iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F2755-14

(Specification)

Standard Safety Specification for Cautionary Labeling of Inflatable Air Mattresses

Standard Safety Specification for Cautionary Labeling of Inflatable Air Mattresses

SCOPE
1.1 This safety specification covers safety requirements aimed at providing cautionary labeling information for safer use of inflatable air mattresses (also known as “air beds,” collectively referred to herein as “inflatable air mattresses”). The intent of this safety specification is to reduce child (infant) injuries and fatalities caused by suffocation on inflatable air mattresses.  
1.2 This safety specification covers all size inflatable air mattresses—including but not limited to full, queen, king, and twin sizes.  
1.3 This safety specification does not cover inflatable air mattresses designed specifically for use in Durable Infant Products.  
1.4 This safety specification is intended to reduce entrapment hazards to children and risk of suffocation to infants up to and including age 15 months.  
1.5 This safety specification includes inflatable air mattresses intended for recreational, camping, and other indoor and outdoor uses.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
28-Feb-2014
ICS
97.140 - Furniture
Technical Committee
F15 - Consumer Products
Drafting Committee
F15.63 - Inflatable Air Mattresses
Current Stage
Ref Project

Buy Standard

ASTM F2755-14 - Standard Safety Specification for Cautionary Labeling of Inflatable Air MattressesASTM F2755-14 - Standard Safety Specification for Cautionary Labeling of Inflatable Air Mattresses
PreviousNext
Technical specification
ASTM F2755-14 - Standard Safety Specification for Cautionary Labeling of Inflatable Air Mattresses
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F2755 −14
Standard Safety Specification for
1
Cautionary Labeling of Inflatable Air Mattresses
This standard is issued under the fixed designation F2755; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
Since 2002 (until Jan. 1, 2008), the Consumer Product Safety Commission (CPSC) has received
reports of 16 tragic deaths, mostly infants younger than 8 months of age, who were placed to sleep
on air mattresses. Eleven suffocated in a facedown position on an air mattress, and five died as a result
of suffocation after falling into gaps between the mattress and bed frame or mattress and adjacent
furniture or wall.
1. Scope 2. Referenced Documents
2
2.1 ANSI Standards:
1.1 This safety specification covers safety requirements
aimed at providing cautionary labeling information for safer ANSI Z535.4 Standard for Product Safety Signs and Labels
use of inflatable air mattresses (also known as “air beds,” ANSI Z535.6 Product Safety Information in Product
collectively referred to herein as “inflatable air mattresses”). Manuals, Instructions, and Other Collateral Materials
The intent of this safety specification is to reduce child (infant)
3. Safety Requirements
injuries and fatalities caused by suffocation on inflatable air
mattresses. 3.1 Soft and hard outer retail packaging or storage
container, or both, of the product shall, on the principal display
1.2 This safety specification covers all size inflatable air
panel, include all of the cautionary information in accordance
mattresses—including but not limited to full, queen, king, and
with 5.2. Each mattress shall have a permanent label or
twin sizes.
sewed-on tag located in a conspicuous location stating all of
1.3 This safety specification does not cover inflatable air
the cautionary information in accordance with 5.2.
mattresses designed specifically for use in Durable Infant
3.2 On product labels with cautionary information shall be
Products.
in contrasting color(s) to the background, permanent, and
1.4 This safety specification is intended to reduce entrap-
conspicuous.
ment hazards to children and risk of suffocation to infants up to
3.3 OnproductlabelsshalluseANSIZ535.4asaguidewith
and including age 15 months.
respect to legibility, type of lettering, color, and symbol. A
1.5 This safety specification includes inflatable air mat-
sample label is shown in Fig. 1.
tresses intended for recreational, camping, and other indoor
3.4 The cautionary information may also be enhanced by
and outdoor uses.
different text or graphics.
1.6 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the 4. Safety Instructions
responsibility of the user of this standard to establish appro-
4.1 ANSI Z535.6 shall be used as a guide with respect to the
priate safety and health practices and determine the applica-
format and location of this information.
bility of regulatory limitations prior to use.
4.2 Instruction manuals provided with each inflatable air
mattress shall include all of the following cautionary informa-
1
This specification is under the jurisdiction of ASTM Committee F15 on
tion:
Consumer Products and is the direct responsibility of Subcommittee F15.63 on
Inflatable Air Mattresses.
2
Current edition approved March 1, 2014. Published March 2014. DOI: 10.1520/ Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
F2755-14. 4th Floor, New York, NY 10036, http://www.ansi.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F2755−14
FIG. 1Packaging and Mattress Label (1 in. = 2.54 cm)
4.2.1 Infants have suffocated on inflatable mattresses. Never 5.2 In warning statements, the safety alert symbol “"” and
place infant aged birth to 15 months to sleep on this inflatable the word “ WARNING ” shall not be less than 0.24 in. (6 mm)
air mattress/air bed. Infants can suffocate on an underinflated high.The remainder of the text shall be characters whose upper
or deflated mattress, on bedding, by co-sleeping with another case shall be at least 0.12 in. (3 mm) high.
person, and by entrapment between the mattress and bed frame
5.2.1 “"” WARNING: Risk of Suffocation.
or between the mattress and a vertical surface.
5.3 The warning statements shall clearly convey the follow-
4.2.2 Children can be entrapped between the inflatable
ing:
mattress and an adjacent vertical surface. Provide at least a
5.3.1 Infants have suffocated on inflatable mattresses.
shoulder width space between th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F2813-18(2023)(Specification)
Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables

