This document defines test methods and requirements to demonstrate that plastic caps and lids of single-use beverage containers with a capacity of up to three litres remain attached to the containers during the product’s intended use stage, addressing the need to ensure the necessary strength, reliability and safety of beverage container closures, including those for carbonated drinks.
This document addresses the strength reliability and safety of the beverage closures impacted by the attachment features and not those of the overall closure system.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies references to methods for the determination of the following parameters:
-   pH;
-   electrical conductivity.
This document is applicable to solid EU fertilizing products classified as PFC 3(A) and PFC 7 as long as the main function of the EU fertilizing product is classified as PFC 3(A) of Regulation (EU) 2019/1009 [2].

  • Technical specification
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides an overview of relevant methods for the determination of specific parameters in growing media, including:
-   the electrical conductivity;
-   the pH;
-   dry matter;
-   the nitrogen, P2O5 and K2O content extractable by CaCl2/DTPA;
-   the total copper and zinc content;
-   the quantity.
This document is applicable to EU fertilizing products classified as PFC 4 and PFC 7 as long as the main function of the EU fertilizing product is classified as PFC 4 of Regulation (EU) 2019/1009 [2].
This document is not applicable to preformed materials such as mineral wool slabs and foam slabs.

  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides an overview of relevant methods for the determination of specific parameters in solid soil improvers, including:
-   dry matter content;
-   nitrogen content;
-   P2O5 and K2O content;
-   chloride, copper and zinc content;
-   quantity.
This document is applicable to solid EU fertilizing products classified as PFC 3 and PFC 7 as long as the main function of the EU fertilizing product is classified as PFC 3 of Regulation (EU) 2019/1009 [2].

  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides an overview of relevant methods for the properties of compost and solid digestate when used in fertilizing products, including:
-   macroscopic impurities;
-   oxygen uptake rate;
-   self-heating factor.
This document is applicable to the following component material categories: CMC 3, CMC 4 and CMC 5, as specified in the Regulation (EC) No 2019/1009 [2].

  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The scope of this European Standard is to define the classification for commercial beverage coolers and to specify their requirements and test methods. This European Standard is applicable to integral refrigeration systems. This European Standard is not applicable to remote and secondary system cabinets.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The development of a European standard(s) on reporting by online gambling service operators and suppliers to the gambling regulatory authorities in the Member States for the purpose of supervision of online gambling services will specify the core data for reporting purposes, while ensuring integrity and security of the data as well as personal data protection.
The requested European standard(s) will provide a voluntary tool to the gambling regulatory authorities in the Member States without prejudice to the scope of competence of Member States in the regulation of online gambling and without imposing any obligation on them to introduce reporting requirements or to authorize or deny authorization to any operators or suppliers.

  • Standard
    271 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    271 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This document also identifies additional equipment and accessories that can be used on road tankers carrying LPG.
This document does not preclude the use of alternative designs, materials and equipment testing which provide the same or a higher level of safety. ADR [9] requires that such alternative technical codes be recognized by the competent authority, provided that the minimum requirements of section 6.8.2 of ADR [9] are complied with.
This document does not apply to “tank-containers” or “battery-vehicles” used for the transport of LPG.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the procedures to be adopted when checking transportable refillable LPG cylinders before, during and after filling.
This document is applicable to transportable refillable LPG cylinders of water capacity not exceeding 150 l and deemed to be fitted with valves designed according to EN ISO 14245 [4] and EN ISO 15995 [5].
This document does not apply to the requirements for filling LPG cylinders that are designed and equipped for filling by the user.
This document does not apply to the requirements for filling LPG containers on vehicles.
This document is applicable to the following:
—   welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 and EN 12807 [1] or an equivalent standard);
—   welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or an equivalent standard);
—   welded aluminium LPG cylinders (see EN 13110 [2] or an equivalent standard);
—   composite LPG cylinders (see EN 14427 or an equivalent standard); and
—   over-moulded cylinders (OMC).
Specific requirements for the different types of cylinders are detailed in Annex A, Annex B, Annex C, Annex D and Annex G.
This document is intended to be applicable to cylinders complying with RID/ADR [6] [7] (including pi marked cylinders) and also to existing non RID/ADR cylinder populations.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies minimum requirements for the design, testing and production testing of valves, including appropriate fittings, which are connected to mobile or static LPG pressure vessels above 150 l water capacity. Pressure relief valves and their ancillary equipment, contents gauges and automotive LPG components are outside the scope of this document.
This document does not apply to refineries or other process plants.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The development of a European standard(s) on reporting by online gambling service operators and suppliers to the gambling regulatory authorities in the Member States for the purpose of supervision of online gambling services will specify the core data for reporting purposes, while ensuring integrity and security of the data as well as personal data protection.
The requested European standard(s) will provide a voluntary tool to the gambling regulatory authorities in the Member States without prejudice to the scope of competence of Member States in the regulation of online gambling and without imposing any obligation on them to introduce reporting requirements or to authorize or deny authorization to any operators or suppliers.

