ASTM F934-96(2013)
(Specification)Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
ABSTRACT
This specification covers standard colors for coated chain link fence materials such as chain link fence fabric, tension wire, posts, rails, gate frames, and fittings. Standard polymer colors include dark green, olive green, brown, and black.
SCOPE
1.1 This specification covers standard colors for coated chain link fence materials such as chain link fence fabric, tension wire, posts, rails, gate frames, and fittings.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F934 −96 (Reapproved 2013)
Standard Specification for
Standard Colors for Polymer-Coated Chain Link Fence
Materials
ThisstandardisissuedunderthefixeddesignationF934;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3. Color
1.1 This specification covers standard colors for coated
3.1 Unless otherwise stipulated by the purchaser, determine
chain link fence materials such as chain link fence fabric,
the color in accordance with the standard contained in Table 1.
tension wire, posts, rails, gate frames, and fittings.
3.2 Determine compliance with this requirement by com-
parison of specimens of the coated materials to standard flat
2. Referenced Documents
specimens of fused film of approximately the thickness speci-
2.1 ASTM Standards:
fied for the coating to be applied to the materials, and
D1729 Practice for Visual Appraisal of Colors and Color
1 1
measuring at least 1 ⁄2 by 1 ⁄2 in. (38 by 38 mm).
Differences of Diffusely-Illuminated Opaque Materials
3.3 Prepare standard flat specimens for the evaluation of
D2244 Practice for Calculation of Color Tolerances and
colorcoatingbyduplicatingtheproductionprocessasnearlyas
Color Differences from Instrumentally Measured Color
possible including temperature, particle size, etc.
Coordinates
G90 Practice for Performing Accelerated Outdoor Weather-
3.4 Determine the color of the standard flat specimens in
ing of Nonmetallic Materials Using Concentrated Natural
accordance with Test Method D2244 and Practice D1729.
Sunlight
3.5 Do not allow the color of the specimens to vary more
than 6 Delta E when exposed to 500 000 Langleys accelerated
This specification is under the jurisdiction ofASTM Committee F14 on Fences
weatheringoperatedinaccordancewithPracticeG90withboth
and is the direct responsibility of Subcommittee F14.40 on Chain Link Fence and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.