Dentistry - Diamond rotary instruments - Part 1: General requirements (ISO 7711-1:2021)

This document specifies the general requirements and test methods for diamond rotary instruments used in dentistry, including designation, colour code and grit sizes and a quality control for these instruments.
It applies to all types of diamond rotary instruments independent of type and shape with exception to diamond discs, which are specified in ISO 7711-2.

Zahnheilkunde - Rotierende Diamantinstrumente - Teil 1: Allgemeine Anforderungen (ISO 7711-1:2021)

In diesem Dokument werden allgemeine Anforderungen und Prüfverfahren für in der Zahnheilkunde verwendete rotierende Diamantinstrumente festgelegt, einschließlich Bezeichnung, Farbkennzeichnung und Korngröße und einer Qualitätskontrolle für diese Instrumente.
Es gilt für alle Arten von rotierenden Diamantinstrumenten, unabhängig von Typ und Form, mit Ausnahme von Diamantscheiben, die in ISO 7711 2 beschrieben werden.

Médecine bucco-dentaire - Instruments rotatifs diamantés - Partie 1: Exigences générales (ISO 7711-1:2021)

Le présent document spécifie les exigences générales et les méthodes d’essai relatives aux instruments rotatifs diamantés utilisés en médecine bucco-dentaire, y compris la désignation, le code de couleur et les tailles des grains, ainsi qu’un contrôle de qualité relatif à ces instruments.
Il s’applique à tous les types d’instruments rotatifs diamantés, quels que soient leur type et leur forme, à l’exception des disques diamantés qui sont spécifiés dans l’ISO 7711-2.

Zobozdravstvo - Dentalni diamantni instrumenti - 1. del: Splošne zahteve (ISO 7711-1:2021)

Ta dokument določa splošne zahteve in preskusne metode za dentalne diamantne instrumente, ki se uporabljajo v zobozdravstvu, vključno z oznako, barvno kodo in velikostmi ugriza ter nadzorom kakovosti za te instrumente. Uporablja se za vse vrste diamantnih rotacijskih instrumentov ne glede na vrsto in obliko, razen za diamantne diske, ki so obravnavani v standardu ISO 7711-2.

General Information

Status
Published
Publication Date
23-Nov-2021
Withdrawal Date
30-May-2022
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Nov-2021
Completion Date
24-Nov-2021

Relations

Buy Standard

Standard
EN ISO 7711-1:2022
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2022
Nadomešča:
SIST EN ISO 7711-1:2000
SIST EN ISO 7711-1:2000/A1:2009
SIST EN ISO 7711-3:2005
Zobozdravstvo - Dentalni diamantni instrumenti - 1. del: Splošne zahteve (ISO
7711-1:2021)
Dentistry - Diamond rotary instruments - Part 1: General requirements (ISO 7711-
1:2021)
Zahnheilkunde - Rotierende Diamantinstrumente - Teil 1: Allgemeine Anforderungen
(ISO 7711-1:2021)
Médecine bucco-dentaire - Instruments rotatifs diamantés - Partie 1: Exigences
générales (ISO 7711-1:2021)
Ta slovenski standard je istoveten z: EN ISO 7711-1:2021
ICS:
11.060.25 Zobotehnični instrumenti Dental instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7711-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2021
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN ISO 7711-1:1998, EN ISO 7711-3:2004,
EN ISO 7711-1:1998/A1:2009
English Version
Dentistry - Diamond rotary instruments - Part 1: General
requirements (ISO 7711-1:2021)
Médecine bucco-dentaire - Instruments rotatifs Zahnheilkunde - Rotierende Diamantinstrumente - Teil
diamantés - Partie 1: Exigences générales (ISO 7711- 1: Allgemeine Anforderungen (ISO 7711-1:2021)
1:2021)
This European Standard was approved by CEN on 18 October 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7711-1:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 7711-1:2021) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7711-1:1998, EN ISO 7711-3:2004 and EN ISO 7711-
1:1998/A1:2009.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 7711-1:2021 has been approved by CEN as EN ISO 7711-1:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 7711-1
Second edition
2021-11
Dentistry — Diamond rotary
instruments —
Part 1:
General requirements
Médecine bucco-dentaire — Instruments rotatifs diamantés —
Partie 1: Exigences générales
Reference number
ISO 7711-1:2021(E)
ISO 7711-1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 7711-1:2021(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols . 3
5 Requirements . 3
5.1 Material . 3
5.1.1 Blank . 3
5.1.2 Shank hardness . 3
5.1.3 Working part . 3
5.2 Designation, colour code, grit sizes . 3
5.2.1 Designation . 3
5.2.2 Colour code . 3
5.2.3 Grit size distribution . 4
5.2.4 Grit sizes . 4
5.3 Dimensions . 4
5.3.1 Designated dimensions of overall length . 4
5.3.2 Designated dimensions of the shank . 6
5.3.3 Dimensions of working part . 6
5.4 Bending test to verify the instrument strength . 7
5.4.1 General . 7
5.4.2 Effect on run-out . 7
5.4.3 Breaking test . 7
5.5 Resistance to processing and reprocessing . 8
6 Measurement and test methods .8
6.1 Sampling . 8
6.2 Testing of the dimensions . 8
6.3 Testing of the run-out . 9
6.4 Testing of resistance to processing and reprocessing . 9
6.4.1 Sampling . 9
6.4.2 Equipment . 9
6.4.3 Reagent . 9
6.4.4 Preparation of the test piece . 9
6.4.5 Procedure . 9
6.5 Visual inspection . 9
7 Marking and packaging .10
7.1 Marking on diamond rotary instruments . 10
7.2 Labelling on the package . 10
8 Instructions for use, processing and reprocessing .10
Bibliography .11
iii
ISO 7711-1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval crite
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.