ABSTRACT
This specification covers performance requirements to ensure the use of safety glass when employed as an unenclosed horizontal surface under 44 in. (1118 mm) in height in a desk or table. It is intended to minimize the likelihood of serious cutting and piercing injuries that may occur due to the breakage of glass used as a horizontal surface in desks and dining, coffee, end, display, mobile, outdoor, and other types of tables. Glass shall be laminated safety glass or tempered safety glass that complies with the following: performance criteria of ANSI Z97.1-2009 and the use of monolithic annealed, monolithic chemically strengthened or monolithic wired glass shall not be permitted with the exception of glass fully-supported by and bonded to a non-glass material and glass surfaces incorporating or constituting display screens.
SCOPE
1.1 This specification covers performance requirements of glass used as an unenclosed horizontal surface under 44 in. (1118 mm) in height in a desk or table.  
1.2 Units—The values stated in inch pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The following safety hazards caveat pertains only to the test methods referenced in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM F3096-23(Specification)
Standard Performance Specification for Tipover Restraint(s) Used with Clothing Storage Unit(s)

ABSTRACT
This safety specification establishes the performance requirements for tipover restraint(s) used with clothing storage unit(s). It is intended to assess the strength of the tipover restraint only, and does not address the in situ performance of the tipover restraint. This specification also defines the test method for tipover restraints, along with installation instructions and labeling requirements.
SCOPE
1.1 This safety specification is intended to define the test method and other requirements for tipover restraints as required in Specification F2057.  
1.2 This specification assesses the strength of the tipover restraint only, and does not address the in situ performance of the tipover restraint.  
1.3 The values stated in inch‐pounds units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 The following safety hazard caveat pertains only to the test procedure portion, Section 4, of this safety specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM F2057-23(Specification)
Standard Safety Specification for Clothing Storage Units

ABSTRACT
This safety specification is intended to reduce injuries and deaths of children from hazards associated with tipover of clothing storage units, it covers chests, drawer chests, chests of drawers, dressers, and bureaus only. The procedures for stability testing of the drawer are presented in details. During the test, the unit shall not tip over or be supported only by an opened drawer, opened door, or opened or unopened flap.
SCOPE
1.1 This safety specification is intended to reduce injuries and deaths of children from hazards associated with tipover of free-standing clothing storage units, including but not limited to chests, chests of drawers, drawer chests, armoires, chifferobes, bureaus, door chests, and dressers, which are 27 in. (686 mm) or greater in height, 30 lb (13.6 kg) or greater in mass, and contain 3.2 ft3 (90.6 dm3) or greater of enclosed storage volume.  
1.2 This safety specification does not cover shelving units, such as bookcases or entertainment furniture, office furniture, dining room furniture, jewelry armoires, underbed drawer storage units, occasional/accent furniture not intended for bedroom use, laundry storage/sorting units, or built-in units intended to be permanently attached to the building, nor does it cover “Clothing Storage Chests” as defined in Consumer Safety Specification F2598.  
1.3 This safety specification is intended to cover children up to 72 months. See Note 1.
Note 1: The majority (approximately 80 %) of deaths relate to children 5 years or younger.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 The following safety hazards caveat pertains only to the test procedure portion, Section 9, of this safety specification:  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    22 pages
    English language
    sale 15% off
  • Technical specification
    22 pages
    English language
    sale 15% off
ASTM
ASTM F1917-23(Specification)
Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories

