ASTM A106/A106M-10
(Specification)Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ABSTRACT
This specification covers carbon steel pipe for high-temperature service. These pipes are suitable for welding, bending, flanging, and similar forming operations. Mechanical testing of the specimens shall include tensile, bending, flattening, hydrostatic and nondestructive electric tests. Specimens undergoing bending tests shall consist of sections cut from a pipe. For flattening tests, the specimens shall be smooth on the ends and burr-free, except when made on crop ends. All tests shall be performed in room temperature. If any test specimen shows flaws it can be discarded and substituted for another test specimen. Before testing, if a specimen has scribe scratches, a retest shall be allowed. A retest shall also be allowed if a specimen breaks in an inside or outside surface flaw.
SCOPE
1.1 This specification covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1/8 to NPS 48 [DN 6 to DN 1200] (Note 2) inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.
Note 1—It is suggested, consideration be given to possible graphitization.
Note 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”
1.2 Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Used in USDOE-NE standards
Designation: A106/A106M – 10
Standard Specification for
1
Seamless Carbon Steel Pipe for High-Temperature Service
This standard is issued under the fixed designationA106/A106M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* 2. Referenced Documents
2 3
2.1 ASTM Standards:
1.1 This specification covers seamless carbon steel pipe for
1
high-temperature service (Note 1)inNPS ⁄8 to NPS 48 [DN 6 A530/A530M Specification for General Requirements for
to DN 1200] (Note 2) inclusive, with nominal (average) wall Specialized Carbon and Alloy Steel Pipe
thickness as given inASME B 36.10M. It shall be permissible E213 Practice for Ultrasonic Testing of Metal Pipe and
to furnish pipe having other dimensions provided such pipe Tubing
complies with all other requirements of this specification. Pipe E309 Practice for Eddy-Current Examination of Steel Tu-
ordered under this specification shall be suitable for bending, bular Products Using Magnetic Saturation
flanging, and similar forming operations, and for welding. E381 Method of Macroetch Testing Steel Bars, Billets,
Whenthesteelistobewelded,itispresupposedthatawelding Blooms, and Forgings
procedure suitable to the grade of steel and intended use or E570 Practice for Flux Leakage Examination of Ferromag-
service will be utilized. netic Steel Tubular Products
2.2 ASME Standard:
NOTE 1—It is suggested, consideration be given to possible graphitiza-
ASME B 36.10M Welded and Seamless Wrought Steel
tion.
4
Pipe
NOTE 2—The dimensionless designator NPS (nominal pipe size) [DN
2.3 Military Standards:
(diameter nominal)] has been substituted in this standard for such
5
traditional terms as “nominal diameter,” “size,” and “nominal size.”
MIL-STD-129 Marking for Shipment and Storage
MIL-STD-163 Steel Mill Products, Preparation for Ship-
1.2 Supplementary requirements of an optional nature are
5
ment and Storage
provided for seamless pipe intended for use in applications
2.4 Federal Standard:
where a superior grade of pipe is required. These supplemen-
5
Fed. Std. No. 123 Marking for Shipments (CivilAgencies)
tary requirements call for additional tests to be made and when
Fed.Std.No.183 ContinuousIdentificationMarkingofIron
desired shall be so stated in the order.
5
and Steel Products
1.3 The values stated in either SI units or inch-pound units
2.5 Other Standards:
are to be regarded separately as standard. The values stated in
6
SSPC-SP 6 Surface Preparation Specification No. 6
each system may not be exact equivalents; therefore, each
system shall be used independently of the other. Combining
3. Ordering Information
values from the two systems may result in non-conformance
3.1 The inclusion of the following, as required will describe
with the standard.
the desired material adequately, when ordered under this
1.4 The following precautionary caveat pertains only to the
specification:
test method portion, Sections 11, 12, and 13 of this specifica-
3.1.1 Quantity (feet, metres, or number of lengths),
tion:Thisstandarddoesnotpurporttoaddressallofthesafety
3.1.2 Name of material (seamless carbon steel pipe),
concerns, if any, associated with its use. It is the responsibility
3.1.3 Grade (Table 1),
of the user of this standard to establish appropriate safety and
health practices and determine the applicability of regulatory
limitations prior to use. 3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
1
This specification is under the jurisdiction of Committee A01 on Steel, the ASTM website.
4
Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee Available from American Society of Mechanical Engineers (ASME), ASME
A01.09 on Carbon Steel Tubular Products. International Headquarters, Three Park Ave., New York, NY 10016-5990, http://
Current edition approved Oct. 1, 2010. Published November 2010. Originally www.asme.org.
5
approved in 1926. Last previous edition in 2008 as A106/A106M– 08. DOI: Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,
10.1520/A0106_A0106M-10. Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.
