ASTM D8275-21
(Specification)Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines
SCOPE
1.1 This specification covers the requirements of test fuels suitable for use in certain gasoline compression-ignition engines and vehicles, which have been specifically designed to operate on the fuel described in this specification. These gasoline-like fuels, which may contain certain gasoline blending components, are henceforth referred to in this specification as “gasoline compression-ignition (GCI) test fuels.”
1.1.1 The GCI test fuels described by this specification are only intended for use by engine and vehicle manufacturers in the continuing development of appropriately designed compression-ignition engines that can take advantage of certain chemical and physical properties of GCI test fuels to achieve higher efficiency and lower emissions (henceforth referred to as “GCI engines”). These GCI test fuels are not intended for use by the general public.
1.1.2 GCI engines include only those engines that directly inject fuel into the combustion chamber, and rely on autoignition of the fuel to initiate combustion part or all the time. Although various combustion strategies may be used depending on the fuel and engine operating condition, the level of fuel stratification is typically decreased in GCI engines under certain operating conditions relative to traditional diesel compression-ignition engines. Engines that use an auxiliary ignition source (such as a spark plug) some but not all of the time could qualify as GCI engines.
1.1.3 The GCI test fuels covered in this specification may contain oxygenates, such as alcohols and ethers. Recommended limits on the type and concentration of specific oxygenates are provided in Appendix X3.
1.2 This specification provides a description of GCI test fuels for automotive engines that are not currently widely available to the general public, but are being developed and require defined standard test fuels. Commercial fuels meeting the same or similar requirements as the GCI test fuels described in this specification could become available to the general public if/when such engines are introduced into commerce; however use of this specification by the general public would require significant modifications. The specification is under continuous review, which can result in revisions based on changes in fuel, automotive requirements, test methods, or a combination thereof. All users of this specification, therefore, should refer to the latest edition.
1.3 Traditional diesel compression-ignition engines and fuel systems are designed for use with fuel, which has a lower volatility, higher flash-point, and higher viscosity than GCI test fuels. Such engines are therefore usually unsuitable for use with GCI test fuels. Certain hardware modifications may be required for the safe use of low flash-point, GCI test fuels.
Note 1: If there is any doubt as to the latest edition of Specification D8275, contact ASTM International Headquarters.
1.4 The values stated in SI units are to be regarded as the standard. Any other values given are provided for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D8275 −21
Standard Specification for
1
Gasoline-like Test Fuel for Compression-Ignition Engines
This standard is issued under the fixed designation D8275; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* merce; however use of this specification by the general public
would require significant modifications. The specification is
1.1 This specification covers the requirements of test fuels
under continuous review, which can result in revisions based
suitable for use in certain gasoline compression-ignition en-
on changes in fuel, automotive requirements, test methods, or
gines and vehicles, which have been specifically designed to
a combination thereof.All users of this specification, therefore,
operate on the fuel described in this specification. These
should refer to the latest edition.
gasoline-like fuels, which may contain certain gasoline blend-
ing components, are henceforth referred to in this specification 1.3 Traditionaldieselcompression-ignitionenginesandfuel
as “gasoline compression-ignition (GCI) test fuels.” systems are designed for use with fuel, which has a lower
1.1.1 The GCI test fuels described by this specification are volatility,higherflash-point,andhigherviscositythanGCItest
only intended for use by engine and vehicle manufacturers in fuels. Such engines are therefore usually unsuitable for use
the continuing development of appropriately designed with GCI test fuels. Certain hardware modifications may be
compression-ignition engines that can take advantage of cer- required for the safe use of low flash-point, GCI test fuels.
NOTE 1—If there is any doubt as to the latest edition of Specification
tain chemical and physical properties of GCI test fuels to
D8275, contact ASTM International Headquarters.
achieve higher efficiency and lower emissions (henceforth
referred to as “GCI engines”). These GCI test fuels are not 1.4 The values stated in SI units are to be regarded as the
intended for use by the general public. standard. Any other values given are provided for information
1.1.2 GCI engines include only those engines that directly only.
inject fuel into the combustion chamber, and rely on autoigni-
1.5 This standard does not purport to address all of the
tion of the fuel to initiate combustion part or all the time.
safety concerns, if any, associated with its use. It is the
Although various combustion strategies may be used depend-
responsibility of the user of this standard to establish appro-
ingonthefuelandengineoperatingcondition,theleveloffuel
priate safety, health, and environmental practices and deter-
stratification is typically decreased in GCI engines under
mine the applicability of regulatory limitations prior to use.
certain operating conditions relative to traditional diesel
1.6 This international standard was developed in accor-
compression-ignition engines. Engines that use an auxiliary
dance with internationally recognized principles on standard-
ignition source (such as a spark plug) some but not all of the
ization established in the Decision on Principles for the
time could qualify as GCI engines.