SCOPE
1.1 This consumer safety performance specification establishes safety performance requirements, test methods, and requirements for labeling to minimize the identified hazards to children presented by infant bedding and related accessories as identified in the introduction.  
1.2 Infant bedding and related accessories includes the following items intended for use in a nursery: fitted sheets, blankets, dust ruffles, covers and drapes for canopies, pillows, mattress covers, diaper stackers, fabric wall hangings, crib bumper/liners, and comforters.  
1.3 No infant bedding or related accessory produced after the approval date of the consumer safety performance specification shall indicate, either by label or other means, compliance with this specification unless it conforms to all applicable requirements contained herein.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM F2906-23(Specification)
Standard Consumer Safety Specification for Bedside Sleepers

ABSTRACT
This specification is intended for consumer safety and establishes performance requirements, test methods, and marking requirements to promote safe use of bedside sleepers. It explains the test methods that are conducted on all bedside sleepers, namely the product disengagement test method, the product disengagement rationale, and the folding latch test method.
SCOPE
1.1 This consumer safety specification establishes performance requirements, test methods, and marking requirements to promote safe use of bedside sleepers.  
1.2 This consumer safety specification is intended to minimize the risk of injury to an infant from the normal use and reasonably foreseeable misuse of a bedside sleeper.  
1.3 This consumer safety performance specification covers products intended to provide sleeping space for an infant up to approximately 5 months of age (or when child begins to push up on hands and knees). These products are intended to be secured to the side of an adult bed for the purpose of having a baby sleep in close proximity to an adult.  
1.4 No bedside sleeper produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein.  
1.5 This consumer safety performance specification is not intended to address incidents and injuries resulting from alteration or unreasonable abuse or misuse of the product by a child or child care provider.  
1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.7 The following precautionary caveat pertains only to the test method portion, Section 6 of this consumer safety performance specification. This standard may involve the use of hazardous materials, operations and equipment.  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    6 pages
    English language
    sale 15% off
  • Technical specification
    6 pages
    English language
    sale 15% off
ASTM
ASTM F2613-22(Specification)
Standard Consumer Safety Specification for Children's Chairs and Stools

SCOPE
1.1 This consumer safety specification establishes testing requirements for structural integrity and performance requirements for children’s chairs and stools. It also provides requirements for labeling. The standard does not apply to products used in a commercial setting or to products that do not have a rigid frame such as bean bag chairs or foam chairs. This standard does not apply to seats with restraint systems, infant or infant/toddler rockers, children’s step stools, or children’s potty chairs. The term unit or product will refer to a child’s chair or stool.  
1.2 This specification covers a chair or stool intended to be used by a single child who can get in and get out of the product unassisted and with a seat height 15 in. or less, with or without a rocking base.  
1.3 No product produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before and after all testing.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    12 pages
    English language
    sale 15% off
  • Technical specification
    12 pages
    English language
    sale 15% off
ASTM
ASTM F2755-22(Specification)
Standard Safety Specification for Safety Labeling of Inflatable Air Mattresses

SCOPE
1.1 This safety specification provides safety labeling requirements for use of inflatable air mattresses (also known as “air beds,” collectively referred to herein as “product”).  
1.2 The intent of this safety specification is to reduce infant and child deaths and injuries caused by suffocation and entrapment on inflatable air mattresses.  
1.3 This safety specification covers all product sizes, including, but not limited to, full, queen, king, and twin sizes.  
1.4 This safety specification covers products intended for indoor and outdoor use, including camping and recreational uses.  
1.5 This safety specification does not cover products designed specifically for use in Durable Infant and Toddler Products (such as play yards, cribs, non-full-size cribs, etc.).  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F2598-22(Specification)
Standard Consumer Safety Specification for Sealed Storage Chests such as Cedar Chests, Hope Chests, Blanket Chests, Keepsake Chests

