iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F782-01(2012)

(Specification)

Standard Specification for Doors, Furniture, Marine

Standard Specification for Doors, Furniture, Marine

ABSTRACT
This specification covers the construction of doors in marine furniture requiring hinged doors. Doors may be flush, right-hand, left-hand, or panel doors. Sheet metal shall be cold-rolled steel, commercial quality, furniture grade. Aluminum extrusions shall be Type 6063-T6 aluminum alloy. Aluminum sheet shall be Type 5052-H32 aluminum alloy. Metal components shall be joined by welding or gluing with a structural adhesive. Doors shall be capable of supporting a specified vertical load, applied at the lock edge of door, with door in any position. Doors shall be subject to tilt test.
SCOPE
1.1 This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications.  
1.2 This specification applies to all furniture doors for marine furniture, in items requiring hinged doors.  
1.3 Values stated in inch-pound units are to be regarded as the standard. The metric equivalents, given in parentheses, are for information only.

General Information

Status
Historical
Publication Date
31-May-2012
ICS
47.020.80 - Accommodation spaces
Technical Committee
F25 - Ships and Marine Technology
Drafting Committee
F25.03 - Outfitting and Deck Machinery
Current Stage
Ref Project

Relations

Replaces
ASTM F782-01(2007) - Standard Specification for Doors, Furniture, Marine
Effective Date
01-Jun-2012
Replaced By
ASTM F782-19 - Standard Specification for Doors, Furniture, Marine
Effective Date
01-Dec-2019
Referred By
ASTM F823-22 - Standard Specification for Desk, Log, Marine, Steel, with Cabinet
Effective Date
01-Jun-2012

Buy Standard

ASTM F782-01(2012) - Standard Specification for Doors, Furniture, MarineASTM F782-01(2012) - Standard Specification for Doors, Furniture, Marine
PreviousNext
Technical specification
ASTM F782-01(2012) - Standard Specification for Doors, Furniture, Marine
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F782 −01 (Reapproved 2012) An American National Standard
Standard Specification for
1
Doors, Furniture, Marine
ThisstandardisissuedunderthefixeddesignationF782;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
3
1. Scope 2.2 American Institute of Steel Construction Manual:
AISC Wire and Sheet Metal Gages—Equivalent Thickness
1.1 This specification covers the construction of furniture
in Decimals of an Inch, U.S. Standard Gage (USSG) for
doors for use where invoked by other marine furniture speci-
Uncoated Hot and Cold-Rolled Sheets
fications.
4
2.3 Federal Specifications:
1.2 This specification applies to all furniture doors for
DD-G-1403 Glass, Plate (Float), Sheet Figured, and Span-
marine furniture, in items requiring hinged doors.
drel (Heat Strengthened and Fully Tempered)
LP-391 Plastic Sheets, Rods and Tubing, Rigid Cast, Meth-
1.3 Values stated in inch-pound units are to be regarded as
the standard. The metric equivalents, given in parentheses, are acrylate (Multiapplication)
QQ-C-320 Chromium Plating (Electrodeposited)
for information only.
QQ-Z-325 Zinc Coating, Electrodeposited
5
2. Referenced Documents
2.4 American National Standard Institute Standards:
2
ANSI Z97.1-1975 Safety Performance Specifications and
2.1 ASTM Standards:
A240/A240M Specification for Chromium and Chromium- Methods of Test for Safety Glazing Material Used in
Buildings
Nickel Stainless Steel Plate, Sheet, and Strip for Pressure
Vessels and for General Applications
3. Terminology
A1008/A1008M Specification for Steel, Sheet, Cold-Rolled,
Carbon, Structural, High-Strength Low-Alloy, High- 3.1 Definitions of Terms Specific to This Standard:
Strength Low-Alloy with Improved Formability, Solution 3.1.1 flush doors—metal doors with a smooth surface on the
Hardened, and Bake Hardenable exterior face.
A582/A582M Specification for Free-Machining Stainless
3.1.2 hinged door—door equipped with hinges that permit it
Steel Bars
to swing about the vertical hinge axis, either right hand or left
B209 Specification for Aluminum and Aluminum-Alloy
hand.
Sheet and Plate
3.1.2.1 right-hand door—door with hinges on the right side
B221 Specification forAluminum andAluminum-Alloy Ex-
when viewed from the exterior of the furniture item containing
truded Bars, Rods, Wire, Profiles, and Tubes
the door.
C1036 Specification for Flat Glass
3.1.2.2 left-hand door—door with hinges on the left side
D907 Terminology of Adhesives
when viewed from the exterior of the furniture item containing
F2119 Test Method for Evaluation of MR Image Artifacts
the door.
from Passive Implants
3.1.3 panel doors—doors with metal stiles and rails that
supportapanelinsertoftransparentsafetyglazingorexpanded
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships
aluminum.
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
Outfitting and Deck Machinery.
Current edition approved June 1, 2012. Published October 2012. Originally
3
approvedin1982.Lastpreviouseditionapprovedin2007asF782 - 01(2007).DOI: Available from the American Institute of Steel Construction, 400 N. Michigan
10.1520/F0782-01R12. Ave., Chicago, IL 60611.
2 4
For referenced ASTM standards, visit the ASTM website, www.astm.org, or AvailablefromStandardizationDocumentsOrderDesk,Bldg.4SectionD,700
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.
5
Standards volume information, refer to the standard’s Document Summary page on Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
the ASTM website. 4th Floor, New York, NY 10036, http://www.ansi.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F782−01 (2012)
Table of Dimensions
Dimensions
Designation
in. mm
Door thickness A 1 max 25.4 max
Width of stile or height of rail B 3 max 76.2 max
NOTE 1—Panels of Type I (flush) doors shall be cold-rolled sheet steel, commercial quality, furniture grade in accordance with Specification
A1008/A1008M, 18 USSG (0.0478 in. or 1.21 mm). Stiffeners shall be applied to front and back as required to prevent buckling or oil-canning.
NOTE 2—At the option of the furniture manufacturer the stiles and rails for Type II (panel) door, may be either 18 USSG (0.0478 in. or 1.21 mm)
cold-rolled steel, commercial quality, furniture grade in accordance with Specification A1008/A1008M or Type 6063-T6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F3648-23(Guide)
Standard Guide for Maintenance of Marine Sanitation Devices (MSDs) and the Effects of Cleaning Agents on MSD Operations

