ASTM F2043-09

Standard Classification for Bicycle Usage

SIGNIFICANCE AND USE
This classification provides a uniform set of usage definitions within the bicycle industry. Included within this classification is a set of graphical indicators to provide retailers and consumers with an indication of the intended use of a particular bicycle or aftermarket components.
SCOPE
1.1 1.1 This classification covers bicycle usage conditions and a system of identifying bicycles and components for use within that system.
1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 31-Dec-2008
• ICS: 43.150 - Cycles
• Technical Committee: F08 - Sports Equipment, Playing Surfaces, and Facilities
• Drafting Committee: F08.10 - Bicycles

Relations

• Replaces: ASTM F2043-00 - Standard Classification for Bicycle Usage
• Effective Date: 01-Jan-2009
• Replaced By: ASTM F2043-13 - Standard Classification for Bicycle Usage
• Effective Date: 01-Nov-2013
• Referred By: ASTM F2273-11(2016) - Standard Test Methods for Bicycle Forks
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2793-14(2023) - Standard Specification for Bicycle Grips
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2843-19 - Standard Specification for Condition 0 Bicycle Frames
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2268-03(2015) - Standard Specification for Bicycle Serial Numbers
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2868-19 - Standard Specification for Condition 2 Bicycle Frames
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2917-12(2018) - Standard Specification for Bicycle Trailer Cycles Designed for Human Passengers
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2614-19 - Standard Specification for Condition 3 Bicycle Frames
• Effective Date: 01-Jan-2009
• Referred By: ASTM F1447-18 - Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2802-19 - Standard Specification for Condition 1 Bicycle Frames
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2899-11(2016) - Standard Specification for Condition 1 Bicycle Forks
• Effective Date: 01-Jan-2009
• Referred By: ASTM F2274-11(2016) - Standard Specification for Condition 3 Bicycle Forks
• Effective Date: 01-Jan-2009

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F2043 −09 AnAmerican National Standard
Standard Classification for
1
Bicycle Usage
This standard is issued under the fixed designation F2043; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 4. Significance and Use
1.1 1.1 This classification covers bicycle usage conditions 4.1 This classification provides a uniform set of usage
and a system of identifying bicycles and components for use definitions within the bicycle industry. Included within this
within that system. classification is a set of graphical indicators to provide retailers
and consumers with an indication of the intended use of a
1.2 The values stated in SI units are to be regarded as the
particular bicycle or aftermarket components.
standard. The values in parentheses are for information only.
5. Basis of Classification
2. Referenced Documents
5.1 Uses:
2
2.1 Federal Standard:
5.1.1 Condition 0—This is a set of conditions for operation
16 CFR 1512 Title 16—Commercial Practices, Chapter
of a children’s bicycle under appropriate parental supervision
11—Consumer Product Safety Commission, Part 1512—
in a manner consistent with the child’s bicycling skills.
Requirements for Bicycles
Bicycles intended for this use are “sidewalk bicycles.” In
addition, bicycles intended for this condition are limited to
3. Terminology
riders at least three years old and weighing less than 36 kg (80
lb). Bicycles intended for this use classification shall be
3.1 Definitions:
identified in accordance with the labeling requirements of
3.1.1 aftermarket, n—components intended to be fitted to a
Section 6 using the graphical symbol (icon) illustrated in Fig.
bicyclebutnotincludedasoriginalequipmentwiththebicycle.
1. The icon in this figure is black on a white background with
3.1.2 bicycle, n—two-wheeled, single-track, articulated ve-
a black border.
hicle that is solely human powered.
5.1.2 Condition 1—This is a set of conditions for the
3.1.3 components, n—devices or equipment added to a
operation of a bicycle on a regular paved surface or smooth
bicycle frame to render it a complete, functional unit (for
unpaved surfaces where the tires may unintentionally lose
example, brakes, shifters, gears, and so forth).
ground contact. Bicycles intended for this use classification
3.1.4 conditions, n—generalized description of surface en-
shall be identified in accordance with the labeling requirements
vironments and speeds where a bicycle may be ridden.
of Section 6 using the graphical symbol (icon) illustrated in
Fig. 2. The icon in this figure is green on a white background
3.1.5 jump, n—event when both bicycle wheels leave the
with a black border.
ground in which the height of a jump is the maximum height
5.1.3 Condition 2—This is a set of conditions for the
above ground of the lowest point of the higher wheel when
operation of a bicycle that includes Condition 1 as well as
both wheels are off the ground.
unpaved and gravel roads and trails with moderate grades. In
3.1.6 sidewalk bicycle, n—bicycle meeting the definition of
this set of conditions, contact with irregular terrain and loss of
a sidewalk bicycle as defined in 16 CFR 1512.
tire contact with the ground may occur. Jumps should be
3.1.7 technical, adj—riding environment requiring rapid
limited to 30 cm (12 in.) or less. Bicycles intended for this use
changes in speed, direction, and balance.
classification shall be identified in accordance with the labeling
requirements of Section 6 using the graphical symbol (icon)
illustrated in Fig. 3. The icon in this figure is green on a white
1
This classification is under the jurisdiction ofASTM Committee F08 on Sports
background with a black border.
Equipment and Facilitiesand is the direct responsibility of Subcommittee F08.10 on
5.1.4 Condition 3—This is a set of conditions for operation
Bicycles.
of a bicycle that includes Condition 1 and Condition 2 as well
Current edition approved Jan. 1, 2009. Published February 2009. Originally
approved in 2000. Last previous edition approved in 2000 as F2043 – 00. DOI:
as rough trails, rough unpaved roads, and rough technical areas
10.1520/F2043-09.
and unimproved trails. Jumps of 60 cm (24 in.) or less are
2
Available from U.S. Government Printing Office Superintendent of Documents,
anticipated. Bicycles intended for this use classification shall
732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http://
www.access.gpo.gov. be identified in accordance with the labeling requirements of
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