2 6
For ASME Boiler and Pressure Vessel Code applications see related Specifi- Available from Society for Protective Coatings (SSPC), 40 24th St., 6th Floor,
cations SA-106 in Section II of that Code. Pittsburgh, PA 15222-4656, http://www.
...
This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Used in USDOE-NE standards
Designation:A106/A106M–08 Designation: A106/A106M – 10
Standard Specification for
1
Seamless Carbon Steel Pipe for High-Temperature Service
This standard is issued under the fixed designationA106/A106M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
2
1
1.1 This specification covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS ⁄8 to NPS 48 [DN 6 to
DN1200](Note2)inclusive,withnominal(average)wallthicknessasgiveninASMEB 36.10M.Itshallbepermissibletofurnish
pipehavingotherdimensionsprovidedsuchpipecomplieswithallotherrequirementsofthisspecification.Pipeorderedunderthis
specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be
welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.
NOTE 1—It is suggested, consideration be given to possible graphitization.
NOTE 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional
terms as “nominal diameter,” “size,” and “nominal size.”
1.2 Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a
superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall
be so stated in the order.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each
system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the
two systems may result in non-conformance with the standard.
1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification:
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the
user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations
prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
A530/A530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
2.2 ASME Standard:
4
ASME B 36.10M Welded and Seamless Wrought Steel Pipe
2.3 Military Standards:
5
MIL-STD-129 Marking for Shipment and Storage
5
MIL-STD-163 Steel Mill Products, Preparation for Shipment and Storage
2.4 Federal Standard:
1
This specification is under the jurisdiction of Committee A01 on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.09 on
Carbon Steel Tubular Products.
Current edition approved July 15, 2008. Published August 2008. Originally approved in 1926. Last previous edition in 2006 as A106/A106M– 06a. DOI:
10.1520/A0106_A0106M-08.
Current edition approved Oct. 1, 2010. Published November 2010. Originally approved in 1926. Last previous edition in 2008 as A106/A106M– 08. DOI:
10.1520/A0106_A0106M-10.
2
For ASME Boiler and Pressure Vessel Code applications see related Specifications SA-106 in Section II of that Code.
3
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. ForAnnualBookofASTMStandards
volume information, refer to the standard’s Document Summary page on the ASTM website.
4
Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Three Park Ave., New York, NY 10016-5990, http://
www.asme.org.
5
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
...
This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Used in USDOE-NE standards
Designation:A106/A106M–08 Designation: A106/A106M – 10
Standard Specification for
1
Seamless Carbon Steel Pipe for High-Temperature Service
This standard is issued under the fixed designationA106/A106M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
2
1
1.1 This specification covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS ⁄8 to NPS 48 [DN 6 to
DN1200](Note2)inclusive,withnominal(average)wallthicknessasgiveninASMEB 36.10M.Itshallbepermissibletofurnish
pipehavingotherdimensionsprovidedsuchpipecomplieswithallotherrequirementsofthisspecification.Pipeorderedunderthis
specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be
welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.
NOTE 1—It is suggested, consideration be given to possible graphitization.
NOTE 2—The dimensionless designator NPS (nominal pipe size) [DN (diameter nominal)] has been substituted in this standard for such traditional
terms as “nominal diameter,” “size,” and “nominal size.”
1.2 Supplementary requirements of an optional nature are provided for seamless pipe intended for use in applications where a
superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall
be so stated in the order.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each
system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the
two systems may result in non-conformance with the standard.
1.4 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, and 13 of this specification:
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the
user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations
prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
A530/A530M Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing
E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
2.2 ASME Standard:
4
ASME B 36.10M Welded and Seamless Wrought Steel Pipe
2.3 Military Standards:
5
MIL-STD-129 Marking for Shipment and Storage
5
MIL-STD-163 Steel Mill Products, Preparation for Shipment and Storage
2.4 Federal Standard:
1
This specification is under the jurisdiction of Committee A01 on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.09 on
Carbon Steel Tubular Products.
Current edition approved July 15, 2008. Published August 2008. Originally approved in 1926. Last previous edition in 2006 as A106/A106M– 06a. DOI:
10.1520/A0106_A0106M-08.
Current edition approved Oct. 1, 2010. Published November 2010. Originally approved in 1926. Last previous edition in 2008 as A106/A106M– 08. DOI:
10.1520/A0106_A0106M-10.
2
For ASME Boiler and Pressure Vessel Code applications see related Specifications SA-106 in Section II of that Code.
3
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. ForAnnualBookofASTMStandards
volume information, refer to the standard’s Document Summary page on the ASTM website.
4
Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Three Park Ave., New York, NY 10016-5990, http://
www.asme.org.
5
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.