EN 13171:2008
(Main)Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
Thermal insulating products for buildings - Factory made wood fibre (WF) products - Specification
This European Standard specifies the requirements for factory made wood fibre products, with or without facings or coatings, which are used for the thermal insulation of buildings . The products are manufactured in the form of rolls, batts, felts, boards or slabs.
This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this European Standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
This European Standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application are to be found in regulations or non conflicting standards.
Products with a declared thermal resistance lower than 0,50 m2K/W or a declared thermal conductivity greater than 0,070 W/(mK) at 10 °C are not covered by this European Standard.
This European Standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations.
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Holzfasern (WF) - Spezifikation
Diese Europäische Norm legt die Anforderungen an werkmäßig hergestellte Erzeugnisse aus Holzfasern einschließlich etwaiger Kaschierungen und Beschichtungen fest, die zur Wärmedämmung von Gebäuden verwendet werden. ) Die Produkte werden in Form von Rollen, Formstücken, Matten oder Platten hergestellt.
Diese Europäische Norm beschreibt Stoffeigenschaften und enthält Prüfverfahren sowie Festlegungen für den Übereinstimmungsnachweis, die Kennzeichnung und die Etikettierung.
Dämmstoffe nach dieser Europäischen Norm werden auch in vorgefertigten Wärmedämmsystemen sowie Verbundelementen verwendet. Brauchbarkeitsnachweise für derartige Systeme mit Holzfaserdämmstoffen werden nicht durch diese Norm abgedeckt.
Diese Europäische Norm legt keine Anforderungsniveaus für eine vorgegebene Eigenschaft fest, die die Gebrauchstauglichkeit für einen bestimmten Anwendungsfall gewährleisten. Die jeweils erforderlichen Klassen und Stufen für eine vorgegebene Verwendung können aus Regelwerken oder anderen dieser Norm nicht widersprechenden Normen entnommen werden.
Diese Europäische Norm gilt nicht für Produkte mit einem Nennwert des Wärmedurchlasswiderstandes von weniger als 0,5 m2 K/W oder deren Nennwert der Wärmeleitfähigkeit größer als 0,070 W/(m K) bei 10 °C Mitteltemperatur ist.
Diese Europäische Norm gilt nicht für an der Baustelle (in situ) hergestellte Wärmedämmstoffe sowie für Produkte, die zur Wärmedämmung von haus oder betriebstechnischen Anlagen vorgesehen sind.
Produits isolants thermiques pour le bâtiment - Produits manufacturés en fibres de bois (WF) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés en fibre de bois, avec ou sans parements, utilisés pour l’isolation thermique des bâtiments ). Les produits sont fabriqués sous forme de rouleaux, bandes, feutres, panneaux ou plaques.
La présente norme décrit les caractéristiques de ces produits et comporte des modes opératoires d’essai, d’évaluation de conformité, de marquage et d’étiquetage.
Les produits couverts par la présente Norme européenne sont également utilisés dans les systèmes d’isolation thermique préfabriqués et les panneaux composites ; les performances des systèmes incorporant ces produits ne sont pas traitées.
La présente norme ne spécifie pas de niveau à atteindre par le produit pour une propriété donnée, pour démontrer son aptitude à l’usage dans une application particulière. Les niveaux/classes requis pour une application donnée figurent dans les réglementations ou dans les normes non contradictoires.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,50 m2K/W ou dont la conductivité thermique déclarée à une température de 10 °C est supérieure à 0,070 W/(mK) ne sont pas du domaine d’application de la présente norme.
Les produits mis en œuvre in situ et ceux destinés à être utilisés pour l’isolation des équipements du bâtiment et des installations industrielles ne sont pas du domaine d’application de la présente Norme européenne.
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz lesnih vlaken (WF) - Specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz lesnih vlaken (WF) - SpecifikacijaWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Holzfasern (WF) - SpezifikationProduits isolants thermiques pour le bâtiment - Produits manufacturés en fibres de bois (WF) - SpécificationThermal insulating products for buildings - Factory made wood fibre (WF) products - Specification91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13171:2008SIST EN 13171:2009en,fr,de01-februar-2009SIST EN 13171:2009SLOVENSKI
STANDARDSIST EN 13171:2002/AC:2006SIST EN 13171:2002/A1:2004SIST EN 13171:20021DGRPHãþD
SIST EN 13171:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13171November 2008ICS 91.100.60Supersedes EN 13171:2001
English VersionThermal insulating products for buildings - Factory made woodfibre (WF) products - SpecificationProduits isolants thermiques pour le bâtiment - Produitsmanufacturés en fibres de bois (WF) - SpécificationWärmedämmstoffe für Gebäude - Werkmäßig hergestellteProdukte aus Holzfasern (WF) - SpezifikationThis European Standard was approved by CEN on 18 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13171:2008: ESIST EN 13171:2009
EN 13171:2008 (E) 2 Contents Page Foreword .4 1 Scope .6 2 Normative references .6 3 Terms, definitions, symbols, units and abbreviated terms .8 4 Requirements . 11 5 Test methods . 18 6 Designation code . 21 7 Evaluation of conformity . 21 8 Marking and labelling . 22 Annex A (normative)
Determination of the declared values of thermal resistance and
thermal conductivity . 23 Annex B (normative)
Factory production control . 25 Annex C (informative)
Additional properties . 28 Annex D (informative)
Examples for the determination of the declared values of thermal resistance and thermal conductivity for a product or a product group . 29 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 32 Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.