CEN/TR 16625:2013

Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic

This Technical Report is a guideline for the statistic approach for the definition of MLV/MDV within the declaration of values according to the product standards of CEN/TC 254 'Flexible sheets for waterproofing' (see Bibliography). Characteristics with classes (for example fire behaviour) or pass/fail criteria (for example UV exposure) are not covered by the statistical rules of this report.

Abdichtungsbahnen - Statistische Definition des Hersteller-Grenzwertes und des Hersteller-Nennwertes (MLV und MDV) - 95 %-Statistik

Dieser Technische Bericht ist eine Leitlinie für die statistische Definition von MLV/MDV im Rahmen der Wertedeklarierung nach den Produktnormen von CEN/TC 254 „Abdichtungsbahnen“ (siehe Literaturhinweise). Eigenschaften mit Klassen (zum Beispiel Brandverhalten) oder Bestanden/Nicht bestanden-Kriterien (zum Beispiel UV Beanspruchung) sind durch die statistischen Festlegungen dieses Berichtes nicht abgedeckt.

Feuilles souples d'étanchéité - Définition statistique de la valeur limite annoncée par le fabricant (VLF) et de la valeur déclarée par le fabricant (VDF) - Statistique à 95 %

Le présent rapport technique a pour objet de fournir une ligne directrice pour l'approche statistique de la définition de la valeur limite annoncée par le fabricant (VLF) et de la valeur déclarée par le fabricant (VDF), pour la déclaration de valeurs dans le cadre des normes de produit du CEN/TC 254 "Feuilles souples d'étanchéité" (voir Bibliographie). Les caractéristiques liées à des classes (par exemple, le comportement au feu) ou à des critères d'acceptation/rejet (par exemple, l'exposition aux UV) ne relèvent pas des règles statistiques faisant l'objet du présent rapport.

Hidroizolacijski trakovi - Definicija proizvajalčeve mejne vrednosti (MLV) in proizvajalčeve deklarirane vrednosti (MDV) - 95-odstotna statistika

To tehnično poročilo vsebuje smernice za statistični pristop k definiciji proizvajalčeve mejne vrednosti/proizvajalčeve deklarirane vrednosti (MLV/MDV) v okviru izjave o vrednostih v skladu s standardi za izdelke tehničnega odbora CEN/TC 254 »Hidroizolacijski trakovi za tesnjenje« (glej bibliografijo). Značilnosti z razredi (npr. obnašanje pri gorenju) ali merila glede ustreznosti/neustreznosti (npr. izpostavljenost UV) niso zajeti v statistična pravila tega poročila.

General Information

• Status: Published
• Publication Date: 03-Dec-2013
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/WG 13 - MLV and MDV
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 04-Dec-2013
• Due Date: 26-Feb-2014
• Completion Date: 04-Dec-2013
• Ref Project: SIST-TP CEN/TR 16625:2014 - Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % Statistic

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 16625:2013
01-september-2013
+LGURL]RODFLMVNLWUDNRYL'HILQLFLMDSURL]YDMDOþHYHPHMQHYHGQRVWL0/9LQ
SURL]YDMDOþHYHGHNODULUDQHYHGQRVWL0'9±RGVWRWQDVWDWLVWLND
Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value
and declared value (MLV and MDV) - 95 % Statistic
Abdichtungsbahnen - Statistische Definition des Hersteller-Grenzwertes und des
Hersteller-Nennwertes (MLV und MDV) - 95 % Statistik
Feuilles souples d'étanchéité - Définition statistique de la valeur limite annoncée par le
fabricant (VLF) et de la valeur déclarée par le fabricant (VDF) - Statistique à 95 %
Ta slovenski standard je istoveten z: FprCEN/TR 16625
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
kSIST-TP FprCEN/TR 16625:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

kSIST-TP FprCEN/TR 16625:2013
kSIST-TP FprCEN/TR 16625:2013
TECHNICAL REPORT
FINAL DRAFT
FprCEN/TR 16625
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
June 2013
ICS 91.100.50
English Version
Flexible sheets for waterproofing - Statistical definition of
manufacturer's limiting value and declared value (MLV and
MDV) - 95 % Statistic
Feuilles souples d'étanchéité - Définition statistique de la Abdichtungsbahnen - Statistische Definition des Hersteller-
valeur limite annoncée par le fabricant (VLF) et de la valeur Grenzwertes und des Hersteller-Nennwertes (MLV und
déclarée par le fabricant (VDF) - Statistique à 95 % MDV) - 95 % Statistik

This draft Technical Report is submitted to CEN members for Technical Committee Approval. It has been drawn up by the Technical
Committee CEN/TC 254.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a Technical Report.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 16625:2013: E
worldwide for CEN national Members.