  • Standard
    271 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    271 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies, as far as the pressure risk is concerned, the rules of design, type testing, fabrication and inspection control of portable fire extinguishers with a metallic body which comply with the requirements of EN 3-7:2004+A1:2007.
This part of EN 3 applies to portable fire extinguishers of which the maximum allowable pressure PS is lower than or equal to 30 bar and containing non-explosive, non-flammable, non-toxic and non-oxidising fluids.
This document also applies to the marking of metallic propellant gas cartridges (see Annex E).
This document does not apply to carbon dioxide fire extinguishers.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the classification for commercial beverage coolers and their requirements and test methods. This document is applicable to integral refrigeration systems.
This document is not applicable to remote and secondary system cabinets.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides an overview of relevant methods for the determination of specific parameters in growing media, including:
—   the electrical conductivity;
—   the pH;
—   dry matter;
—   the nitrogen, P2O5 (phosphorus pentoxide) and K2O (potassium oxide) content extractable by CaCl2/DTPA;
—   the total copper and zinc content;
—   the quantity.
This document is applicable to EU fertilizing products classified as PFC 4 and PFC 7 as long as the main function of the EU fertilizing product is classified as PFC 4 of Regulation (EU) 2019/1009 [1].
This document is not applicable to preformed materials such as mineral wool slabs and foam slabs.

  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies references to methods for the determination of the following parameters:
—   pH;
—   electrical conductivity.
This document is applicable to solid EU fertilizing products classified as PFC 3(A) and PFC 7 as long as the main function of the EU fertilizing product is classified as PFC 3(A) of Regulation (EU) 2019/1009 [1].

  • Technical specification
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the diameter, length, wall thickness and shoulder geometry of flexible cylindrical plastic tubes.
It is applicable to tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of quantity of soil improvers and growing media in bulk and in packages. This method is designed with an appropriate precision level so that it can be used to validate any quantity determination made.
This document is applicable to material in any form, reconstituted if necessary, but not to plugs, blocks and slabs sold as such by dimension; for these, see EN 15761.
This document applies to material that is in solid form, but not in block form to be sold by dimension, and which exceeds the particle size restriction in EN 12580 and where the declared nominal particle size is greater than 60 mm.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the requirements and test methods to demonstrate that plastic caps and lids of single-use beverage containers with a capacity of up to three litres remain attached to the container during the product’s intended use stage. This document also addresses the need to ensure the necessary strength, reliability and safety of beverage container closures, including those for carbonated drinks.
This document applies to the strength, reliability and safety impacted by the attachment features and does not apply to the overall closure system.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides an overview of relevant methods for the determination of specific parameters in solid soil improvers, including:
—   dry matter content;
—   nitrogen content;
—   P2O5 (phosphorus pentoxide) and K2O (potassium oxide) content;
—   chloride content;
—   copper and zinc content;
—   quantity.
This document is applicable to solid EU fertilizing products classified as PFC 3 and PFC 7 as long as the main function of the EU fertilizing product is classified as PFC 3 of Regulation (EU) 2019/1009 [1].

