EN 13175:2014

LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings

This European Standard specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this European Standard.
This European Standard does not apply to refineries or other process plants.

Flüssiggas-Geräte und Ausrüstungsteile - Spezifikation und Prüfung für Ventile und Fittinge an Druckbehältern für Flüssiggas (LPG)

Diese Europäische Norm legt Mindestanforderungen für die Auslegung, die Prüfung und die Produktionsprüfung von Ventilen, einschließlich zugehöriger Fittinge fest, die an ortsbeweglichen oder ortsfesten Druckbehältern für Flüssiggas (LPG, en: liquefied petroleum gas) mit einem Fassungsraum über 150 l angebracht sind. Diese Europäische Norm gilt nicht für Sicherheitsventile und deren Zusatzausrüstung, Füllstands¬anzeiger und Bauteile für mit LPG betriebene Fahrzeuge.
Diese Europäische Norm gilt nicht für Raffinerien oder andere verfahrenstechnische Anlagen.

Équipements pour GPL et leurs accessoires - Spécifications et essais des équipements et accessoires des réservoirs pour gaz de pétrole liquéfié (GPL)

La présente Norme européenne définit les exigences minimales de conception, d’essais et d'essais de production pour les équipements et leurs accessoires qui sont raccordés à des réservoirs de GPL sous pression, fixes ou mobiles, dont la capacité en eau est supérieure à 150 l. Les soupapes de sûreté et leurs équipements auxiliaires, les jauges de niveau et les composants pour véhicules GPL sont en dehors du domaine d'application de la présente Norme européenne.
La présente Norme européenne ne s’applique pas aux raffineries ou autres usines de traitement.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Specifikacija in preskušanje ventilov in fitingov za rezervoarje za utekočinjeni naftni plin (UNP)

Ta evropski standard določa minimalne zahteve za načrtovanje, preskušanje in preskušanje proizvodnje ventilov, vključno z ustreznimi fitingi, ki so priključeni na prenosne ali statične rezervoarje za utekočinjeni naftni plin (LPG) s prostornino vode nad 150 l. Tlačni varnostni ventili in njihova pomožna oprema, kazalniki nivoja ter sestavni deli za utekočinjeni plin za motorna vozila ne spadajo na področje uporabe tega evropskega standarda. Ta evropski standard se ne uporablja za rafinerije in druge procesne obrate.

General Information

• Status: Withdrawn
• Publication Date: 18-Nov-2014
• Withdrawal Date: 16-Apr-2019
• ICS: 23.060.01 - Valves in general
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 2 - Design and manufacture of accessories (valves, gauges, fittings) for LPG pressure vessels designed in WG1
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Apr-2019
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 13175:2015 - LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings

Relations

• Replaces: EN 13175:2003+A2:2007 - LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
• Effective Date: 08-Jun-2022
• Replaced By: EN 13175:2019 - LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
• Effective Date: 24-Apr-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.813Flüssiggas-Geräte und Ausrüstungsteile - Spezifikation und Prüfung für Ventile und Fittinge an Druckbehältern für Flüssiggas (LPG)Équipements pour GPL et leurs accessoires - Spécifications et essais des équipements et accessoires des réservoirs pour gaz de pétrole liquéfié (GPL)LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings75.180.01Oprema za industrijo nafte in zemeljskega plina na splošnoEquipment for petroleum and natural gas industries in general23.060.01Ventili na splošnoValves in general23.020.10UH]HUYRDUMLStationary containers and tanksICS:Ta slovenski standard je istoveten z:EN 13175:2014SIST EN 13175:2015en,fr,de01-februar-2015SIST EN 13175:2015SLOVENSKI
STANDARDSIST EN 13175:2003+A2:20071DGRPHãþD



SIST EN 13175:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13175
November 2014 ICS 23.060.01 Supersedes EN 13175:2003+A2:2007English Version
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
Équipements pour GPL et leurs accessoires - Spécificationset essais des équipements et accessoires des réservoirs pour gaz de pétrole liquéfié (GPL)
Flüssiggas-Geräte und Ausrüstungsteile - Spezifikation und Prüfung für Ventile und Fittinge an Druckbehältern für Flüssiggas (LPG) This European Standard was approved by CEN on 14 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13175:2014 ESIST EN 13175:2015



EN 13175:2014 (E) 2 Contents Page Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Operating conditions .9 5 Materials . 10 5.1 General . 10 5.2 Metallic materials . 10 5.3 Non-metallic components . 11 5.4 Lubricants, sealants and adhesives . 11 6 Design – general requirements . 11 6.1 General . 11 6.2 Seats and seals .
...