SCOPE
1.1 The guide provides information and clarity to support the health and maintenance of Marine Sanitation Devices (MSDs) on maritime vessels and platforms to promote effective operations and performance throughout the lifecycle. This includes identification of chemicals and their derivatives that can be detrimental to proper MSD operations. This guide will promote better understanding of the impacts of certain chemicals on the health and operations of MSD systems, plus provide guidance to inform operators of best practices and procedures for effective operations and maintenance. This guide is designed to assist both operators and MSD Original Equipment Manufacturers (OEMs) in collaboratively working to ensure effective operations and maintenance, and to reduce performance degradations that result from the introduction of harmful chemicals. The primary application of this guide is to Type II MSDs (described in Section 4), installed on larger ships and employing biological treatment of sewage and gray water.
Note 1: This guide does not constitute regulations or ship classification society rules, which should be consulted where applicable.  
1.2 Manufacturers preparing new product specifications or revising existing ones should follow the practices and procedures outlined herein, and be guided by the latest specifications covering similar commodities. Similarly, vessel owner/operators should consult this guide regarding in-service operations and maintenance.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    7 pages
    English language
    sale 15% off
ASTM
ASTM F3257-17(2022)(Guide)
Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations

SCOPE
1.1 Objectives—Guidelines are provided for the design, construction, and operation of an Accommodation Service Vessel (ASV) intended to provide accommodation services to an offshore installation. The goal of these guidelines is to focus attention on the safety aspects of design. These guidelines are recommended for each vessel providing accommodation service to an offshore installation for more than 36 persons.  
1.2 Relationship with Regulatory and Classification Standards—This guide covers information for designing, constructing and operating ASVs and includes considerations not generally addressed in classification or statutory requirements intended for traditional cargo or passenger ships. While portions of this guide may refer to standards, it is not intended to supersede any classification or statutory requirements.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    5 pages
    English language
    sale 15% off
ASTM
ASTM F825-22(Specification)
Standard Specification for Drawers, Furniture, Marine, Steel

