EN 2632:2005

Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D <or= 150 mm with peripheral coarse grain control

This standard specifies the requirements relating to:
Aluminium alloy AL-P7075-
T73511
Extruded bar and section
a or D with peripheral coarse grain control
for aerospace application.
This standard may also be used to supply material in the T73510 condition if specified by the purchaser on the order and the product is marked accordingly.

Luft- und Raumfahrt - Aluminiumlegierung AL-P7075 - T73511 - Stranggepresste Stange und Profile - a oder D <or= 150 mm mit Kontrolle der Grobkornrandzone

Diese Norm legt die Anforderungen an
Aluminiumlegierung AL-P7075-
T73511
stranggepresste Stangen und Profile
a oder D  150 mm
mit Kontrolle der Grobrandzone
für Anwendungen in der Luft- und Raumfahrt fest.
Diese Norm kann auch für die Lieferung des Werkstoffs im Zustand T73510 verwendet werden, wenn der Käufer dies in der Bestellung angibt und das Halbzeug entsprechend gekennzeichnet ist.

Série aérospatiale - Alliage d'aluminium AL-P7075 - T73511 - Barres et profilés filés - a ou D <or= 150 mm avec contrôle de la zone périphérique à gros grains

Aeronavtika – Aluminijeva zlitina AL-P7075 - T73511 – Iztiskane palice in profili - a ali D ? 150 mm s kontrolo debelozrnatega obrobja

General Information

• Status: Published
• Publication Date: 25-Oct-2005
• Withdrawal Date: 29-Apr-2006
• ICS: 49.025.20 - Aluminium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Oct-2005
• Completion Date: 26-Oct-2005
• Ref Project: SIST EN 2632:2006 - Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D <or= 150 mm with peripheral coarse grain control

Relations

• Replaces: EN 2632:1993 - Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D <= 100 mm with peripheral coarse grain control
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D STANDARDSIST EN 2632:200601-julij-2006

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2632
October 2005 ICS 49.025.20 Supersedes EN 2632:1993 English Version
Aerospace series - Aluminium alloy AL-P7075 - T73511 - Extruded bar and section - a or D ≤ 150 mm with peripheral coarse grain control
Série aérospatiale - Alliage d'aluminium AL-P7075 - T73511 - Barres et profilés filés - a ou D ≤ 150 mm avec contrôle de la zone périphérique à gros grains
Luft- und Raumfahrt - Aluminiumlegierung AL-P7075 - T73511 - Stranggepreßte Stange und Profile - a oder D ≤ 150 mm mit Kontrolle der Grobkornrandzone This European Standard was approved by CEN on 26 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2632:2005: E
...