iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 2591-206:1996

(Main)

Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurement of insulation resistance

Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurement of insulation resistance

This standard specifies a method for measuring the insulation resistance of mated or unmated elements of connection. It shall be used together with EN 2591.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 206: Messung des Isolationswiderstandes

Diese Norm legt ein Verfahren zum Messen des Isolationswiderstandes von gekuppelten oder getrennten Verbindungselementen fest. Sie ist in Verbindung mit EN 2591 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 206: Mesure de la résistance d'isolement

Cette norme spécifie une méthode pour mesurer la résistance d'isolement des organes de connexion accouplés ou non. Elle doit être utilisée conjointement avec EN 2591.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurement of insulation resistance

General Information

Status
Published
Publication Date
20-Feb-1996
Withdrawal Date
30-Aug-1996
ICS
49.060 - Aerospace electric equipment and systems
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2 - Electrical
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
01-Jun-2017
Ref Project
SIST EN 2591-206:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurement of insulation resistance

Buy Standard

EN 2591-206:2001EN 2591-206:2001
PreviousNext
Standard
EN 2591-206:2001
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 206: Measurement of insulation resistanceLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 206: Messung des IsolationswiderstandesSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 206: Me
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 3645-002:2024(Main)
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
SIST EN 3645-002:2024

This document defines the performances and contact arrangements for threaded ring coupling circular connectors, fire resistant or non-fire resistant, intended for use in a temperature range from -65 °C to 175 °C or 200 °C continuous.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-008:2024(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 Ohms - Type KD - Product standard
SIST EN 3375-008:2024

This document specifies the dimensions, tolerances, required characteristics and the mass of an
AWG 24 shielded quad cable, type KD, intended for high speed (100 Mbit/s) full duplex Ethernet
networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and
125 °C.
The cable resists a long-term temperature between −65 °C and +200 °C.
Moreover, cable materials are compatible with 200 °C peak exposure.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The characteristics impedance is (100 ± 15) Ω.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2997-004:2024(Main)
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard
SIST EN 2997-004:2024

This document specifies the characteristics of jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to the class specified in Table 4.
For contacts, filler plugs, and rear accessories associated with this receptacle, see EN 2997-002. For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and o-rings, see EN 2997-012 and EN 2997-013 respectively.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2997-006:2024(Main)
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
SIST EN 2997-006:2024

This document specifies the characteristics of hermetic jam-nut mounted receptacles in the family of circular electrical connectors coupled by threaded ring.
It is applicable to the class specified in Table 4.
For plugs and protective covers, see EN 2997-008 and EN 2997-009 respectively. For spare jam-nuts and O-rings, see EN 2997-012 and EN 2997-013 respectively.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2995-006:2023(Main)
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm & 2,8 mm blade terminal with polarized signal contact - Product standard
SIST EN 2995-006:2024

This document specifies the characteristics of single-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between -55 °C and 125 °C and at an altitude of 15 000 m max.
These circuit breakers are operated by a push-pull type single push button (actuator), with delayed action "trip-free" tripping with a polarized signal contact which is open when main contacts are closed, and inversely.
They will continue to function up to the short-circuit current.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3774-006:2023(Main)
Aerospace series - Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 blade terminal - Product standard
SIST EN 3774-006:2024

This document specifies the characteristics of three-pole circuit breakers, temperature compensated with a rated current from 1 A to 25 A, used in aircraft on-board circuits at a temperature between −55 °C and 125 °C for ratings ≤ 15 A and −55 °C to 90 °C for ratings > 15 A and at an altitude of 15 000 m max.
These circuit breakers are operated by a push-pull type single pushbutton (actuator), with delayed action "trip-free" tripping.
They will continue to function up to the short-circuit current.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2267-011:2023(Main)
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -65 °C and 260 °C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard
SIST EN 2267-011:2024

This document specifies the characteristics of electrical wires DZA family for use in the on board:
- 115 VAC (phase to neutral) or 200 VAC (phase to phase) electrical network of aircraft;
- 230 VAC (phase to neutral) or 400 VAC (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas.
This cable family is used at operating temperature between -65 °C and 260 °C. These cables are demonstrated to be arc resistant for both networks (115 VAC and 230 VAC).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4840-002:2023(Main)
Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions
SIST EN 4840-002:2024

This document lists the product standards, covered by technical specification EN 4840-001, for heat-shrinkable moulded shapes.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2267-012:2023(Main)
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -65 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
SIST EN 2267-012:2024

This document specifies the characteristics of UV laser printable electrical wires DZ family for use in the on board:
- 115 VAC (phase to neutral) or 200 VAC (phase to phase) electrical network of aircraft;
- 230 VAC (phase to neutral) or 400 VAC (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas.
This cable family is used at operating temperature between -65 °C and 260 °C. These cables are demonstrated to be arc resistant for both networks (115 VAC and 230 VAC).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4708-204:2023(Main)
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 204: Limited fire hazard identification sleeves - Operating Temperature range -40 °C to 105 °C - Product standard
SIST EN 4708-204:2024

This document specifies the required characteristics for heat-shrinkable limited fire hazard identification sleeves for use in aircraft electrical systems at operating temperatures between −40 °C and 105 °C.
This document is only applicable for the characterization of identification sleeves. This sleeving is flexible, flame retarded and emits minimum smoke, gases and corrosive by-products when exposed to fire. This sleeving is only applicable for use in areas where smoke, gases or corrosive by-products would constitute a particular hazard.
It is available with a shrink ratio of 2 : 1.
The product is normally supplied with internal diameters up to 51 mm.
The standard colours are white or yellow.
Sizes or colours other than those specifically listed in this document can be available. These items are considered to comply with this document if they comply with the property requirements listed in Table 2 and Table 3, except for dimensions and mass.
As the sleeving to be tested is a printed article, the complete system is to be recorded as part of the evaluation. The sleeve will only be considered as meeting the requirements of this document if printed with the printer, ribbon, inks and settings referenced within the test report.
Mark adherence and print permanence are determined in this specification using method EN 6059-407.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day