Development of International Standards, Guides and Recom-
1.1.3 The GCI test fuels covered in this specification may
mendations issued by the World Trade Organization Technical
contain oxygenates, such as alcohols and ethers. Recom-
Barriers to Trade (TBT) Committee.
mended limits on the type and concentration of specific
2. Referenced Documents
oxygenates are provided in Appendix X3.
2
1.2 This specification provides a description of GCI test 2.1 ASTM Standards:
D86 Test Method for Distillation of Petroleum Products and
fuels for automotive engines that are not currently widely
available to the general public, but are being developed and Liquid Fuels at Atmospheric Pressure
D130 Test Method for Corrosiveness to Copper from Petro-
require defined standard test fuels. Commercial fuels meeting
the same or similar requirements as the GCI test fuels leum Products by Copper Strip Test
D240 Test Method for Heat of Combustion of Liquid Hy-
described in this specification could become available to the
general public if/when such engines are introduced into com- drocarbon Fuels by Bomb Calorimeter
D381 Test Method for Gum Content in Fuels by Jet Evapo-
ration
1
This specification is under the jurisdiction of ASTM Committee D02 on
Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of
2
Subcommittee D02.A0.01 on Gasoline and Gasoline-Oxygenate Blends. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Jan
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D8275 − 19a D8275 − 21
Standard Specification for
1
Gasoline-like Test Fuel for Compression-Ignition Engines
This standard is issued under the fixed designation D8275; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
1.1 This specification covers the requirements of test fuels suitable for use in certain gasoline compression-ignition engines and
vehicles, which have been specifically designed to operate on the fuel described in this specification. These gasoline-like fuels,
which may contain certain gasoline blending components, are henceforth referred to in this specification as “gasoline
compression-ignition (GCI) test fuels.”
1.1.1 The GCI test fuels described by this specification are only intended for use by engine and vehicle manufacturers in the
continuing development of appropriately designed compression-ignition engines that can take advantage of certain chemical and
physical properties of GCI test fuels to achieve higher efficiency and lower emissions (henceforth referred to as “GCI engines”).
These GCI test fuels are not intended for use by the general public.
1.1.2 GCI engines include only those engines that directly inject fuel into the combustion chamber, and rely on autoignition of
the fuel to initiate combustion part or all the time. Although various combustion strategies may be used depending on the fuel and
engine operating condition, the level of fuel stratification is typically decreased in GCI engines under certain operating conditions
relative to traditional diesel compression-ignition engines. Engines that use an auxiliary ignition source (such as a spark plug) some
but not all of the time could qualify as GCI engines.
1.1.3 The GCI test fuels covered in this specification may contain oxygenates, such as alcohols and ethers. Recommended limits
on the type and concentration of specific oxygenates are provided in Appendix X3.
1.2 This specification provides a description of GCI test fuels for automotive engines that are not currently widely available to
the general public, but are being developed and require defined standard test fuels. Commercial fuels meeting the same or similar
requirements as the GCI test fuels described in this specification could become available to the general public if/when such engines
are introduced into commerce; however use of this specification by the general public would require significant modifications. The
specification is under continuous review, which can result in revisions based on changes in fuel, automotive requirements, test
methods, or a combination thereof. All users of this specification, therefore, should refer to the latest edition.
1.3 Traditional diesel compression-ignition engines and fuel systems are designed for use with fuel, which has a lower volatility,
higher flash-point, and higher viscosity than GCI test fuels. Such engines are therefore usually unsuitable for use with GCI test
fuels. Certain hardware modifications may be required for the safe use of low flash-point, GCI test fuels.
NOTE 1—If there is any doubt as to the latest edition of Specification D8275, contact ASTM International Headquarters.
1.4 The values stated in SI units are to be regarded as the standard. Any other values given are provided for information only.
1
This specification is under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants and is the direct responsibility of Subcommittee
D02.A0.01 on Gasoline and Gasoline-Oxygenate Blends.
Current edition approved Nov. 1, 2019Jan. 1, 2021. Published November 2019January 2021. Originally approved in 2019. Last previous edition approved in 2019 as
D8275 – 19.D8275 – 19a. DOI: 10.1520/D8275-19A.10.1520/D8275-21.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
D8275 − 21
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of
regulatory limitations prior to use.
1.6 This international standard was devel
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.