ASTM E1338-09
(Guide)Guide for Identification of Metals and Alloys in Computerized Material Property Databases
Guide for Identification of Metals and Alloys in Computerized Material Property Databases
SIGNIFICANCE AND USE
This guide describes the types of information that are indispensable for uniquely identifying a metal or alloy in a computerized database. The purpose is to facilitate standardized storage and retrieval of the information with a computer, and allow meaningful comparison of data from different sources.
Many numbering systems for metals and alloys have been developed which are based on their chemical compositions. Separate systems have also evolved to describe the thermomechanical condition of metals and alloys in order to narrow their description. It is the separation into logical data elements from these complex, historically significant, and overlapping systems of identification that is the challenge in the identification of metals and alloys within computerized databases.
This guide is intended to provide a common starting point for designers and builders of materials property databases. This guide generally identifies the contents of the database in terms of data elements, but does not recommend any particular logical or physical database design. A database builder has considerable flexibility in designing a database schema, and it is intended that this guide support that flexibility.
It is recognized that material property databases will be designed for different levels of material information and for different purposes. For example, a database developed by an industry trade group might only identify typical properties generally representative of those for a particular metal or alloy, and not actual values measured on a specific sample. On the other hand, a business might desire to manage data on specific lots it procures, or even properties of a specific piece or sample from a lot. Consequently, some of the data elements identified in this guide might not be applicable in every database instance.
The extent of material identification implemented in a particular database depends on its specific purpose. A single organization may include substantial detai...
SCOPE
1.1 This guide covers the identification of metals and alloys in computerized material property databases. It establishes essential and desirable data elements that serve to uniquely identify and describe a particular metal or alloy sample as well as properties that identify a given metal or alloy in general.
1.1.1 This guide does not necessarily provide sufficient data elements to describe weld metal, metal matrix composites, or joined metals.
1.1.2 The data element identified herein are not all germane to every metal or alloy group.
1.1.3 Different sets of data elements may also be applied within a given metal or alloy group depending on conditions or applications specific to that metal or alloy group. Further, within a particular metal or alloy group, different sets of data elements may be used to identify specific material conditions.
1.1.4 Table 1 on Recommended Data Elements and Tables 2-17 on values for specific data elements appear at the end of this guide.
1.2 Some of the data elements in this guide may be useful for other purposes. However, this guide does not attempt to document the essential and desirable data element for any purpose except for the identification of metals and alloys in computerized material property databases. Other purposes, such as material production, material procurement, and material processing, each may have different material data reporting requirements distinct from those covered in this guide. A specific example is the contractually required report for a material property testing series. Such a report may not contain all the data elements considered essential for a specific computerized database; conversely, this guide may not contain all the data elements considered essential for a contracted test report.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:E1338 −09
StandardGuide for
Identification of Metals and Alloys in Computerized Material
1
Property Databases
This standard is issued under the fixed designation E1338; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope a specification. While this guide includes a number of test
result data elements, such data elements are included in this
1.1 This guide covers the identification of metals and alloys
guide only for the purposes of material identification.
in computerized material property databases. It establishes
essential and desirable data elements that serve to uniquely 1.4 Reporting of contracted test results, such as certification
identify and describe a particular metal or alloy sample as well test results, shall follow the requirements described in the
as properties that identify a given metal or alloy in general. materialspecification,orasagreeduponbetweenthepurchaser
1.1.1 This guide does not necessarily provide sufficient data and the manufacturer.
elements to describe weld metal, metal matrix composites, or
1.5 This guide contains a limited number of data elements
joined metals.
related to material test results. These data elements are for
1.1.2 The data element identified herein are not all germane
material identification purposes and are not intended to replace
to every metal or alloy group.
the more detailed sets of data elements listed in guides such as
1.1.3 Different sets of data elements may also be applied
Guide E1313 covering data recording formats for mechanical
within a given metal or alloy group depending on conditions or
testing of metals. For material identification purposes, the data
applications specific to that metal or alloy group. Further,
elements in this guide include typical, nominal, or summary
within a particular metal or alloy group, different sets of data
properties normally derived from a population of individual
elements may be used to identify specific material conditions.
specimen tests. If warranted by the scope of a particular
1.1.4 Table 1 on Recommended Data Elements and Tables
database system, the system might provide links between the
2-17 on values for specific data elements appear at the end of
material identification data elements given in this guide, and
this guide.
the individual specimen test results recorded in accordance
1.2 Some of the data elements in this guide may be useful with other guides corresponding to particular test methods.
for other purposes. However, this guide does not attempt to
1.6 Material Classes—See ANSI/AWS A9.1-92 for arc
document the essential and desirable data element for any
welds, Guide E527 for Metal and Alloys in the Unified
purpose except for the identification of metals and alloys in
Numbering System (UNS), Guide E1308 for polymers, Guide
computerized material property databases. Other purposes,
E1309 for composite material, and Guide E1471 for fibers,
such as material production, material procurement, and mate-
fillers, and core materials.
rialprocessing,eachmayhavedifferentmaterialdatareporting
requirements distinct from those covered in this guide. A
2. Referenced Documents
specific example is the contractually required report for a
2
2.1 ASTM Standards:
material property testing series. Such a report may not contain
E8 Test Methods for Tension Testing of Metallic Materials
all the data elements considered essential for a specific
E8M Test Methods forTensionTesting of Metallic Materials
computerized database; conversely, this guide may not contain
3
[Metric] (Withdrawn 2008)
all the data elements considered essential for a contracted test
E527 Practice for Numbering Metals and Alloys in the
report.
