EN 3660-015:2008

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45 , unsealed, with cable tie strain relief - Product standard

This product standard defines a range of cable outlets, 45°, style A, for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :    65 °C to 200 °C
   Class W   :    65 °C to 175 °C

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 015: Endgehäuse, Bauform A, 45 , nicht abgedichtet, mit Arm für Kabelbinder - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 015 : Raccord, type A, coudé 45 , non étanche, avec tenue du câble par frettage - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 015. del: Kabelska spojka, tip A, 45°, netesnjena, z držalom za spojko - Standard za proizvod

General Information

• Status: Published
• Publication Date: 15-Apr-2008
• Withdrawal Date: 30-Oct-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3660-015:2008 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45 °, unsealed, with cable tie strain relief - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45 °, unsealed, with cable tie strain relief - Product standardSURL]YRGSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 015 : Raccord, type A, coudé 45 °, non étanche, avec tenue du câble par frettage - Norme de produitLuft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 015: Endgehäuse, Bauform A, 45 °, nicht abgedichtet, mit Arm für Kabelbinder - Produktnorm49.060Aerospace electric equipment and systemsICS:SIST EN 3660-015:2008enTa slovenski standard je istoveten z:EN 3660-015:200801-julij-2008SIST EN 3660-015:2008SLOVENSKI
STANDARD







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-015
April 2008 ICS 49.060 English Version
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015: Cable outlet, style A, 45°, unsealed, with cable tie strain relief - Product standard
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques -Partie 015 : Raccord, type A, coudé 45°, non étanche, avec tenue du câble par frettage - Norme de produit
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 015: Endgehäuse, Bauform A, 45°, nicht abgedichtet, mit Arm für Kabelbinder - Produktnorm This European Standard was approved by CEN on 12 January 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-015:2008: E



EN 3660-015:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Characteristics.4 5 Designation.10 6 Marking.11 7 Technical specification.11



EN 3660-015:2008 (E) 3 Foreword This document (EN 3660-015:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. Attention is drawn to the possibility that some of the ele
...