EN ISO 11670:2003

Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)

ISO 11670:2003 specifies methods for determining laser beam positional as well as angular stability. The test methods given in ISO 11670:2003 are intended to be used for the testing and characterization of lasers.

Laser und Laseranlagen - Prüfverfahren für Laserstrahlparameter - Strahllagestabilität (ISO 11670:2003)

Diese Internationale Norm legt Verfahren zur Bestimmung der Strahllagestabilität sowie der Strahlrichtungsstabilität von Lasern fest. Die in dieser Internationalen Norm dargelegten Prüfverfahren sind für die Anwendung bei der Prüfung und der Charakterisierung von Lasern vorgesehen.

Lasers et équipements associés aux lasers - Méthodes d'essai des paramètres du faisceau laser - Stabilité de visée du faisceau (ISO 11670:2003)

L'ISO 11670:2003 spécifie des méthodes pour la détermination de la stabilité de visée ainsi que de la stabilité angulaire d'un faisceau laser. Les méthodes d'essai données dans l'ISO 11670:2003 sont destinées à être utilisées pour les essais et la détermination des caractéristiques des lasers.

Laserji in laserska oprema - Preskusne metode za parametre laserskega žarka - Stabilnost položaja žarka (ISO 11670:2003)

General Information

• Status: Published
• Publication Date: 31-Mar-2003
• Withdrawal Date: 30-Oct-2003
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CEN/TC 123 - Lasers and photonics
• Drafting Committee: CEN/TC 123 - Lasers and photonics
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Start Date: 17-Dec-2008
• Completion Date: 17-Dec-2008
• Ref Project: SIST EN ISO 11670:2003 - Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)

Relations

• Replaces: EN ISO 11670:1999 - Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:1999)
• Effective Date: 22-Dec-2008
• Corrected By: EN ISO 11670:2003/AC:2004 - Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003/Cor.1:2004)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11670:2003
01-september-2003
1DGRPHãþD
SIST EN ISO 11670:2000
Laserji in laserska oprema - Preskusne metode za parametre laserskega žarka -
Stabilnost položaja žarka (ISO 11670:2003)
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam
positional stability (ISO 11670:2003)
Laser und Laseranlagen - Prüfverfahren für Laserstrahlparameter - Strahllagestabilität
(ISO 11670:2003)
Lasers et équipements associés aux lasers - Méthodes d'essai des parametres du
faisceau laser - Stabilité de visée du faisceau (ISO 11670:2003)
Ta slovenski standard je istoveten z: EN ISO 11670:2003
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11670:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11670:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 11670:2003
EUROPEAN STANDARD
EN ISO 11670
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2003
ICS 31.260 Supersedes EN ISO 11670:1999
English version
Lasers and laser-related equipment - Test methods for laser
beam parameters - Beam positional stability (ISO 11670:2003)
Lasers et équipements associés aux lasers - Méthodes Laser und Laseranlagen - Prüfverfahren für
d'essai des paramètres du faisceau laser - Stabilité de Laserstrahlparameter - Strahllagestabilität (ISO
visée du faisceau (ISO 11670:2003) 11670:2003)
This European Standard was approved by CEN on 21 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11670:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11670:2003
EN ISO 11670:2003 (E)
CORRECTED 2003-06-25
Foreword
This document (EN ISO 11670:2003) has been prepared by Technical Committee ISO/TC 172
"Optics and optical instruments" in collaboration with Technical Committee CEN/TC 123 "Lasers
and laser-related equipment", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2003, and conflicting national
standards shall be withdrawn at the latest by October 2003.
This document supersedes EN ISO 11670:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 11670:2003 has been approved by CEN as EN ISO 11670:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11670:2003
EN ISO 11670:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 11145 2001 Optics and optical inst
...