Unified Numbering System (UNS)
1.3 Results from material tests conducted as part of the
E616 Terminology Relating to Fracture Testing (Discontin-
3
procurement process are often used to determine adherence to
ued 1996) (Withdrawn 1996)
1
This guide is under the jurisdiction of ASTM Committee B08 onMetallic and
2
Inorganic Coatingsand is the direct responsibility of Subcommittee B08.01 on For referenced ASTM standards, visit the ASTM website, www.astm.org, or
AncillaryActivities. This guide was developed in cooperation with Committee B07 contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
on Light Metals and Alloys. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved Sept. 1, 2009. Published January 2010. Originally the ASTM website.
3
approved in 1990. Last previous edition approved in 2008 as E1338 – 97(2008). The last approved version of thi
...
This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:E1338–97(Reapproved 2008) Designation: E1338 – 09
Standard Guide for
Identification of Metals and Alloys in Computerized Material
1
Property Databases
This standard is issued under the fixed designation E1338; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 Thisguidecoverstheidentificationofmetalsandalloysincomputerizedmaterialpropertydatabases.Itestablishesessential
and desirable data elements that serve to uniquely identify and describe a particular metal or alloy sample as well as properties
that identify a given metal or alloy in general.
1.1.1 Thisguidedoesnotnecessarilyprovidesufficientdataelementstodescribeweldmetal,metalmatrixcomposites,orjoined
metals.
1.1.2 The data element identified herein are not all germane to every metal or alloy group.
1.1.3 Different sets of data elements may also be applied within a given metal or alloy group depending on conditions or
applications specific to that metal or alloy group. Further, within a particular metal or alloy group, different sets of data elements
may be used to identify specific material conditions.
1.1.4 Table 1 on Recommended Data Elements and Tables 2-17 on values for specific data elements appear at the end of this
guide.
1.2 Someofthedataelementsinthisguidemaybeusefulforotherpurposes.However,thisguidedoesnotattempttodocument
the essential and desirable data element for any purpose except for the identification of metals and alloys in computerized material
property databases. Other purposes, such as material production, material procurement, and material processing, each may have
different material data reporting requirements distinct from those covered in this guide. A specific example is the contractually
required report for a material property testing series. Such a report may not contain all the data elements considered essential for
a specific computerized database; conversely, this guide may not contain all the data elements considered essential for a contracted
test report.
1.3 Results from material tests conducted as part of the procurement process are often used to determine adherence to a
specification. While this guide includes a number of test result data elements, such data elements are included in this guide only
for the purposes of material identification.
1.4 Reporting of contracted test results, such as certification test results, shall follow the requirements described in the material
specification, or as agreed upon between the purchaser and the manufacturer.
1.5 This guide contains a limited number of data elements related to material test results. These data elements are for material
identificationpurposesandarenotintendedtoreplacethemoredetailedsetsofdataelementslistedinguidessuchasGuideE1313
covering data recording formats for mechanical testing of metals. For material identification purposes, the data elements in this
guide include typical, nominal, or summary properties normally derived from a population of individual specimen tests. If
warranted by the scope of a particular database system, the system might provide links between the material identification data
elements given in this guide, and the individual specimen test results recorded in accordance with other guides corresponding to
particular test methods.
1.6 Material Classes—See ANSI/AWS A9.1-92 for arc welds, Guide for arc welds, Guide E527 for Metal and Alloys in the
Unified Numbering System (UNS), Guide E1308 for polymers, Guide E1309 for composite material, and Guide E1471 for fibers,
fillers, and core materials. ASTM Committee E49 is developing guides for other material classes. for fibers, fillers, and core
materials.
2. Referenced Documents
2
2.1 ASTM Standards:
1
This guide is under the jurisdiction of ASTM Committee B08 onMetallic and Inorganic Coatings and is the direct responsibility of Subcommittee B08.01 on Ancillary
Activities. This guide was developed in cooperation with Committee B07 on Light Metals and Alloys.
Current edition approved JulySept. 1, 2008.2009. Published October 2008.January 2010. Originally approved in 1990. Last previous edition approved in 20032008 as
E1338 – 97(2003).97(2008). DOI: 10.1520/E1338-97R08.10.1520/E1338-09.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. For An
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.