kSIST-TP FprCEN/TR 16625:2013
FprCEN/TR 16625:2013 (E)
Contents
Foreword .3
1 Scope .4
2 Terms and definitions .4
3 Statistical principles .4
3.1 General .4
3.2 MLV/MDV defined by 95% performance based confidence level .4
Bibliography .6

kSIST-TP FprCEN/TR 16625:2013
FprCEN/TR 16625:2013 (E)
Foreword
This document (FprCEN/TR 16625:2013) has been prepared by Technical Committee CEN/TC 254 “Flexible
sheets for waterproofing”, the secretariat of which is held by NEN.
This document is currently submitted to the Technical Committee Approval.
kSIST-TP FprCEN/TR 16625:2013
FprCEN/TR 16625:2013 (E)
1 Scope
This Technical Report is a guideline for the statistic approach for the definition of MLV/MDV within the declaration
of values according to the product standards of CEN/TC 254 'Flexible sheets for waterproofing' (see bibliography).
Characteristics with classes (for example fire behaviour) or pass/fail criteria (for example UV exposure) are not
covered by the statistical rules of this report.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
NOTE Terms for statistics are common knowledge described in different standards (for example ISO 3534-1;
ISO/IEC Guide 98-3; ISO TR 13425).
2.1
manufacturer's declared value (MDV)
nominal value including a double sided specification according to the product standard for a given test method or
property
2.2
manufacturer’s limiting val
...

SLOVENSKI STANDARD
01-januar-2014
+LGURL]RODFLMVNLWUDNRYL'HILQLFLMDSURL]YDMDOþHYHPHMQHYUHGQRVWL0/9LQ
SURL]YDMDOþHYHGHNODULUDQHYUHGQRVWL0'9RGVWRWQDVWDWLVWLND
Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value
and declared value (MLV and MDV) - 95 % Statistic
Abdichtungsbahnen - Statistische Definition des Hersteller-Grenzwertes und des
Hersteller-Nennwertes (MLV und MDV) - 95 % Statistik
Feuilles souples d'étanchéité - Définition statistique de la valeur limite annoncée par le
fabricant (VLF) et de la valeur déclarée par le fabricant (VDF) - Statistique à 95 %
Ta slovenski standard je istoveten z: CEN/TR 16625:2013
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CEN/TR 16625
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
December 2013
ICS 91.100.50
English Version
Flexible sheets for waterproofing - Statistical definition of
manufacturer's limiting value and declared value (MLV and
MDV) - 95 % Statistic
Feuilles souples d'étanchéité - Définition statistique de la Abdichtungsbahnen - Statistische Definition des Hersteller-
valeur limite annoncée par le fabricant (VLF) et de la valeur Grenzwertes und des Hersteller-Nennwertes (MLV und
déclarée par le fabricant (VDF) - Statistique à 95 % MDV) - 95 %-Statistik

This Technical Report was approved by CEN on 28 October 2013. It has been drawn up by the Technical Committee CEN/TC 254.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 16625:2013 E
worldwide for CEN national Members.

Contents Page
Foreword 3
1 Scope 4
2 Terms and definitions 4
3 Statistical principles 4
3.1 General 4
3.2 MLV/MDV defined by 95 % performance based confidence level 5
Bibliography 6
Foreword
This document (CEN/TR 16625) has been prepared by Technical Committee CEN/TC 254
“Flexible sheets for waterproofing”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying
any or all such patent rights.
1 Scope
This Technical Report is a guideline for the statistic approach for the definition of MLV/MDV
within the declaration of values according to the product standards of CEN/TC 254 'Flexible
sheets for waterproofing' (see Bibliography). Characteristics with classes (for example fire
behaviour) or pass/fail criteria (for example UV exposure) are not covered by the statistical
rules of this report.
2 Terms and definitions
For the purposes of the document, the following terms and definitions apply.
NOTE Terms for statistics are common knowledge and are described in different standards (for
example ISO 3534-1; ISO/IEC Guide 98-3; ISO/TR 13425).
2.1
1)
manufacturer's declared value (MDV)
nominal value including a double sided specification according to the product standard for a
given test method or property
2.2
1)
manufacturer’s limiting value (MLV)
nominal value including a single sided specification according to the product standard for a
given test method or property
Note 1 to entry: The MLV can be a minimum or a maximum value according to statements made
under product characteristics of the relevant product standard.
2.3
single value
value of one test specimen as described within the test standard
2.4
test result
result as defined in the test standard
Note 1 to entry: The test result is described in the Clause ´Expression of results´ of the test standard
and reported in the test report.
3 Statistical principles
...