ASTM D5118/D5118M-05ae1

Standard Practice for Fabrication of Fiberboard Shipping Boxes

SCOPE
1.1 This practice covers the fabrication of new fiberboard boxes, liners and sleeves.
1.2 This practice points out the factors and components that must be controlled in the manufacture of corrugated and solid fiberboard boxes, liners and sleeves.
1.3 This practice does not cover the adequacy of fiberboard containers under all conditions of exposure to atmosphere, handling, shipping and storage.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 30-Sep-2005
• ICS: 55.160 - Cases. Boxes. Crates
• Technical Committee: D10 - Packaging
• Drafting Committee: D10.27 - Fiberboard Shipping Containers, Containerboard and Related Structures and Materials

Relations

• Replaces: ASTM D5118/D5118M-05a - Standard Practice for Fabrication of Fiberboard Shipping Boxes
• Effective Date: 01-Oct-2005
• Replaced By: ASTM D5118/D5118M-12 - Standard Practice for Fabrication of Fiberboard Shipping Boxes
• Effective Date: 01-Apr-2012
• Referred By: ASTM D3951-18 - Standard Practice for Commercial Packaging
• Effective Date: 01-Oct-2005
• Referred By: ASTM D1974/D1974M-22 - Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
• Effective Date: 01-Oct-2005
• Referred By: ASTM B900-16(2022) - Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
• Effective Date: 01-Oct-2005
• Referred By: ASTM D5639/D5639M-20 - Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
• Effective Date: 01-Oct-2005
• Referred By: ASTM F2511-05(2022) - Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
• Effective Date: 01-Oct-2005
• Referred By: ASTM F1245-19 - Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
• Effective Date: 01-Oct-2005
• Referred By: ASTM F1312-19(2023) - Standard Specification for Brick, Insulating, High Temperature, Fire Clay
• Effective Date: 01-Oct-2005
• Referred By: ASTM D4727/D4727M-22 - Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
• Effective Date: 01-Oct-2005
• Referred By: ASTM D2658-18(2023) - Standard Test Method for Determining Dimensions of Fiberboard Boxes
• Effective Date: 01-Oct-2005
• Referred By: ASTM F1142-19 - Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
• Effective Date: 01-Oct-2005

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
´1
Designation:D5118/D5118M–05a
Standard Practice for
1
Fabrication of Fiberboard Shipping Boxes
This standard is issued under the fixed designation D5118/D5118M; the number immediately following the designation indicates the
year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last
reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1
´ NOTE—Section references in subsection 6.2.1.11(2) and 6.4.2.1(1) were editorially corrected in January 2007.
1. Scope D3950 Specification for Strapping, Nonmetallic (and Join-
ing Methods)
1.1 This practice covers the fabrication of new fiberboard
D3951 Practice for Commercial Packaging
boxes, liners and sleeves.
D3953 Specification for Strapping, Flat Steel and Seals
1.2 This practice points out the factors and components that
D4727/D4727M Specification for Corrugated and Solid
must be controlled in the manufacture of corrugated and solid
Fiberboard Sheet Stock (Container Grade) and Cut Shapes
fiberboard boxes, liners and sleeves.
3
2.2 Federal Specifications:
1.3 This practice does not cover the adequacy of fiberboard
CID A-A-59692 Adhesives, Water-Resistant (For Closure
containers under all conditions of exposure to atmosphere,
of Fiberboard Boxes)
handling, shipping and storage.
FED-STD-123 Marking for Shipment (Civil Agencies)
1.4 The values stated in either inch-pound units or SI units
MIL-STD-129 Military Marking for Shipment and Storage
are to be regarded separately as standard. Within the text, the
3
2.3 Code of Federal Regulations:
SI units are shown in brackets. The values stated in each
Title 49
system are not exact equivalents; therefore, each system must
2.4 Other Publications:
be used independently of the other. Combining values from the
4
National Motor Freight Classification
two systems may result in non-conformance with the standard.
5
Uniform Freight Classification
1.5 This standard does not purport to address all of the
6
Federal Food, Drug and Cosmetic Act
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appro-
3. Terminology
priate safety and health practices and determine the applica-
3.1 Definitions of terms relating to packaging are found in
bility of regulatory limitations prior to use.
Terminology D996.
2. Referenced Documents
4. Significance and Use
2
2.1 ASTM Standards:
4.1 Corrugated and solid fiberboard boxes, sleeves and
D685 Practice for Conditioning Paper and Paper Products
liners are used to unitize products into packages of size and
for Testing
shape suitable for manual or mechanical handling and to
D996 Terminology of Packaging and Distribution Environ-
protect the contents against environmental, handling, shipping,
ments
and storage conditions.
D1974 Practice for Methods of Closing, Sealing, and Rein-
4.2 This practice covers some of the basic constructions and
forcing Fiberboard Boxes
styles of commercially available fiberboard packaging used to
D2658 TestMethodforDeterminingInteriorDimensionsof
unitize and protect contents.
Fiberboard Boxes (Box Gage Method)
4.3 Use of Other Specifications—Nothing in this practice
shall be construed to prohibit the use of boxes of special design
1
This practice is under the jurisdiction ofASTM Committee D10 on Packaging
and is the direct responsibility of Subcommittee D10.27 on Paper and Paperboard
3
Products. Available from Standardization Documents, Order Desk, Bldg. 4, Section D,
Current edition approved Oct. 1, 2005. Published November 2005. Originally 700 Robbins Ave., Philadelphia, PA 19111-5094, attn: NPODS.
4
approved in 1990. Last previous edition approved in 2005 as D5118/D5118M – 05. Available from National Motor Freight Classification, Inc., 2200 Mill Road,
DOI: 10.1520/D5118_D5118M-05AE01. Alexandria, VA 22314.
2 5
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Available from National Railroad Freight Committee, 151 Ellis Street, N.E.,
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Suite 260, Atlanta, GA 30335–6021.
6
Standards volume information, refer to the standard’s Document Summary page on Available from the Superintendent of Documents, US Government Printing
the ASTM website. Office, Washington, DC 20402.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
´1
D5118/D5118M–05a
FIG. 1 Fiberboard Box Dimensioning
7
or of fiberboard packages identified by package number in the 5.1.4 SFF/0206 —Special full flap slotted box (Fig. 11).
7
current Uniform Freight Classification and National Motor
5.1.
...