  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies methods for the determination of a quantity of soil improvers and growing media in bulk and in packages. This method is designed with an appropriate precision level so that it can be used to validate any quantity determination made.
This document is applicable to material in any form, reconstituted if necessary, but not to plugs, blocks and slabs sold as such by dimension; for these, see EN 15761.
This document is not applicable for material with more than 10 % (V/V) of particles greater than 60 mm in size; for these, see EN 15238.
The requirements of this document might differ from the national legal requirements for the determination of the products concerned.
Material which has become excessively wet and which cannot be easily broken down into a flowable material will not be suitable for the determination of quantity and might not give a representative result. However, because of the diverse nature and bulk density of these materials, it is not possible to quantify what is ‘excessive’.
This document is intended to be used by manufacturers, buyers and enforcement agencies in verifying claims made for these products.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides an overview of relevant methods for the properties of compost and solid digestate when used in fertilizing products, including:
—   macroscopic impurities;
—   oxygen uptake rate;
—   self-heating factor.
This document is applicable to the following component material categories: CMC 3, CMC 4 and CMC 5, as specified in the Regulation (EU) 2019/1009 [1].

  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies design, type testing, marking, manufacturing tests and examinations requirements for ball valves used as:
closures of refillable transportable gas cylinders, pressure drums and tubes;
main valves for cylinder bundles;
valves for cargo transport units [e.g. trailers, battery vehicles, multi-element gas containers (MEGCs)];
which convey compressed gases, liquefied gases and dissolved gases.
NOTE 1      In this document, the term “valve” is used with the meaning of “ball valve”.
This document does not apply to ball valves for:
oxidizing gases as defined in ISO 10156;
toxic gases (i.e. gases listed in ISO 10298 having an LC50 value ≤ 5 000 ppm
acetylene for single gas cylinders, pressure drums and tubes.
NOTE 2      The reason for the exclusion of oxidizing gases is that the use of ball valves as closures of high-pressure cylinders for oxidizing gases is known to lead to specific ignition hazards that cannot reasonably be mitigated through the ball valve design or type testing. Safety hazards concern both the ball valve itself and any downstream equipment.
NOTE 3      The reason for the exclusion of acetylene for single gas cylinders, pressure drums and tubes is that the risk of an acetylene decomposition cannot reasonably be mitigated through the ball valve design or type testing.
This document does not apply to ball valves for liquefied petroleum gas (LPG), cryogenic equipment, portable fire extinguishers and cylinders for breathing apparatus.
NOTE 4      Requirements for valves for cryogenic vessels are specified in ISO 21011.
NOTE 5      Certain specific requirements for quick-release valves for fixed fire-fighting systems in addition to those that are given in this document are specified in ISO 16003.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for extraction, separation, and determination of inorganic arsenic (iAs) in plant biostimulants using anion-exchange high performance liquid chromatography (HPLC) or ion chromatography (IC) coupled to ICP-MS.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for determination of the content of mercury (Hg) in plant biostimulants using (cold) vapour generation apparatus coupled to an atomic absorption spectrophotometer and a method using a direct amalgamation technique. It is applicable to aqua regia digests prepared according to CEN/TS 17701-1.
NOTE    It is also possible to use other suitable methods for the determination of mercury described in Annex A if users prove that the method gives the same results as the methods described in this document.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies stamp marking requirements for transportable refillable LPG cylinders and metallic drums including:
- Steel LPG cylinders designed and manufactured in accordance with EN 1442, EN 14140, EN 12807 or an equivalent standard or technical code recognized by the Competent Authority.
