
1.1 This specification covers vinyl acetate.
aldehyde (Withdrawn 2021)
1.2 The following applies to all specified limits in this
D2191 Test Method for Acetaldehyde Content of Vinyl
standard; for purposes of determining conformance with this 3
Acetate (Withdrawn 2021)
standard, an observed value or a calculated value shall be
D2193 Test Method for Hydroquinone in Vinyl Acetate
rounded off “to the nearest unit” in the last right-hand digit 3
(Withdrawn 2021)
used in expressing the specification limit, in accordance with
D4052 Test Method for Density, Relative Density, and API
the rounding-off method of Practice E29.
Gravity of Liquids by Digital Density Meter
D5386 Test Method for Color of Liquids Using Tristimulus
1.3 The values stated in SI units are to be regarded as
standard. No other units of measurement are included in this Colorimetry
E29 Practice for Using Significant Digits in Test Data to
standard.
Determine Conformance with Specifications
1.4 For specific hazard information and guidance, see the
E300 Practice for Sampling Industrial Chemicals
supplier’sMaterialSafetyDataSheetformaterialslistedinthis
2.2 U.S. Federal Standard:
specification.
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
1.5 This international standard was developed in accor- 4
of
dance with internationally recognized principles on standard-
ization established in the Decision on Principles for the
3. Sampling
Development of International Standards, Guides and Recom-
3.1 Sample the material in accordance with Practice E300.
mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
4. Properties
4.1 Thevinylacetateshallconformtothefollowingrequire-
2. Referenced Documents
ments:
2.1 ASTM Standards:
Distillation range, °C 71.8 to 73.0
D268 Guide for Sampling and Testing Volatile Solvents and
Apparent specific gravity, 20/20 °C 0.9335 to 0.9345
Chemical Intermediates for Use in Paint and Related Color (HQ grade only), Pt-Co scale, max (Note 1) 5
Water content, weight %, max 0.05
Coatings and Material (Withdrawn 2021)
Acetaldehyde content, weight %, max 0.02
D1078 Test Method for Distillation Range of Volatile Or-
Acidity, as acetic acid, weight %, max 0.005
A
ganic Liquids Inhibitor content (HQ)
D1209 Test Method for Color of Clear Liquids (Platinum-
A
As agreed upon between the purchaser and the manufacturer.
Cobalt Scale)
D1364 Test Method for Water in Volatile Solvents (Karl
NOTE 1—Instrumental Pt-Co color determined by Test Method D5386
has been shown to have no statistically significant difference from Pt-Co
color determined by Test Method D1209. However, it is not known
whether vinyl acetate was part of the sample set included in the
This specification is under the jur
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D1718-09(2023)(Specification)
Standard Specification for Isobutyl Acetate (95 % Grade)

ABSTRACT
This specification details the properties and requirements for isobutyl acetate. The specimens shall be sampled, go through chemical tests and conform accordingly to specified values of the following requirements: apparent specific gravity; color (Pt-Co units) distillation (initial boiling point and dry point); nonvolatile matter content; water content; acidity (free acid as acetic acid); and purity.
SCOPE
1.1 This specification covers isobutyl acetate (95 % grade).  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For specific hazard information and guidance, see the supplier’s Safety Data Sheet for material listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2191-22(Test Method)
Standard Test Method for Acetaldehyde Content of Vinyl Acetate

SIGNIFICANCE AND USE
4.1 This test method provides a measurement of acetaldehyde content in vinyl acetate. The results of these measurements can be used for specification acceptance.
SCOPE
1.1 This test method covers the determination of trace quantities of acetaldehyde, in the range from 0.00 to 0.05 %, contained in 99 % grade vinyl acetate.  
1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Section 8.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D2193-22(Test Method)
Standard Test Method for Hydroquinone in Vinyl Acetate

SIGNIFICANCE AND USE
4.1 This test method provides a measurement of inhibitor level in vinyl acetate. The results of these measurements can be used for specification acceptance.
SCOPE
1.1 This test method covers the determination of hydroquinone in the range from 1 to 20 ppm in refined, commercially available, vinyl acetate.  
1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2086-22(Test Method)
Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde

SIGNIFICANCE AND USE
4.1 This test method provides a measurement of total acidity in vinyl acetate and acetaldehyde. The results of these measurements can be used for specification acceptance.
SCOPE
1.1 This test method covers the determination of total acidity as acetic acid in refined vinyl acetate and acetaldehyde.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 For purposes of determining conformance of an observed value or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D5137-07(2021)(Specification)
Standard Specification for Hexyl Acetate

ABSTRACT
This specification establishes the properties and requirements for hexyl acetate used as an active tail high boiling solvent in lacquers, automotive coatings, maintenance paints, and other related coatings. Specimens shall be sampled and tested as appropriate, and shall meet specified values of the following properties: acidity (free acid as acetic acid); apparent specific gravity; color (Pt-Co units); distillation range (initial boiling point and 95 % point); Ransburg electrical resistivity; ester value; and water content.
SCOPE
1.1 This specification covers hexyl acetate, which is used as an active tail high boiling solvent in lacquers, automotive coatings, maintenance paints, and other related coatings.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For specific hazard information and guidance, see the supplier’s Material Safety Data Sheet.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2572-19(Test Method)
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

SIGNIFICANCE AND USE
4.1 The percent NCO is used to establish unit ratios for stoichiometric reactions with co-reactants.
SCOPE
1.1 This test method covers the determination of the isocyanate group (NCO) content of a urethane intermediate or prepolymer.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3130-11(2019)(Specification)
Standard Specification for n-Propyl Acetate (96 % Grade)

ABSTRACT
This specification establishes the properties and requirements for n-propyl acetate. Specimens shall be sampled, undergo chemical analysis, and conform accordingly to specified values of the following requirements: apparent specific gravity; color (Pt-Co units); distillation (initial boiling point and dry point); nonvolatile matter content; water content; acidity (free acid as acetic acid); and purity.
SCOPE
1.1 This specification covers n-propyl acetate (96 % grade).  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for material listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4614-11(2019)(Specification)
Standard Specification for Ethyl Acetate (All Grades)

ABSTRACT
This specification covers the various grades of ethyl acetate suitable for use as solvents in paint and related coatings. These grades shall be subjected to the following tests: purity test, alcohol content test, apparent specific gravity test, distillation range test, acidity test, water test, color test, nonvolatile matter test, and odor test.
SCOPE
1.1 This specification covers the various grades of ethyl acetate suitable for use as solvents in paint and related coatings.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for material listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D6229-06(2018)(Test Method)
Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

SIGNIFICANCE AND USE
4.1 This test method is similar to Test Method D4367 with the exception that capillary columns are used and intended for trace level of benzene in hydrocarbon solvents. The need for trace benzene analysis in hydrocarbon solvents arose because of the increase of more stringent regulation of benzene level in these materials.
SCOPE
1.1 This test method covers the determination by capillary gas chromatography of trace benzene in hydrocarbon solvents at levels from 1.0 to 2400 vppm.
Note 1: Lower levels of benzene may be determined by this test method. However the gas chromatography (GC) will have to be modified from those specified in this test method. The precision of the method may not apply to these lower benzene levels.  
1.2 For hazard information and guidance, see the supplier’s Safety Data Sheet.  
1.3 The values stated in SI units are to be regarded as the statement. The values in parenthesis are given for information only and are not necessarily the exact equivalent of the SI unit values.  
1.4 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with Practice E29.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D6696-16(2023)(Guide)
Standard Guide for Understanding Cyanide Species

SIGNIFICANCE AND USE
4.1 This guide provides standard terminology for use in identifying and describing the different chemical forms of cyanide. The complex nature of cyanide chemistry, existence of numerous distinct chemical forms as well as the various regulatory distinctions that may be made can lead to confusion in technical discussions on cyanide and in the selection of appropriate methods for its analysis. This guide is intended to provide clarification and a common framework of terms and definitions to facilitate discussions and referencing different cyanide chemical species and groups of cyanide compounds.  
4.2 The use of such common terminology is particularly important from an environmental perspective because certain forms of cyanide are considered to be toxic. Therefore, their release into the environment is regulated by federal and state agencies. Thus a general understanding of cyanide chemistry and species definitions is needed for proper wastewater management and testing.
SCOPE
1.1 This guide defines guidance based on a consensus of viewpoints for interpretation of test results to identify various chemical forms of cyanide. It is intended to provide a general understanding of the chemical nature of distinct cyanide species as related to chemical analysis and environmental fate and transport.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    6 pages
    English language
    sale 15% off