ASTM F468-01a

Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

SCOPE
1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.
1.2 Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F 467.
Note 1—A complete metric companion to Specification F 468 has been developed-F 468M; therefore no metric equivalents are presented in this specification.

General Information

• Status: Historical
• Publication Date: 09-Oct-2001
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: F16 - Fasteners
• Drafting Committee: F16.04 - Nonferrous Fasteners

Relations

• Replaces: ASTM F468-01e1 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
• Effective Date: 10-Oct-2001
• Replaced By: ASTM F468-03 - Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
• Effective Date: 10-May-2003
• Referred By: ASTM F467-13(2018) - Standard Specification for Nonferrous Nuts for General Use
• Effective Date: 10-Oct-2001
• Referred By: ASTM C1802-23 - Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
• Effective Date: 10-Oct-2001
• Referred By: ASTM B745/B745M-15(2021) - Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1155-10(2019) - Standard Practice for Selection and Application of Piping System Materials
• Effective Date: 10-Oct-2001
• Referred By: ASTM B746/B746M-22 - Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
• Effective Date: 10-Oct-2001
• Referred By: ASTM F998-12(2022) - Standard Specification for Centrifugal Pump, Shipboard Use
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1370-92(2019)e1 - Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1508-96(2021) - Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
• Effective Date: 10-Oct-2001
• Referred By: ASTM F1718-01(2019) - Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
• Effective Date: 10-Oct-2001

Standards Content (Sample)

NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: F 468 – 01a
Standard Specification for
Nonferrous Bolts, Hex Cap Screws, and Studs for General
1
Use
This standard is issued under the fixed designation F 468; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
8
1. Scope Aluminum Base Alloys
E 38 Methods for Chemical Analysis of Nickel-Chromium
1.1 This specification covers the requirements for commer-
9
and Nickel-Chromium-Iron Alloys
cial wrought nonferrous bolts, hex cap screws, and studs 0.250
E 53 Test Methods for Determination of Copper in Unal-
to 1.500 in. inclusive in diameter manufactured from a number
8
loyed Copper by Gravimetry
of alloys in common use and intended for general service
E 54 Test Methods for Chemical Analysis of Special
applications.
8
Brasses and Bronzes
1.2 Applicable nuts for use with bolts, cap screws, and studs
E 55 Practice for Sampling Wrought Nonferrous Metals and
covered by this specification are covered by Specification
8
Alloys for Determination of Chemical Composition
F 467.
E 62 Test Methods for Chemical Analysis of Copper and
NOTE 1—A complete metric companion to Specification F 468 has been 8
Copper Alloys (Photometric Methods)
developed—F 468M; therefore no metric equivalents are presented in this
E 75 Test Methods for Chemical Analysis of Copper-Nickel
specification.
8
and Copper-Nickel-Zinc Alloys
E 76 Test Methods for Chemical Analysis of Nickel-Copper
2. Referenced Documents
8
Alloys
2.1 ASTM Standards:
E 92 Test Method for Vickers Hardness of Metallic Mate-
B 154 Test Method for Mercurous Nitrate Test for Copper
6
2 rials
and Copper Alloys
E 101 Test Method for Spectrographic Analysis of Alumi-
B 193 Test Method for Resistivity of Electrical Conductor
3 num and Aluminum Alloys by the Point-to-Plane Tech-
Materials
10
nique
B 211 Specification for Aluminum and Aluminum-Alloy
4 E 120 Test Methods for Chemical Analysis of Titanium and
Bar, Rod, and Wire
8
Titanium Alloys
B 565 Test Method for Shear Testing of Aluminum and
11
E 165 Test Method for Liquid Penetrant Examination
Aluminum-Alloy Rivets and Cold-Heading Wire and
4 E 227 Test Method for Optical Emission Spectrometric
Rods
5 Analysis of Aluminum and Aluminum Alloys by the
D 3951 Practice for Commercial Packaging
8
Point-to-Plane Technique
6
E 8 Test Methods of Tension Testing of Metallic Materials
E 354 Test Methods for Chemical Analysis of High-
E 18 Test Methods for Rockwell Hardness and Rockwell
Temperature, Electrical, Magnetic, and Other Similar Iron,
6
Superficial Hardness of Metallic Materials
8
Nickel, and Cobalt Alloys
E 29 Practice for Using Significant Digits in Test Data to
E 478 Test Methods for Chemical Analysis of Copper
7
Determine Conformance with Specifications
8
Alloys
E 34 Test Methods for Chemical Analysis of Aluminum and
E 1409 Test Method for Determination of Oxygen in Tita-
nium and Titanium Alloys by the Inert Gas Fusion Tech-
1
This specification is under the jurisdiction of ASTM Committee F16 on
8
nique
Fasteners and is the direct responsibility of Subcommittee F16.04 on Nonferrous
12
F 467 Specification for Nonferrous Nuts for General Use
Fasteners.
Current edition approved October 10, 2001. Published December 2001. Origi- F 606 Test Methods for Determining the Mechanical Prop-
nally published as F 468 – 76 T. Last previous edition F 468 – 01e1.
erties of Externally and Internally Threaded Fasteners,
2
Annual Book of ASTM Standards, Vol 02.01.
3
Annual Book of ASTM Standards, Vol 02.03.
4
8
Annual Book of ASTM Standards, Vol 02.02.
Annual Book of ASTM Standards, Vol 03.05.
5
9
Annual Book of ASTM Standards, Vol 15.09.
Discontinued 1989; Replaced by E 350.
6
10
Annual Book of ASTM Standards, Vol 03.01.
Discontinued; see 1995 Annual Book of ASTM Standards, Vol 03.05.
7
11
Annual Book of ASTM Standards, Vol 14.02.
Annual Book of ASTM Standards, Vol 03.03.
12
Annual Book of ASTM Standards, Vol 01.08.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
F 468
12
Washers, and Rivets that the finished products conform to all of the specified
F 1470 Guide for Fastener Sampling for Specified Mechani- requirements.
12
cal Properties and Performance Inspection 4.2 Manufacture:
2.2 ASME Standards: 4.2.1 Forming—Unless otherwise specified, the fasteners
shall be c
...