ASTM F395-10
(Terminology)Standard Terminology Relating to Vacuum Cleaners
Standard Terminology Relating to Vacuum Cleaners
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F395 − 10 An American National Standard
Standard Terminology Relating to
1
Vacuum Cleaners
ThisstandardisissuedunderthefixeddesignationF395;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
agitator, n—a device that is in contact with the surface to be detachable nozzles, attachments, and wands for both floor
cleaned and assists in dirt removal by mechanical action, and above-the-floor cleaning.
rotary and otherwise.
cleaning ability, dry, n—the potential of a vacuum cleaner to
air power (AP, W), n—(1) in a vacuum cleaner, the net time
remove dirt from a surface (sometimes referred to in the
rate of work performed by an air stream while expending
industry as cleanability, dry).
energy to produce an airflow by a vacuum cleaner under
cleaning effectiveness, dry, n—the ratio of the quantity of dirt
specified air resistance conditions. (2) a measure of the
removed to the quantity of dirt distributed on a test area.
ability of the air stream to do work. Air power is expressed
in terms of air watts.
cleaning tool, n—a customer-installed device for a vacuum
cleaner that is applied to the surface to be cleaned and is
canister vacuum cleaner, n—a portable floor-supported
attached to the hose or the nozzle, for specialty cleaning
vacuum cleaner, having a nozzle separated from the cleaner
functions.
housing by a hose and designed for normal-duty cleaning of
household dirt. In use, only the nozzle is guided over the
combination vacuum cleaner, n—a canister vacuum cleaner
surface area to be cleaned. The cleaner may have detachable
having a motorized nozzle separated from the cleaner
nozzles, attachments, and wands for both floor and above-
housing but connected to it by means of a hose or hose and
the-floor cleaning. The nozzle may employ a driven agitator
wand.
to assist in cleaning.
commercial vacuum cleaner, n—a vacuum cleaner suitable
carpet lay, n—orientation of the pile of a carpet (or fabric)
for the heavy-duty and sometimes continuous cleaning tasks
relativetothebacking; the tendency of a carpet’s piletolean
encountered in establishments such as hotels, motels, office
uniformly in a specific direction relative to the backing.
buildings, churches, clubs, etc.
car vacuum cleaner, n—a relatively small, lightweight, por-
corrected air flow, n—the volume of air movement per unit of
table cleaner that is designed for operation from a d-c power
time under standard atmospheric conditions. The flow is
source, generally a 12-V automotive battery (see also hand-
expressed in cubic feet per minute or litres per second.
held vacuum cleaner).
dirt receptacle first vacuum cleaner system, n—a vacuum
central vacuum cleaning system, n—a cleaning system con-
cleaner construction in which the dirt laden air is passed
sisting of a stationary vacuum producer and dust collector
through a dirt receptacle (bag type filter, bagless filter, or
that incorporates the use of a tubing system internal to a
other type of dirt separator). The separated air is then pulled
building structure and a flexible hose, or both, for conveying
throughthefan(bypass)orfanandmotor(flowthrough)and
dust from the area being cleaned to the dust collector. The
expelled from the cleaner. This type of construction is
system is designed for all-purpose cleaning including vari-
sometimes referred to as clean air or indirect system.
ous types of larger debris and may be designed for liquid
pickup. The system is used by inserting one end of a hose equivalent orifice, n—the diameter of the sharp-edged circular
into a wall vacuum inlet valve and attaching a cleaning
opening in the plate mounted in anASTM Plenum Chamber
nozzle to the other end. In use, the nozzle is guided over the (see Specification F431, for Air Performance Measurement
2
surface area to be cleaned. The system may contain a driven
Plenum Chamber for Vacuum Cleaners ), the opening hav-
agitator to assist in dirt removal and it normally has ing a resistance to air flow equivalent to the resistance
1
ThisterminologyisunderthejurisdictionofASTMCommitteeF11onVacuum
2
Cleaners and is the direct responsibility of Subcommittee F11.91 on Terminology. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved April 1, 2010. Published April 2010. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 1974. Last previous edition approved in 2007 as F395 – 03 (2007). Standards volume information, refer to the standard’s Document Summary page on
DOI: 10.1520/F0395-10. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:F395–03 (Reapproved 2007) Designation: F395 – 10
Standard Terminology Relating to
1
Vacuum Cleaners
ThisstandardisissuedunderthefixeddesignationF395;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
agitator, n—a device that is in contact with the surface to be cleaned and assists in dirt removal by mechanical action, rotary and
otherwise.