- LPG metallic drums designed and manufactured in accordance with EN 14893 or an equivalent standard or technical code recognized by the Competent Authority.
- Welded aluminium LPG cylinders designed and manufactured in accordance with EN 13110 or an equivalent standard or technical code recognized by the Competent Authority.
- LPG composite cylinders designed and manufactured in accordance with EN 14427 or an equivalent standard or technical code recognized by the Competent Authority.
NOTE 1 All these types of receptacles are referred to throughout this document as “cylinders”.
This document does not specify any requirements for product, hazard or safety-phrase labelling of packaging which can be required to meet ADR or other legislative requirements.
NOTE 2 The marking of cylinders is regulated by RID/ADR which take precedence over any clause in this document. The European Directive on Transportable Pressure Equipment 2010/35/EU [8] includes additional marking requirements (π-marking). For countries that are not members of the European Union, the π marking is replaced by their relevant conformity mark.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document was developed to provide a method for verifying that hexavalent chromium (CrVI) is not present in plant biostimulants in a concentration that exceeds the respective limits outlined in the EU Regulation on Fertilising Products [1].
This document is applicable to all types of plant biostimulants (solid and liquid ) used in agriculture.
The method described is suitable to quantify the chromium(VI) content in plant biostimulants down to 2 mg/kg.
The results obtained from this method are strictly dependent on the extraction conditions. Results obtained by using other extraction procedures (extraction solution, pH, extraction time, etc.) are not comparable with the results produced by the procedure described in this document.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the extraction and determination of phosphonates (P–PO3) in plant biostimulants using ion chromatography and conductivity detection (IC-CD).
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the procedure for the determination and calculation of the dry matter fraction of plant biostimulants for which the results of performed analysis are to be calculated to the dry matter basis.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the method for taking a sample of solid and liquid forms of organic fertilizers, organo-mineral fertilizers and inorganic fertilizers containing more than 1 % by mass of organic carbon, when in packages, containers or in bulk, to test for levels of controlled pathogens present.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies methods for determining temperature and time profiles during composting and anaerobic digestion for the production of compost and digestate.
The process monitoring is an organized check and recording of the temperature during a specific time of the composting and anaerobic digestion process.
This standard only applies to composting and anaerobic digestion.
This standard is intended to be used by manufacturers, and enforcement agencies for the purpose of manufacturing control.
The requirements of this standard may differ from national legal requirements for the production process of compost and digestate.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard defines the key actors in the eCall chain of service provision as:
1) In-Vehicle System (IVS)/vehicle,
2) Mobile network Operator (MNO),
3) Public safety assistance point [provider](PSAP),
in some circumstances may also involve:
4) Third Party Service Provider (TPSP),
and to provide conformance tests for actor groups 1) - 4).
NOTE Conformance tests are not appropriate nor required for vehicle occupants, although they are the recipient of the service.
This European Standard covers conformance testing (and approval) of new engineering developments, products and systems, and does not imply testing associated with individual installations in vehicles or locations.

  • Draft
    277 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies discharge, handling operations and emergency procedures for rail tankers used for the transport of liquefied petroleum gas (LPG).
This document applies to operations where LPG is off-loaded from rail tankers into LPG fixed storage facilities and road tankers.
This document includes limitations to limit the discharge of rail tankers into other rail tankers.
This document does not apply to "tank containers" and "batteries of receptacles".

