EN 10328:2005

Iron and steel - Determination of the conventional depth of hardening after surface heating

This document defines the test method for the determination of the conventional depth of hardening after surface heating.

Eisen und Stahl - Bestimmung der Einhärtungstiefe nach dem Randschichthärten

Diese Europäische Norm legt das Verfahren zur Bestimmung der Einhärtungstiefe nach dem Randschichthärten
fest.

Produits sidérurgiques - Détermination de la profondeur conventionnelle de trempe après chauffage superficiel

La présente Norme européenne définit la méthode d�essai pour la détermination de la profondeur conventionnelle
de trempe après chauffage superficiel.

Železo in jeklo – Ugotavljanje globine utrjevanja, doseženega s toplotno obdelavo površine

General Information

• Status: Withdrawn
• Publication Date: 08-Feb-2005
• Withdrawal Date: 29-Mar-2022
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Drafting Committee: ECISS/TC 101 - Test methods for steel (other than chemical analysis)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 30-Mar-2022
• Ref Project: SIST EN 10328:2005 - Iron and steel - Determination of the conventional depth of hardening after surface heating

Relations

• Replaced By: EN ISO 18203:2022 - Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016)
• Effective Date: 09-Mar-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2005
Železo in jeklo – Ugotavljanje globine utrjevanja, doseženega s toplotno obdelavo
površine
Iron and steel - Determination of the conventional depth of hardening after surface
heating
Eisen und Stahl - Bestimmung der Einhärtungstiefe nach dem Randschichthärten
Produits sidérurgiques - Détermination de la profondeur conventionnelle de trempe apres
chauffage superficiel
Ta slovenski standard je istoveten z: EN 10328:2005
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 10328
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 77.040.10
English version
Iron and steel - Determination of the conventional depth of
hardening after surface heating
Produits sidérurgiques - Détermination de la profondeur Eisen und Stahl - Bestimmung der Einhärtungstiefe nach
conventionnelle de trempe après chauffage superficiel dem Randschichthärten
This European Standard was approved by CEN on 3 January 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10328:2005: E
worldwide for CEN national Members.

Contents
Page
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Conventions .4
5 Limits of the method.5
6 Test method.5
7 Test report .6

Foreword
This document (EN 10328:2005) has been prepared by Technical Committee ECISS/TC 2 “Steel – Physico-
chemical and non-destructive testing”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by August 2005, and conflicting national standards shall be withdrawn at the latest by
August 2005.
This document supersedes EURONORM 116:1972.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

1 Scope
This document defines the test method for the determination of the conventional depth of hardening after surface
heating.
2 Normative references
The following ref
...