ABSTRACT
This specification deals with consumer safety for clothing storage chests. It is intended to minimize the incidents and injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of these chests. The design of the lid support, closures, and locks shall conform to their performance requirements. Test methods shall be done for lid support mechanisms and closures. Finishes and materials used in the construction of the chests shall be nonhazardous. All paints and coatings shall comply with the limitations of antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium.
SCOPE
1.1 This consumer safety specification covers the performance requirements and test methods to ensure the safety of chests.  
1.2 This consumer safety specification is intended to minimize the incidents and injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of these chests.  
1.3 This consumer safety specification applies to products commonly known as cedar chests, hope chests, blanket chests, and keepsake chests, or other similar closed rigid boxes designed and marketed as sealed storage containers for clothes, blankets, linens, keepsake or other household items. Products subject to these requirements are:  
1.3.1 Those with a single volume of 1.1 ft3  (0.031 m3) or more measured with all removable shelves or compartments removed from the product, and  
1.3.2 Those intended to create a tightly sealed storage space when the lid is closed for purposes such as the prevention of insect infestation and dust or dirt contamination.  
1.4 No chest produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.  
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.6 The following precautionary caveat pertains only to the test methods portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F404-21(Specification)
Standard Consumer Safety Specification for High Chairs

SCOPE
1.1 This consumer safety specification covers the performance requirements and methods of test to ensure the satisfactory performance of the high chair and high chairs created by using a high chair conversion kit and component(s) from another product.  
1.2 This consumer safety specification is intended to minimize injuries to children resulting from normal usage and reasonably foreseeable misuse or abuse of high chairs.  
Note 1: This consumer safety specification is not intended to address accidents and injuries resulting from the interaction of older children with children in the high chair or the accidents resulting from abuse and misuse by persons over three years of age.  
1.3 No high chair or high chair conversion kit produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 2: This consumer safety specification includes the following sections:    
Title  
Section  
Scope  
1  
Referenced Documents  
2  
Terminology  
3  
Calibration and Standardization  
4  
General Requirements  
5  
Compliance When Used With
Conversion Kits  
5.3  
Threaded Fasteners  
5.5  
Latching or Locking Mechanisms  
5.9  
Labeling  
5.10  
Openings  
5.11  
Toys  
5.12  
Performance Requirements  
6  
Protective Components  
6.1  
Removable Tray or Front Torso Support
Performance Integrity  
6.2  
Tray or Front Torso Support Performance –
Pull Test  
6.3  
Static Load  
6.4  
Stability  
6.5  
Exposed Coil Springs  
6.6  
Scissoring, Shearing, and Pinching  
6.7  
Restraint System  
6.8  
Passive Crotch Restraint System  
6.9  
Structural Integrity  
6.10  
Tray Latch Release Mechanisms  
6.11  
Side Containment  
6.12  
Protrusions  
6.13  
Test Methods  
7  
Locking Mechanisms  
7.1  
Protective Components  
7.2  
Tray or Front Torso Support – Drop Test  
7.3  
Tray or Front Torso Support Disengagement –
Horizontal Pull Test  
7.4  
Tray or Front Torso Support Disengagement –
Vertical Pull Test  
7.5  
Static Load Testing  
7.6  
Stability Testing  
7.7  
Restraint System Retention Test  
7.8  
Permanency of Labels and Warnings  
7.9  
Dynamic High Chair Test  
7.10  
Completely Bounded Openings  
7.11  
Tray Latch Release Mechanism – Accessibility  
7.12  
Side Containment Openings  
7.14  
Marking and Labeling  
8  
Instructional Literature  
9  
Keywords  
10  
Rationale  
Appendix X1  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    28 pages
    English language
    sale 15% off
  • Technical specification
    28 pages
    English language
    sale 15% off
ASTM
ASTM F2933-21a(Specification)
Standard Consumer Safety Specification for Crib Mattresses

ABSTRACT
This consumer safety specification establishes design requirements, testing requirements and methods, and requirements for labeling for full-size and non-full-size crib mattresses. Crib mattress produced after the approval date of this specification shall be deemed non-compliant unless it conforms to all requirements described by the specification. The standard covers calibration and standardization, test methods, and marking and labeling.
SCOPE
1.1 This consumer safety specification establishes design requirements, testing requirements and methods, and requirements for labeling for full-size crib mattresses, non-full-size crib mattresses, and after-market mattresses for play yards and non-full size cribs.  
1.2 No crib mattress produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein.  
1.3 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    8 pages
    English language
    sale 15% off
  • Technical specification
    8 pages
    English language
    sale 15% off