iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D3758-95(2010)

(Practice)

Standard Practice for Evaluation of Spray-Buff Products on Test Floors

Standard Practice for Evaluation of Spray-Buff Products on Test Floors

SIGNIFICANCE AND USE
Spray buff products are utilized for the maintenance of polished floors. This practice is for the evaluation of a spray buff product against a reference product. The procedure is a floor test utilizing a rotary-disc floor machine. This practice as currently written may or may not be applicable for machines in excess of 350 R.P.M.
SCOPE
1.1 This practice covers the comparison of the performance of spray-buff products on test floors against a reference material. Spray-buff products are to be used to maintain base floor-polish films. This technique is intended to be used on water-emulsion floor polishes with a floor machine not exceeding 95 lb (43 kg) in weight and with a rate of rotation of 350 rpm or less.
1.2 Gloss, heel marking, soil resistance, and slip resistance of the spray-buffed test panels are rated in comparison to test panels similarly maintained with a reference spray-buff product.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
30-Apr-2010
ICS
71.100.99 - Other products of the chemical industry
Technical Committee
D21 - Polishes
Drafting Committee
D21.04 - Performance Tests
Current Stage
Ref Project

Relations

Replaces
ASTM D3758-95(2003) - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
Effective Date
01-May-2010
Replaced By
ASTM D3758-95(2017) - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
Effective Date
01-Sep-2017

Buy Standard

ASTM D3758-95(2010) - Standard Practice for Evaluation of Spray-Buff Products on Test FloorsASTM D3758-95(2010) - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
PreviousNext
Standard
ASTM D3758-95(2010) - Standard Practice for Evaluation of Spray-Buff Products on Test Floors
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D3758 − 95 (Reapproved 2010)
Standard Practice for
1
Evaluation of Spray-Buff Products on Test Floors
This standard is issued under the fixed designation D3758; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3. Terminology
1.1 This practice covers the comparison of the performance 3.1 Definitions:
of spray-buff products on test floors against a reference
3.1.1 water emulsion floor polish—an emulsion-based pol-
material. Spray-buff products are to be used to maintain base
ish in which water is the continuous or external phase.
floor-polish films. This technique is intended to be used on
3.1.2 wax emulsion—a water emulsion polish containing a
water-emulsionfloorpolisheswithafloormachinenotexceed-
predominance of natural or synthetic waxes, or both.
ing 95 lb (43 kg) in weight and with a rate of rotation of 350
rpm or less.
4. Significance and Use
1.2 Gloss, heel marking, soil resistance, and slip resistance
4.1 Spray buff products are utilized for the maintenance of
of the spray-buffed test panels are rated in comparison to test
polished floors. This practice is for the evaluation of a spray
panels similarly maintained with a reference spray-buff prod-
buff product against a reference product. The procedure is a
uct.
floor test utilizing a rotary-disc floor machine. This practice as
1.3 The values stated in inch-pound units are to be regarded
currentlywrittenmayormaynotbeapplicableformachinesin
as standard. The values given in parentheses are mathematical
excess of 350 R.P.M.
conversions to SI units that are provided for information only
and are not considered standard.
5. Apparatus
1.4 This standard does not purport to address all of the
5.1 Floor Machine of the single-disk type, fitted with a pad
safety concerns, if any, associated with its use. It is the
driver and a spray-buffing floor maintenance pad.
responsibility of the user of this standard to establish appro-
priate safety and health practices and determine the applica-
5.2 Glossmeter—The instrument and the reference stan-
bility of regulatory limitations prior to use.
dards shall conform to the requirements prescribed in Test
Method D523, using an angle of reflection of 60°.
2. Referenced Documents
2
2.1 ASTM Standards: 6. Description of Test Area
D523Test Method for Specular Gloss
6.1 The preferred area is a corridor in normal traffic service
D1455Test Method for 60° Specular Gloss of Emulsion
exposed to nearly uniform traffic over the test area.
Floor Polish
6.2 The preferred substrate is vinyl tile.
2.2 Chemical Specialties Manufacturers Association Test
Methods:
6.3 Divide the area into test sections at least 4 ft (1.2 m) in
245-70Comparative Determination Slip Resistance of Floor
length and the full width of the corridor. Use one section for
3
Polishes
each test material in addition to the control section.
7. Preparation of Test Area
1
This practice is under the jurisdiction of ASTM Committee D21 on Polishes
and is the direct responsibility of Subcommittee D21.04 on Performance Tests.
7.1 Completelystripthetestareaofdirtandoldfloorpolish.
Current edition approved May 1, 2010. Published May 2010. Originally
Thoroughly rinse and dry before applying the base polishes.
approved in 1979. Last previous edition approved in 2003 as D3758–95(2003).
DOI: 10.1520/D3758-95R10.
7.2 Coat two test sections of the corridor with base polish.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Maintain one test section with the test spray-buff product and
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on the other section (control) with a reference spray-buff product.
the ASTM website.
7.2.1 Apply the base polish to the test section, using any
3
Available from Chemical Specialties Manufacturers Assn., Inc., 1913 Eye
suitable and controlled procedure in accordance with the
Street, N. W., Washington, DC 20006. Test Methods and General Information,
Waxes, Polishes, and Floor Finishes Div. manufacturer’s recommendations.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D3758 − 95 (2010)
7.2.2 Wait 1 h after the first coat has dried to touch before 8.3 Evaluate the test sections for visual gloss after spray
the application of a second coat.Wait 1 h after the second coat buffing, heel marking before and after spray buffing, soiling
has dried to touch before the application of a third coat of before spray b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D3210-95(2023)(Test Method)
Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes

SIGNIFICANCE AND USE
5.1 Whiteness index obtained from reflectance measurements on exaggerated dried polish films on filter paper can be used as a measurement of the color of such films.  
5.2 Whiteness index may be useful in predicting the potential discoloring effect of polish films on flooring substrates.  
5.3 Whiteness index should be useful in specifications when color comparisons are made with a standard sample polish.
SCOPE
1.1 This test method covers comparing colors of films (or solids) deposited from the emulsified particles in water emulsion floor polishes. It is based upon luminous reflectance measurements made with tristimulus colorimeters such as the Hunter Color Difference Meter.2  
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3209-93(2023)(Test Method)
Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

SIGNIFICANCE AND USE
3.1 This test method is used to determine the effect of freezing on floor polishes. It may be used to predict the stability of a floor polish when exposed to freezing.
SCOPE
1.1 This test method covers the determination of the stability of polymer emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1455-17(2023)(Test Method)
Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

SIGNIFICANCE AND USE
4.1 This test method may be used to evaluate the difference in gloss of dried films of emulsion floor polishes when the light reflected at a 60° angle is measured. Extremely high- or low-gloss polishes may not be differentiated at a 60° angle. A20° angle measured in accordance with Test Method D523 may give better definition of gloss.
SCOPE
1.1 This test method covers the determination of the 60° specular gloss of films of emulsion floor polish after application to a substrate.  
Note 1: Specular gloss is one of several related appearance attributes that produce the sensation of glossiness. For this reason, specular gloss measurements may not always correlate well with visual rankings of glossiness.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1792-17(2023)(Test Method)
Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes

SIGNIFICANCE AND USE
4.1 This test method is used to predict removability of floor polish after a treatment period that simulates aging in the field. It allows for uniform mechanical and detergent action leaving the only variable the actual removability of the polish.
SCOPE
1.1 This test method covers the determination of the relative ease of removal of dried films of water-emulsion floor polishes from common flooring substrates under accelerated conditions, which correspond to extended service aging.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D4002-81(2023)(Practice)
Standard Practice for Evaluation of Buffable Shoe Polish

