CEN/TS 15480-3:2010

Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface

ECC part 3 will provide an Interoperability Model, which will enable an eService compliant with technical requirements, to interoperate with different implementations of the European Citizen Card.
This Interoperability model will be developed as follows:
-   starting from the ECC part 2, part 3 of the ECC series will provide additional technical specifications for a middleware architecture based on ISO/IEC 24727. This middleware will provide an API to an eService as per ISO/IEC 24727-3;
-   a set of additional API provide the middleware stack with means to facilitate ECC services;
-   a standard mechanism for the validation of the e-ID credential stored in the ECC and retrieved by the service.
In order to support the ECC services over an ISO/IEC 24727 middelware configuration, this part of the standard specifies the following:
-   a set of mandatory requests to be supported by the middleware implementation based on ISO/IEC 24727;
-   data set content for interoperability to be personalized in the ECC;
-   two middleware architecture solutions: one based on a stack of combined ISO/IEC 24727 configurations and the other based on Web Service configuration;
-   a Global Profile featuring the guidelines for card-applications to fit in ISO/IEC 24727 framework.

Identifikationskartensysteme - Europäische Bürgerkarte - Teil 3: Anwendungsschnittstelle für die Interoperabilität von Europäischen Bürgerkarten

Systèmes d'Identification par Carte - Carte Européenne de Citoyen - Partie 3: Interoperabilité de la Carte européenne de Citoyen par interface applicative

Sistemi z identifikacijskimi karticami - Kartica evropskih državljanov - 3. del: Medobratovalnost kartice evropskih državljanov z uporabo aplikacijskega vmesnika

3. del ECC bo zagotovil medobratovalni model, ki bo omogočal eStoritve v skladu s tehničnimi zahtevami, za medobratovanje z različnimi implementacijami kartice evropskih državljanov. Ta medobratovalni model bo razvit:
- začne se z 2. delom ECC, pri čemer bo 3. del serij ECC zagotovil dodatne tehnične specifikacije za arhitekturo vmesne programske opreme, ki temelji na ISO/IEC 24727. Ta vmesna programska oprema bo zagotovila API za eStoritve, skladno z ISO/IEC 24727-3;
- iz sklopa dodatnih API, ki zagotavlja sklad vmesne programske opreme z možnostjo pospeševanja storitev ECC;
- iz standardnega mehanizma za validacijo poverilnice e-ID, shranjene v ECC, dostopnega s storitvijo. V podporo storitvam ECC pred konfiguracijo vmesne programske opreme ISO/IEC 24727, ta del standarda določa naslednje:
- sklop obveznih zahtev, ki jih bo podpirala implementacija vmesne programske opreme, temelječa na ISO/IEC 24727;
- vsebino sklopa podatkov za medobratovalnost, ki bo v ECC prilagojena;,
- dve arhitekturni rešitvi vmesne programske opreme; od tega ena temelji na skladu združenih konfiguracij ISO/IEC 24727, druga pa na konfiguraciji spletne storitve;
- globalni profil s smernicami za aplikacije kartic, da ustrezajo okviru ISO/IEC 24727.

General Information

• Status: Withdrawn
• Publication Date: 07-Dec-2010
• Withdrawal Date: 01-Apr-2014
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: CEN/TC 224 - Machine-readable cards, related device interfaces and operations
• Drafting Committee: CEN/TC 224/WG 15 - European citizen card
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Apr-2014
• Completion Date: 02-Apr-2014
• Ref Project: SIST-TS CEN/TS 15480-3:2011 - Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface

