EN 4165-001:2007
(Main)Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for rectangular connectors with multiple removable modules, intended for use in a temperature range from 55 °C to 175 °C continuous.
This family of connectors is particularly suitable for aeronautic use in zones of severe environmental conditions on board aircraft, applying EN 2282.
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 001: Technische lieferbedingungen
Diese Norm legt die allgemeingültigen Eigenschaften, die Qualifikations-, Abnahme- und Qualitätssicherungs¬bedingungen sowie die Prüfprogramme und gruppen für Rechtecksteckverbinder mit mehreren demontier¬baren Modulen fest, die für den Einsatz in einem Temperaturbereich von -55 °C bis 175 °C konstant bestimmt sind.
Diese Steckverbinderfamilie ist besonders geeignet zur Verwendung in der Luftfahrt in Bereichen mit ver¬schärften Umweltbedingungen an Bord von Luftfahrzeugen entsprechend EN 2282.
Série aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175°C continu - Partie 001 : Spécification technique
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 001. del: Tehnična specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 001: Technische lieferbedingungenSérie aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175°C continu - Partie 001 : Spécification techniqueAerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4165-001:2007SIST EN 4165-001:2009en01-februar-2009SIST EN 4165-001:2009SLOVENSKI
STANDARD
SIST EN 4165-001:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4165-001
April 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, rectangular, modular -Operating temperature 175 °C continuous - Part 001: Technical specification
Série aérospatiale - Connecteurs électriques modulaires - Températures d'utilisation 175 °C continu - Partie 001 : Spécification technique
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 001: Technische lieferbedingungen This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4165-001:2007: ESIST EN 4165-001:2009
EN 4165-001:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Description.5 5 Design.7 6 Definition drawings and masses.8 7 Details contact cavities.27 8 Contact arrangements.28 9 Tests according to EN 2591-100.30 10 Tooling testing.38 11 Quality assurance.40 12 Qualification.40 13 Maintenance of qualification.43 14 Quality control.44 15 Designation and mar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.