--------------
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:F2043–00 Designation: F 2043 – 09
Standard Classification for
1
Bicycle Usage
This standard is issued under the fixed designation F 2043; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1This classification covers bicycle usage conditions.
1.1 1.1 This classification covers bicycle usage conditions and a system of identifying bicycles and components for use within
that system.
1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
2. Referenced Documents
2
2.1 Federal Standard:
16 CFR 1512 Title 16—Commercial Practices, Chapter 11—Consumer Product Safety Commission, Part 1512—Requirements
for Bicycles
3. Terminology
2.1
3.1 Definitions:
2.1.1bicycle—a two wheeled, single track, articulated vehicle that is solely human powered.
2.1.2conditions—a generalized description of surface environments and speeds where a bicycle may be ridden.
2.1.3technical
3.1.1 aftermarket, n—components intended to be fitted to a bicycle but not included as original equipment with the bicycle.
3.1.2 bicycle, n—two-wheeled, single-track, articulated vehicle that is solely human powered.
3.1.3 components, n—devices or equipment added to a bicycle frame to render it a complete, functional unit (for example,
brakes, shifters, gears, and so forth).
3.1.4 conditions, n—generalized description of surface environments and speeds where a bicycle may be ridden.
3.1.5 jump, n—event when both bicycle wheels leave the ground in which the height of a jump is the maximum height above
ground of the lowest point of the higher wheel when both wheels are off the ground.
3.1.6 sidewalk bicycle, n—bicycle meeting the definition of a sidewalk bicycle as defined in 16 CFR 1512.
3.1.7 technical, adj—riding environment requiring rapid changes in speed, direction, and balance.
3.Significance and Use
3.1This classification provides a uniform set of usage definitions within the bicycle industry.
4. Significance and Use
4.1 This classification provides a uniform set of usage definitions within the bicycle industry. Included within this classification
is a set of graphical indicators to provide retailers and consumers with an indication of the intended use of a particular bicycle or
aftermarket components.
5. Basis of Classification
4.1
5.1 Uses:
4.1.1
5.1.1 Condition 0—This is a set of conditions for operation of a children’s bicycle under appropriate parental supervision in a
1
This classification is under the jurisdiction of ASTM Committee F08 on Sports Equipment and Facilities and is the direct responsibility of Subcommittee F08.10 on
Bicycles.
Current edition approved July 10, 2000. Published August 2000.
Current edition approved Jan. 1, 2009. Published February 2009. Originally approved in 2000. Last previous edition approved in 2000 as F 2043 – 00.
2
Available from U.S. Government Printing Office Superintendent of Documents, 732 N. Capitol St., NW, Mail Stop: SDE, Washington, DC 20401, http://
www.access.gpo.gov.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F2043–09
manner consistent with the child’s bicycling skills. Bicycles intended for this use are “sidewalk bicycles.” In addition, bicycles
intended for this condition are limited to riders at least three years old and weighing less than 36 kg (80 lb). Bicycles intended for
this use classification shall be identified in accordance with the labeling requirements of Section 6 using the graphical symbol
(icon) illustrated in Fig. 1. The icon in this figure is black on a white background with a black border.
5.1.2 Condition 1—Aset of conditions for operation of a bicycle on a regular paved surface where the tires do not lose ground
contact.
4.1.2—This is a set of conditions for the operation of a bicycle on a regular paved surface or smooth unpaved surfaces where
the tires may unintentionally lose ground contact. Bicycles intended for this use classification shall be identified in accordance with
the labeling requirements of Section 6 using the graphical symbol (icon) illustrated in Fig. 2. The icon in this figure is green on
a white background with a black border.
5.1.3 Condition 2—Aset of condit
...