SIGNIFICANCE AND USE
3.1 This practice is intended to define the properties to be tested, the apparatus to use, and the comparisons of product performance. It is recognized that considerable discretion exists among formulators and marketers of shoe polish on what properties or performance characteristics are best for their products. This practice will be flexible to honor this fact within the confines of the shoe polish definition in 2.1.
SCOPE
1.1 This practice covers the definition of properties to test and the apparatus to use, in evaluating the performance of buffable shoe polishes.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D5678-17(2023)(Test Method)
Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

SIGNIFICANCE AND USE
3.1 This test method is used to determine the effect of freezing on wax emulsion floor polishes. It may be used to predict the stability of a floor polish in transit or when exposed to freezing, and whether or not the polish is damaged by freezing.
SCOPE
1.1 This test method covers the determination of the stability of wax emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured.  
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3954-15(2022)(Test Method)
Standard Test Method for Dropping Point of Waxes

SIGNIFICANCE AND USE
4.1 Waxes do not go through a sharp solid-liquid phase change when heated and therefore do not have a true melting point. As the temperature rises, waxes gradually soften or become less viscous. For this reason, the determination of the softening point must be made by an arbitrary but closely defined method if test values are to be reproducible.  
4.2 This test is useful in determining the consistency of waxes, and as one element in establishing the uniformity of shipments or source of supply.  
4.3 This test method has been found suitable for all types of waxes including paraffin, microcrystalline polyethylene, and natural waxes.
SCOPE
1.1 This test method covers the determination of the ASTM dropping point for waxes.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2834-95(2022)(Test Method)
Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

SIGNIFICANCE AND USE
2.1 Nonvolatile matter determination is useful as a quality control test, when used in conjunction with other tests, to assure specification compliance.
SCOPE
1.1 This test method covers the determination of nonvolatile matter (total solids) in a water-emulsion, organic solvent-based liquid and paste floor polishes, and polymer-emulsion-type floor polishes.  
1.2 This test method recognizes that the products may contain material that will slowly volatilize or change chemically with a resulting change in weight of the nonvolatile matter. Therefore, since drying to constant weight is impractical, specific drying times have been selected.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1791-93(2022)(Test Method)
Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

SIGNIFICANCE AND USE
3.1 This test method is not absolute but does give an indication of the useful shelf-life of a liquid water-emulsion floor polish. Will indicate whether a polish will gel or remain a usable liquid over the desired storage life of the product. It should be noted that polishes of different composition types will vary in useful storage life under identical storage conditions.
SCOPE
1.1 This test method covers the storage stability of liquid water-emulsion floor polishes.  
1.2 Storage for 30 days at 52 °C (125 °F), while not a guarantee of one year stability at 21 °C (70 °F), is believed to be a more reliable indicator of storage stability than similar tests of shorter duration.  
Note 1: The 60° specular gloss on black glass determined by Test Method D1455, may be used to confirm this observation. A substantial difference in gloss between aged and unaged samples is an indication of instability. A shelf stability of one year can be reasonably expected of the material in question if duplicate samples remain unchanged for 30 days at 52 °C ± 1.1 °C (125 °F ± 2 °F). If one or both duplicates show more than slight viscosity increases or slight creaming, other evidence of stability must be sought.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3564-22(Practice)
Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring

SIGNIFICANCE AND USE
2.1 Vinyl composition tile or flooring consists of vinyl resins (suitably plasticized and stabilized) fortified with composition fibers, mineral fillers, and prime pigments. In some cases, all or part of the wearing surfaces may consist of unfilled vinyl resin that is clear or translucent. Metallic accents (chips, pigment, etc.) are frequently used to form the overall design. In general, the overall binder content is lower than that of homogeneous vinyl tile. For the purpose of this practice, vinyl composition also includes vinyl asbestos tile.
SCOPE
1.1 This practice covers the application of floor polishes to maintain vinyl composition tile or flooring. Floor polishes are applied to vinyl composition tile floors for protection and beautification of the floor surface. Cleaning, polish application, removal, and maintenance procedures are important functions in this process.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off