Relations

• Replaced By: CEN/TS 15480-3:2014 - Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface
• Effective Date: 13-Feb-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2011
Sistemi z identifikacijskimi karticami - Kartica evropskih državljanov - 3. del:
Medobratovalnost kartice evropskih državljanov z uporabo aplikacijskega
vmesnika
Identification card systems - European Citizen Card - Part 3: European Citizen Card
Interoperability using an application interface
Identifikationskartensysteme - Europäische Bürgerkarte - Teil 3:
Anwendungsschnittstelle für die Interoperabilität von Europäischen
Systèmes d'Identification par Carte - Carte Européenne de Citoyen - Partie 3:
Interoperabilité de la Carte européenne de Citoyen par interface applicative
Ta slovenski standard je istoveten z: CEN/TS 15480-3:2010
ICS:
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CEN/TS 15480-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2010
ICS 35.240.15
English Version
Identification card systems - European Citizen Card - Part 3:
European Citizen Card Interoperability using an application
interface
Systèmes d'Identification par Carte - Carte Européenne de Identifikationskartensysteme - Europäische Bürgerkarte -
Citoyen - Partie 3: Interoperabilité de la Carte européenne Teil 3: Anwendungsschnittstelle für die Interoperabilität von
de Citoyen par interface applicative Europäischen Bürgerkarten
This Technical Specification (CEN/TS) was approved by CEN on 12 July 2010 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15480-3:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .6
1 Scope .7
2 Normative references .7
3 Terms and definitions .8
4 Symbols and abbreviations .8
4.1 Abbreviations .8
5 ECC fitting in ISO/IEC 24727 model . 11
5.1 ISO/IEC 24727 main features . 11
5.2 General security issues – Applicable 24727-4 Stack Configurations for the ECC
environment . 13
5.3 ECC-3 Middleware Architecture . 16
5.3.1 Service Access Layer (SAL) . 17
5.3.2 Generic Card Access Layer (GCAL) . 17
5.3.3 Interface Device Layer and API (IFD API) . 17
5.3.4 ECC-3 Stack Distribution and Connection Handling . 17
5.3.5 A Web Service based architecture for ECC-3 framework . 21
5.3.6 XML-based SAL interface . 26
5.3.7 Smart card profile fitting with ECC-3 stack . 26
6 Card Discovery Mechanisms . 27
6.1 Discovery decision tree . 28
6.2 Migration path towards ECC and provision for legacy cards . 29
6.2.1 Interoperable access to the Repository . 30
6.3 Set of data for interoperability . 32
6.4 Application and Card Capability Descriptors . 32
6.5 ISO/IEC 7816-15 implementation . 34
6.5.1 Profile designation within EF.DIR . 35
6.5.2 ISO/IEC 24727-3 data structures mapping . 35
6.5.3 SAL-API Action mapping onto ISO/IEC 7816-15 attributes . 51
6.5.4 ISO/IEC 24727-3 data structures storage onto the card . 53
6.5.5 General discovery mechanism . 55
6.6 Other data descriptor . 57
7 Authentication protocols . 57
7.1 Authentication Mechanisms based on ISO/IEC 24727 SAL-API . 57
7.2 Asymmetric internal authentication. 58
7.3 Asymmetric external authentication . 58
7.4 Symmetric internal authentication . 58
7.5 Symmetric external authentication . 59
7.6 Mutual authentication with key establishment . 59
7.7 Device authentication with non traceability . 59
7.8 Key transport protocol based on RSA . 59
7.9 Terminal Authentication . 60
8 IFD-API Web Service Binding . 60
8.1 Specification of ISOCommon.XSD . 60
8.2 Specification of ISOIFD.XSD . 61
8.3 Specification of CENIFD.WSDL . 74
8.4 Specification of CENIFDCallback.XSD . 83
8.5 Definition of CENCallback.WSDL . 84
9 Card-Info Structure . 85
9.1 Introduction . 85
9.2 Overview . 86
9.3 CardType . 87
9.4 CardIdentification . 88
9.5 CardCapabilities . 94
9.6 ApplicationCapabilities . 103
9.7 Signature . 109
9.8 Complete XML-Schema Definition . 109
10 XML-based Service Access Layer Interface . 112
10.1 XML-Schema definitions for Service Access Layer functions . 112
10.2 WSDL definitions for Service Access Layer functions . 137
Annex A (informative) Interface Device Layer Architecture and Management . 161
A.1 Scope . 161
A.2 IFD-Layer Architecture . 161
A.3 Resource Manager . 162
A.3.1 IFD-Handlers . 162
A.3.2 Card transactions . 162
A.3.3 Application threads . 162
A.4 Administrative functions . 162
A.4.1 IFD-Handler related functions . 162
A.4.2 Interface Device related functions . 163
A.5 IFD-Handler-API . 163
Annex B (informative) Interface Device API . 164
B.1 Card terminal related functions . 164
B.1.1 EstablishContext . 164
B.1.2 ReleaseContext . 165
B.1.3 ListIFDs. 165
B.1.4 GetIFDCapabilities . 166
B.1.5 GetStatus . 168
B.1.6 Wait . 170
B.1.7 Cancel . 171
B.1.8 ControlIFD .
...