ABSTRACT
This specification covers the construction of steel furniture drawers for use where invoked by other marine furniture specifications. Joining shall be adequate to prevent racking during handling. Metal components of drawers, shall be joined by welding or gluing with a structural adhesive. All drawers shall incorporate a latch or other positive means to prevent drawers opening in heavy seas. All drawers shall be furnished with a means for pulling drawers open. Each drawer shall have a pair of drawer tracks with one drawer track on each of its sides. Load test and tilt test shall be performed to conform with the specified requirements. Drawers shall be made to a size that suits the furniture item that supports them.
SCOPE
1.1 This specification covers the construction of steel furniture drawers for use where invoked by other marine furniture specifications.  
1.2 This specification applies to all furniture drawers, except items requiring progressive drawers.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F822-22(Specification)
Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

ABSTRACT
This specification covers the design, dimensional, and performance requirements for the manufacture of marine chests of drawers (chiffoniers) of steel construction to be used in staterooms and other spaces. All material, workmanship, and finish shall be of specified quality in keeping with the best commercial marine practice so as to produce each item suitable for its intended use.
SCOPE
1.1 This specification covers the construction of marine chests of drawers (chiffoniers) of steel construction to be used in staterooms and other spaces.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F826-22(Specification)
Standard Specification for Tops, Furniture, Marine, Steel

ABSTRACT
This specification covers the construction of steel furniture tops for use where invoked by other marine furniture specifications. Tops shall be of the following types: type I - top on which the edge binder is flush with the top and the substrate material is steel; type II - top on which the edge binder projects above the upper surface of the top to act as a lee rail and the substrate material is steel; type III - top on which a lee rail is applied to the upper surface of the finished top, the top has a self edge securely bonded to the finished top, and the substrate material is a particle or mineral board core; and type IV - top is an insert panel and the edge binder is an integral part of the supporting furniture unit. Tops shall be of the following grades: grade 1 - substrate material and edge reinforcements for types I, II, and IV, and grade 2 - substrate material is a particle or mineral board core with a minimum density of 45 lb/ft3.
SCOPE
1.1 This specification covers the construction of steel furniture tops for use where invoked by other marine furniture specifications.  
1.2 This specification applies to tops for furniture case goods only such as chests of drawers, log desks with cabinets, and so forth.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM F1000-21(Practice)
Standard Practice for Piping System Drawing Symbols

SIGNIFICANCE AND USE
2.1 Fig. 1 provides symbols for strainers, separators, and filters.  
2.2 Fig. 2 provides symbols for valves. Valves are categorized under the following headings: globe, angle, check, ball, butterfly, gate, relief, manifolds, control, noise control, and miscellaneous.  
2.3 Fig. 3 provides symbols for valve appendages such as actuators and locking devices. Symbols shown on Fig. 3 are to be combined with the appropriate symbol from Fig. 2.  
2.4 Fig. 4 provides symbols for piping system–related instrumentation. These symbols are categorized under the following headings: pressure, temperature, flow, level, switches, alarms, and miscellaneous.  
2.5 Fig. 5 provides symbols for fans, pumps, and turbines.  
2.6 Fig. 6 provides symbols for plumbing components.  
2.7 Fig. 7 provides symbols for pipe and pipe fittings.  
2.8 Fig. 8 provides symbols for noise control components and designations. These symbols are generally used for submarine design.  
2.9 Fig. 9 provides symbols for transitions. These symbols identify transitions such as pipe material or pipe schedule changes.  
2.10 Fig. 10 provides symbols for miscellaneous components. These are components which could not be classified under the above categories. Examples include heat exchangers, flasks, and sea chests.  
2.11 Fig. 11 provides symbols for grooved piping.
SCOPE
1.1 This practice establishes piping system drawing symbols for marine use.  
1.2 This set of standard symbols is intended for use on piping system diagrammatics and arrangements for ships.  
1.3 Where graphical symbols are required for an item or equipment not covered by this practice, the form and character of the symbol will be left to the discretion of the activity concerned, provided that the symbol used does not duplicate any of those contained herein, and is clearly understandable, subject to one interpretation only, or explained by a suitable note on the drawing when necessary.  
1.4 Since symbolic representation does not usually involve exact or scale layout or the actual run or leads of piping, the same symbol may be used for all projections of the system (plan, elevations, and sections).  
1.5 Symbols for fluid power, heating, ventilation, and air conditioning (HVAC), and Navy damage control diagrams are not included in this practice.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    22 pages
    English language
    sale 15% off
ASTM
ASTM F782-19(Specification)
Standard Specification for Doors, Furniture, Marine

