prEN ISO 25202
(Main)Leather - Chemical analysis - Determination of glutaraldehyde content (ISO/DIS 25202:2024)
Leather - Chemical analysis - Determination of glutaraldehyde content (ISO/DIS 25202:2024)
This international standard specifies a method for the determination of the content of Leather.
This method is based on high performance liquid chromatography (HPLC). It is selective and not sensitive to coloured extracts.
Leder - Chemische Analyse - Bestimmung des Glutaraldehydgehalts (ISO/DIS 25202:2024)
Cuir - Analyse chimique - Détermination de la teneur en glutaraldéhyde (ISO/DIS 25202:2024)
Usnje - Kemijska analiza - Določevanje vsebnosti glutaraldehida (ISO/DIS 25202:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Usnje - Kemijska analiza - Določevanje vsebnosti glutaraldehida (ISO/DIS
25202:2024)
Leather - Chemical analysis - Determination of glutaraldehyde content (ISO/DIS
25202:2024)
Leder - Chemische Analyse - Bestimmung des Glutaraldehydgehalts (ISO/DIS
25202:2024)
Cuir - Analyse chimique - Détermination de la teneur en glutaraldéhyde (ISO/DIS
25202:2024)
Ta slovenski standard je istoveten z: prEN ISO 25202
ICS:
59.140.30 Usnje in krzno Leather and furs
71.040.40 Kemijska analiza Chemical analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 25202
IULTCS
IUC 40
IULTCS
Leather — Chemical analysis —
Secretariat: ISO
Determination of glutaraldehyde
content
Voting begins on:
2024-12-11
ICS: 59.140.30
Voting terminates on:
2025-03-05
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference numbers
ISO/DIS 25202:2024(en)
IULTCS/IUC 40:2024(en)
DRAFT
ISO/DIS 25202:2024(en)
International
Standard
ISO/DIS 25202
IULTCS
IUC 40
IULTCS
Leather — Chemical analysis —
Secretariat: ISO
Determination of glutaraldehyde
content
Voting begins on:
ICS: 59.140.30
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Reference numbers
Published in Switzerland ISO/DIS 25202:2024(en)
IULTCS/IUC 40:2024(en)
ii
ISO/DIS 25202:2024(en)
IULTCS/IUC 40:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 1
6 Apparatus . 2
7 Preparation of test specimens . 2
8 Procedure . 3
8.1 Sample processing .3
8.1.1 Extraction .3
8.1.2 Reaction with DNPH .3
8.2 Determination by LC .3
9 Expression of results . 4
9.1 General .4
9.2 Calculation of the glutaraldehyde content .4
9.3 Precision of the test method .4
10 Test report . 4
Annex A (informative) LC conditions . 5
Bibliography . 6
iii
ISO/DIS 25202:2024(en)
IULTCS/IUC 40:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO [had/had not] received notice of
(a) patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www.iso.org/iso/foreword.html.
This document was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 289, Leather, in collaboration with the Chemical Test Commission of the International Union of
Leather Technologists and Chemists Societies (IUC Commission, IULTCS), in accordance with the Agreement
on technical cooperation between ISO and CEN (Vienna Agreement). This method is technically similar to
the Colorimetric Section of the method IUC 19 which was declared an official method at the IULTCS Delegates
meeting on 31st May 2003 i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.