EN ISO 4622:1994

Paints and varnishes - Pressure test for stackability (ISO 4622:1992)

This international standard specifies a test method for determining, under standard conditions, whether a single-coat film or a multi-coat system of paints or related materials after a specified drying period is sufficiently dry to resist damage when two painted surfaces or one painted surface and another surface are placed in contact under pressure.

Lacke und Anstrichstoffe - Druckprüfung zur Bestimmung der Stapelfähigkeit (ISO 4622:1992)

Diese Internationale Norm gehört zu einer Reihe von Normen, welche die Probenahme und Prüfung von Lacken, Anstrichstoffen und ähnlichen Beschichtungsstoffen behandelt.

Peintures et vernis - Essai de pression pour aptitude à l'empilement (ISO 4622:1992)

Barve in laki - Preskus odpornosti proti poškodbam pri zlaganju (ISO 4622:1992)

General Information

• Status: Withdrawn
• Publication Date: 25-Aug-1994
• Withdrawal Date: 28-Feb-2010
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Mar-2010
• Completion Date: 01-Mar-2010
• Ref Project: SIST EN ISO 4622:1997 - Paints and varnishes - Pressure test for stackability (ISO 4622:1992)

Relations

• Replaced By: EN ISO 9117-2:2010 - Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010)
• Effective Date: 06-Mar-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4622:1997
01-december-1997
Barve in laki - Preskus odpornosti proti poškodbam pri zlaganju (ISO 4622:1992)
Paints and varnishes - Pressure test for stackability (ISO 4622:1992)
Lacke und Anstrichstoffe - Druckprüfung zur Bestimmung der Stapelfähigkeit (ISO
4622:1992)
Peintures et vernis - Essai de pression pour aptitude a l'empilement (ISO 4622:1992)
Ta slovenski standard je istoveten z: EN ISO 4622:1994
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 4622:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4622:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 4622:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 4622:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 4622:1997

---------------------- Page: 5 ----------------------

SIST EN ISO 4622:1997

---------------------- Page: 6 ----------------------

SIST EN ISO 4622:1997
ISO
INTERNATIONAL
4622
STANDARD
Second edition
1992~12-15
Paints and varnishes - Pressure test for
stackability
- Essai de Pression pour aptitude A I’empilement
Pein tures et vernis
Reference number
ISO 4622:1992(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 4622:1997
ISO 4622:1992(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 4622 was prepared by Technical Committee
ISOFC 35, Paints and varnishes, Sub-Committee SC 9, Genera/ test
methods for paints and varnishes.
This second edition cancels and replaces the first edition
(ISO 4622:1980), which has been technically revised. The only technical
Change is that provisions are now included for larger test pieces.
Annex A forms an integral part of this International Standard.
0 ISO 1992
All rights reserved. No part of this publication may be reproduced or utilized in any ferm or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 8 ----------------------

SIST EN ISO 4622:1997
INTERNATIONAL STANDARD ISO 4622: 1992(E)
Paints and varnishes - Pressure test for stackability
ISO 1514: ---J), Paints and varnishes - Standard pan-
1 Scope
els for testing.
This International Standard is one of a series of stan-
ISO 2808:1991, Paints and varnishes - Determi-
dards dealing with the sampling and testing of paints,
nation of film thickness.
varnishes and related products.
This International Standard specifies a test method for
ISO 3270:1984, Paints and varnishes and their raw
determining, under Standard conditions, whether a
ma terials - Temperatures and humidities for con-
Single-coat film or a multi-coat System of paints or
ditioning and tes ting.
related materials after a specified drying period is
sufficiently dry to resist darnage when two painted
surfaces or one painted surface and another surface
3 Required supplementary information
are placed in contact under pressure.
For any particular application, the test method speci-
The method is intended to simulate the conditions
fied in this International Standard needs to be com-
when painted articles are stacked upon each other.
pleted by supplementary information. The items of
supplementary information are given in annex A *
NOTE 1 In some countries, the test is called a “block
resistance” test.
4 Apparatus
2 Normative references
The following Standards contain provisions which,
4.1 Test apparatus, as shown in figure 1, consisting
through reference in this text, constitute provisions
of a base-plate and a free-sliding plunger. The plunger,
of this International Standard. At the time of publica-
with a head of diameter (50 + 1) mm, shall have a
tion, the editions indicated were valid. All Standards
mass not exceeding 250 g and be designed in such
are subject to revision, and Parties to agreements
a way that the face of the plunger is aligned with the
based on this International Standard are encouraged
top surface of the test Panel.
to investigate the possibility of applying the most re-
cent editions of the Standards indicated below.
NOTE 2 lt is recommended that a balljoint connection be
Members of IEC and ISO maintain registers of cur-
present between the plunger and its head.
rently valid International Standards.
ISO 1512: 1991, Paints and varnishes - Sampling of
4.2 Weight, of a mass suitable for the coating and
products in liquid or Paste form.
its intended application.
ISO 1513:1992, Paints and varnishes - Examination NOTE 3 A mass in the ra
...