ABSTRACT
This specification covers the construction of doors in marine furniture requiring hinged doors. Doors may be flush, right-hand, left-hand, or panel doors. Sheet metal shall be cold-rolled steel, commercial quality, furniture grade. Aluminum extrusions shall be Type 6063-T6 aluminum alloy. Aluminum sheet shall be Type 5052-H32 aluminum alloy. Metal components shall be joined by welding or gluing with a structural adhesive. Doors shall be capable of supporting a specified vertical load, applied at the lock edge of door, with door in any position. Doors shall be subject to tilt test.
SCOPE
1.1 This specification covers the construction of furniture doors for use where invoked by other marine furniture specifications.  
1.2 This specification applies to all furniture doors for marine furniture, in items requiring hinged doors.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1245-19(Specification)
Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

ABSTRACT
This specification covers single- and double compression and self-closing faucets for shipboard plumbing installations. Faucets may be classified into nine types: Type I is the standard (bibb) with three classes namely Class A (compression, plain end), Class B (compression, hose end), and Class C (self-closing); Type II is a lavatory, self-closing, low spout faucet with two classes which are Class A (fast-closing) and Class B (slow-closing, depression type); Type III is a folding lavatory,self-closing faucet; Type IV is an elbow operated faucet, Type V is a faucet with lavatory, combination water supply and drain fixture; Type VI is a faucet with combination supply fixture swing spout for use on galley sinks; Type VII is a faucet with single supply fixture swing spout for use with steam kettles and urns and this type has two classes namely Class A which has spout for overhead supply and Class B which has spout for riser supply; Type VIII is a faucet with supply fixture for pressed metal and shock mounted china lavatories; and Type IX which is a faucet with lavatory and combination of water supply and drain fixtures. Faucet bodies shall be made of bronze and handles shall be of commercial grade cast or forged brass or bronze. Bonnets, handwheels, and nuts shall be of commercial quality brass or bronze; machine screws shall be made of commercial brass. Seat washers shall be of a rubber or fiber material and suitable for a certain water temperature range without deterioration of material. Springs for self-closing faucets shall be of corrosionresisting steel, phosphor bronze, or nickel copper. All samples shall be subjected to a hydrostatic test.
SCOPE
1.1 This specification covers single- and double-compression and self-closing faucets for shipboard plumbing installations.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The following precautionary caveat pertains only to the test methods portion, Section 10, of this standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM F1085-19(Specification)
Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

ABSTRACT
This specification provides the requirements for mattresses and box springs that are for use in berths for officers, crew, and passengers in marine vessels. This shall be considered a minimum standard. Tearing strength, breaking strength, elongation, and flame resistance of the material shall be tested to meet the requirements prescribed.
SCOPE
1.1 This specification provides the requirements for mattresses and box springs that are for use in berths for officers, crew, and passengers in marine vessels. This shall be considered a minimum standard.  
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.3 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions.  
1.4 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    10 pages
    English language
    sale 15% off
  • Technical specification
    10 pages
    English language
    sale 15% off
ASTM
ASTM F3648-23(Guide)
Standard Guide for Maintenance of Marine Sanitation Devices (MSDs) and the Effects of Cleaning Agents on MSD Operations

SCOPE
1.1 The guide provides information and clarity to support the health and maintenance of Marine Sanitation Devices (MSDs) on maritime vessels and platforms to promote effective operations and performance throughout the lifecycle. This includes identification of chemicals and their derivatives that can be detrimental to proper MSD operations. This guide will promote better understanding of the impacts of certain chemicals on the health and operations of MSD systems, plus provide guidance to inform operators of best practices and procedures for effective operations and maintenance. This guide is designed to assist both operators and MSD Original Equipment Manufacturers (OEMs) in collaboratively working to ensure effective operations and maintenance, and to reduce performance degradations that result from the introduction of harmful chemicals. The primary application of this guide is to Type II MSDs (described in Section 4), installed on larger ships and employing biological treatment of sewage and gray water.
Note 1: This guide does not constitute regulations or ship classification society rules, which should be consulted where applicable.  
1.2 Manufacturers preparing new product specifications or revising existing ones should follow the practices and procedures outlined herein, and be guided by the latest specifications covering similar commodities. Similarly, vessel owner/operators should consult this guide regarding in-service operations and maintenance.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    7 pages
    English language
    sale 15% off