ASTM F1182-90(2001)

Standard Specification for Anodes, Sacrificial Zinc Alloy

SCOPE
1.1 This specification covers the requirements for zinc anodes in the form of slabs, plates, discs, and rods for corrosion protection (cathodic protection) of metals and alloys.
1.2 The anodes are primarily intended to reduce corrosion of surface ship and submarine hulls, steel and aluminum equipment and structures, sea chests, sonar domes, and the seawater side of condensers and other heat exchangers.
1.3 The values stated in inch-pound units are to be regarded as standard. The metric (SI) units, given in parentheses, are for information purposes only and may be approximate.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 28-Jun-1990
• ICS: 77.150.60 - Lead, zinc and tin products
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.07 - General Requirements

Relations

• Replaces: ASTM F1182-90(1996) - Standard Specification for Anodes, Sacrificial Zinc Alloy
• Effective Date: 29-Jun-1990
• Replaced By: ASTM F1182-90(2006) - Standard Specification for Anodes, Sacrificial Zinc Alloy
• Effective Date: 01-Dec-2006

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: F 1182 – 90 (Reapproved 2001)
Standard Specification for
1
Anodes, Sacrificial Zinc Alloy
This standard is issued under the fixed designation F 1182; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope MIL-STD-105 Sampling Procedures and Tables for Inspec-
tion by Attributes
1.1 This specification covers the requirements for zinc
MIL-STD-129 Marking for Shipment and Storage
anodesintheformofslabs,plates,discs,androdsforcorrosion
MIL-STD-1186 Cushioning,Anchoring,Bracing,Blocking,
protection (cathodic protection) of metals and alloys.
and Waterproofing; With Appropriate Test Methods
1.2 The anodes are primarily intended to reduce corrosion
2.4 Military Specification:
of surface ship and submarine hulls, steel and aluminum
MIL-P-15011 Pallets Material Handling, Wood Post Con-
equipment and structures, sea chests, sonar domes, and the
7
struction, 4-Way Entry
seawater side of condensers and other heat exchangers.
7
2.5 Federal Specifications:
1.3 The values stated in inch-pound units are to be regarded
PPP-B-601 Boxes, Wood, Cleated Plywood
asstandard.Themetric(SI)units,giveninparentheses,arefor
PPP-B-621 Boxes, Wood, Nailed and Lock-Corner
information purposes only and may be approximate.
PPP-B-636 Boxes, Shipping, Fiberboard
1.4 This standard does not purport to address the safety
2.6 American National Standards Institute Standard:
concerns associated with its use. It is the responsibility of the
ANSI/ASME B1.20.1—Pipe Threads, General Purpose
user of this standard to establish appropriate safety and health
8
(Inch)
practices and determine the applicability of regulatory limita-
tions prior to use.
3. Classification
2. Referenced Documents 3.1 The anodes shall be of the following classes and types,
as specified (see 4.1.2):
2.1 Order of Precedence—Intheeventofaconflictbetween
3.1.1 Class 1—Cast-in cores:
thetextofthisspecificationandthereferencescitedherein,the
3.1.1.1 Type ZHS—Zinc,hullslab,steelstraps,23and42-lb
text of this specification shall take precedence.
(10 and 19-kg) sizes.
2.2 ASTM Standards
2
3.1.1.2 Type ZHB—Zinc, hull slab, brass straps, 23-lb
A36/A36M Specification for Carbon Structural Steel
3 (10-kg) size.
B21 Specification for Naval Brass Rod, Bar, and Shapes
3.1.1.3 Type ZHC—Zinc, hull slab, core strap, 23 and 42-lb
B103 SpecificationforPhosphorBronzePlate,Sheet,Strip,
3 (10 and 19-kg) sizes.
and Rolled Bar
4
3.1.1.4 Type ZSS—Zinc, submarine slab, steel strap, 12 and
D3951 Practice for Commercial Packaging
24-lb (5 and 11-kg) sizes.
E290 TestMethodforSemi-GuidedBendTestforDuctility
5
3.1.1.5 Type ZTS—Zinc, teardrop shape, steel strap, 5-lb
of Metallic Materials
(2-kg) size.
E536 Test Method for ChemicalAnalysis of Zinc and Zinc
6
3.1.1.6 Type ZEP—Zinc, heat exchanger or fair water disc,
Alloys
7 (pipe core or pipe bushing core):
2.3 Military Standards:
Style A square slab, 9-lb (4-kg) size
Style B circular slab, various sizes
1
This specification is under the jurisdiction ofASTM Committee F25 on Ships
Style C semicircular slab, 23-lb (10-kg) size
and Marine Technology and is the direct responsibility of Subcommittee F25.07 on
3.1.1.7 Type ZBP—Zinc, bar, pipe core, 8-lb (4-kg) size.
General Requirements.
3.1.1.8 Type ZDM—Zinc, segmented disc, machine formed
Current edition approved June 29, 1990. Published August 1990. Originally
interlocking core, various sizes.
published as F1182-88. Last previous edition F1182-88.
2
Annual Book of ASTM Standards, Vol 01.04.
3.1.2 Class 2—Plain, no cores;
3
Annual Book of ASTM Standards, Vol 02.01.
4
Annual Book of ASTM Standards, Vol 15.09.
5
Annual Book of ASTM Standards, Vol 03.01.
6
Annual Book of ASTM Standards, Vol 03.05.
7 8
AvailablefromStandardizationDocuments,OrderDesk,Building4,SectionD, Available from American National Standards Institute, 25 W. 43rd St., 4th
700 Robbins Ave., Philadelphia, PA 19111–5094, Attn: NPODS. Floor, New York, NY 10036.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F 1182
3.1.2.1 Type ZRN—Zinc, rod, no core, extruded, drawn or
B brass straps
S steel straps
rolled.
C core strap
3.1.2.2 Type ZPN—Zinc, plate, no core, rolled.
P pipe core
M machine formed interlocking core
3.2 The letter designations of types of anodes have the
N no core
following meanings:
3.2.1 The first letter designates anode metal:
4. Ordering Information
Z zinc
4.1 Ordersformaterialunderthisspecificationshallinclude
the following information:
3.2.2 The second letter designates the sha
...