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies minimum requirements for the inspection and testing of the LPG road tanker, which includes its pressure vessel, accessories and vehicle LPG equipment.
This document does not specify requirements for the initial inspection (after manufacture) of a pressure vessel, see EN 12493, or for service equipment on the road tanker, see EN 12252.
This document does not apply to compartmented road tankers.
NOTE 1   There is no upper size limit for the pressure vessel as this will be determined by the gross vehicle weight limitation.
NOTE 2   For inspection and testing requirements of equipment other than the pressure vessel, accessories and vehicle LPG equipment, see applicable regulations.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies methods for the determination of quantity of solid and liquid forms of organic fertilizers, organo-mineral fertilizers, inorganic fertilizers, liming materials, inhibitors and blends of these products. It is not applicable to the quantity determination of: growing media, soil improvers and plant biostimulants.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a method to measure and weigh pre-shaped growing media and to calculate the volume and bulk density.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a method for the determination of quantity of soil improvers, excluding liming materials and growing media in bulk and in packages. This document applies to material that is in solid form, but not in block form to be sold by dimension, and which exceeds the particle size restriction in EN 12580 and where the declared nominal particle size is greater than 60 mm.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies methods for the determination of a quantity of soil improvers and growing media in bulk and in packages. This is a reference method, which is designed with an appropriate precision level so that it can be used to validate any quantity declaration made.
This standard is applicable to material that is in solid form, reconstituted if necessary, but not to blocks sold as such by dimension; for these, see EN 15761. This method is not applicable for material with more than 10 % (V/V) of particles greater than 60 mm in size; for these, see EN 15238.
The requirements of this standard may differ from the national legal requirements for the declaration of the products concerned.
Where there is no legal requirement to use this method, for example in quantity control of packaged product, then it is permissible for any other methods to be used so long as these other methods can be demonstrated to be comparable with this standard method in giving the same quantity with the same precision.
Material which has become excessively wet and which cannot be easily broken down into a flowable material will not be suitable for the determination of quantity and may not give a representative result. However, because of the diverse nature and bulk density of these materials, it is not possible to quantify what is ‘excessive’.
This standard is intended to be used by manufacturers, buyers and enforcement agencies in verifying claims made for these products. It is not intended that it should necessarily be used for the purpose of manufacturing control.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document was developed to provide a method for verifying that hexavalent chromium (CrVI) is not present in plant biostimulants in a concentration that exceeds the respective limits outlined in the EU Regulation on Fertilising Products [1].
This document is applicable to all types of plant biostimulants (solid and liquid ) used in agriculture.
The method described is suitable to quantify the chromium(VI) content in plant biostimulants down to 2 mg/kg.
The results obtained from this method are strictly dependent on the extraction conditions. Results obtained by using other extraction procedures (extraction solution, pH, extraction time, etc.) are not comparable with the results produced by the procedure described in this document.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the extraction and determination of phosphonates (P-PO3) in plant biostimulants using ion chromatography and conductivity detection (IC-CD).
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend apply.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for extraction, separation, and determination of inorganic arsenic (iAs) in plant biostimulants using anion-exchange HPLC or IC coupled to ICP-MS.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend apply.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for determination of the content of mercury (Hg) in plant biostimulants using (cold) vapour generation apparatus coupled to an atomic absorption spectrophotometer and a method using a direct amalgamation technique. It is applicable to aqua regia digests prepared according to CEN/TS 17701-1.
NOTE    It is also possible to use other suitable methods for the determination of mercury described in Annex A if users prove that the method gives the same results as the methods described in this document.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend applies.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the procedure for the determination and calculation of the dry matter fraction of plant biostimulants for which the results of performed analysis are to be calculated to the dry matter basis.
This document is also applicable to the blends of fertilizing products where plant biostimulants are the main part of the blend. Otherwise, the Technical Specification for the main part of the blend apply.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard describes methods for checking that plain detonators, electric detonators, non-electric detonators, shock tubes and relays will not explode when subject to an impact under specified conditions.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies minimum requirements for self-contained closed-circuit breathing RPDs for escape (short: oxygen escape RPD)
a) chemical oxygen type
    ― Potassium superoxide (KO2),
    ― Sodium chlorate (NaClO3) and
b) compressed oxygen type.
This document does not apply to RPD for work and rescue and to diving apparatus.
Laboratory and practical performance tests are included for the assessment of compliance with the requirements.

  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day