air power (AP, W), n—(1) in a vacuum cleaner, the net time rate of work performed by an air stream while expending energy
to produce an airflow by a vacuum cleaner under specified air resistance conditions. (2) a measure of the ability of the air stream
to do work. Air power is expressed in terms of air watts.
canister vacuum cleaner, n—a portable floor-supported vacuum cleaner, having a nozzle separated from the cleaner housing by
a hose and designed for normal-duty cleaning of household dirt. In use, only the nozzle is guided over the surface area to be
cleaned. The cleaner may have detachable nozzles, attachments, and wands for both floor and above-the-floor cleaning. The
nozzle may employ a driven agitator to assist in cleaning.
carpet lay, n—orientationofthepileofacarpet(orfabric)relativetothebacking;thetendencyofacarpet’spiletoleanuniformly
in a specific direction relative to the backing.
car vacuum cleaner, n—a relatively small, lightweight, portable cleaner that is designed for operation from a d-c power source,
generally a 12-V automotive battery (see also hand-held vacuum cleaner).
central vacuum cleaning system, n—a cleaning system consisting of a stationary vacuum producer and dust collector that
incorporates the use of a tubing system internal to a building structure and a flexible hose, or both, for conveying dust from the
area being cleaned to the dust collector. The system is designed for all-purpose cleaning including various types of larger debris
and may be designed for liquid pickup. The system is used by inserting one end of a hose into a wall vacuum inlet valve and
attaching a cleaning nozzle to the other end. In use, the nozzle is guided over the surface area to be cleaned. The system may
contain a driven agitator to assist in dirt removal and it normally has detachable nozzles, attachments, and wands for both floor
and above-the-floor cleaning.
cleaning ability, dry, n—the potential of a vacuum cleaner to remove dirt from a surface (sometimes referred to in the industry
as cleanability, dry).
cleaning effectiveness, dry, n—the ratio of the quantity of dirt removed to the quantity of dirt distributed on a test area.
cleaning tool, n—a customer-installed device for a vacuum cleaner that is applied to the surface to be cleaned and is attached to
the hose or the nozzle, for specialty cleaning functions.
combination vacuum cleaner, n—a canister vacuum cleaner having a motorized nozzle separated from the cleaner housing but
connected to it by means of a hose or hose and wand.
commercial vacuum cleaner, n—a vacuum cleaner suitable for the heavy-duty and sometimes continuous cleaning tasks
encountered in establishments such as hotels, motels, office buildings, churches, clubs, etc.
corrected air flow, n—the volume of air movement per unit of time under standard atmospheric conditions.The flow is expressed
in cubic feet per minute or litres per second.
dirt receptacle first vacuum cleaner system, n—a vacuum cleaner construction in which the dirt laden air is passed through a
dirt receptacle (bag type filter, bagless filter, or other type of dirt separator). The separated air is then pulled through the fan
(bypass) or fan and motor (flow through) and expelled from the cleaner. This type of construction is sometimes referred to as
clean air or indirect system.
equivalent orifice, n—the diameter of the sharp-edged circular opening in the plate mounted in anASTM Plenum Chamber (see
2
Specification F431, forAir Performance Measurement Plenum Chamber forVacuum Cleaners ), the opening having a resistance
to air flow equivalent to the resistance caused by a specific usage of the vacuum cleaner. The equivalent orifice diameter is
expressed in inches or millimetres.
1
This terminology is under the jurisdiction of ASTM Committee F11 on Vacuum Cleaners and is the direct responsibility of Subcommittee F11.91 on Terminology.
Current edition approved Sept. 1, 2007. Published Septembe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.