Aerospace series - Receptacle, floating, single lug

This document specifies the dimensions, tolerances, required characteristics and mass of a receptacle for use in fuselage interior equipment and structural applications. This document is intended to be used in conjunction with studs according to EN 6088  or EN 6105.

Luft- und Raumfahrt - Haltenocken, schwimmend, einseitig

Dieses Dokument legt die Maße, Grenzabmaße, erforderlichen Merkmale und Masse eines Haltenocken zur Verwendung bei Inneneinrichtungen von Luftfahrzeugen und strukturellen Anwendungen fest. Dieses Dokument ist für die Anwendung in Verbindung mit Verschlussbolzen nach EN 6088  oder EN 6105 vorgesehen.

Série aérospatiale - Réceptacle, flottant, simple patte

Le présent document spécifie les dimensions, les tolérances, les caractéristiques requises et la masse d’un réceptacle flottant à simple patte pour utilisation dans les équipements à l’intérieur du fuselage et à des applications structurales. Ce document est destiné à être utilisé conjointement avec des axes conformes à l’EN 6088  ou l’EN 6105.

Aeronavtika - Gibka vtičnica z enojnim ušescem

Ta dokument določa merila za zagotavljanje in nadzor kakovosti, vrednotenje delovanja in akreditacijo biološke dozimetrije s pomočjo laboratorijev za storitve s področja citogenetike z uporabo dicentričnega testa, ki se izvaja z ročnim točkovanjem.
Ta dokument se uporablja za:
a) zaupnost osebnih podatkov prosilca in laboratorija, ki ponuja storitve;
b) zahteve za varnost laboratorija;
c) vire umerjanja in razpone odmerkov umerjanja, ki so koristni za določanje referenčnih krivulj odziva odmerka za umerjanje, ki omogočajo ocenjevanje odmerka na podlagi nestabilne frekvence kromosomskih aberacij in meje zaznavnosti;
d) postopek ocenjevanja nestabilnih kromosomskih aberacij, ki se uporabljajo za biološko dozimetrijo;
e) merila za pretvorbo izmerjene frekvence aberacije v oceno absorbiranega odmerka;
f) poročanje o rezultatih;
g) zagotavljanje in nadzor kakovosti; ter
h) informativne dodatke, ki vsebujejo vzorčna navodila za prosilca (glej dodatek A), vzorčni vprašalnik (glej dodatek B), vzorčno poročilo (glej dodatek C), primernost krivulje odziva na majhen odmerek z metodo največje verjetnosti ter izračun napake pri oceni odmerka (glej dodatek D), metodo razmerja obetov v primerih domnevne izpostavljenosti nizkemu odmerku (glej dodatek E), metodo za določanje praga odločanja in mej zaznavnosti (glej dodatek F) ter vzorec podatkovnega lista za beleženje aberacij (glej dodatek G).

General Information

Status
Published
Publication Date
29-Aug-2023
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Aug-2023
Completion Date
30-Aug-2023

Buy Standard

Standard
EN 6093:2023
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2023
Aeronavtika - Gibka vtičnica z enojnim ušescem
Aerospace series - Receptacle, floating, single lug
Luft- und Raumfahrt - Haltenocken, schwimmend, einseitig
Série aérospatiale - Réceptacle, flottant, simple patte
Ta slovenski standard je istoveten z: EN 6093:2023
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 6093
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 49.060
English Version
Aerospace series - Receptacle, floating, single lug
Série aérospatiale - Réceptacle, flottant, simple patte Luft- und Raumfahrt - Haltenocken, schwimmend,
einseitig
This European Standard was approved by CEN on 9 July 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 6093:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 3
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements . 5
4.1 Configuration, dimensions, tolerances and mass. 5
4.2 Material and surface treatment . 6
4.3 Mechanical characteristics . 8
4.4 Static values . 8
4.5 Floatability . 8
4.6 Operating temperature . 8
4.7 Mass . 8
5 Designation . 8
6 Marking . 8
7 Technical specification . 9
8 Example of installation . 9
9 Quality management system . 9
Annex A (informative) Record of revisions . 10
Bibliography . 11
European foreword
This document (EN 6093:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
1 Scope
This document specifies the dimensions, tolerances, required characteristics and mass of a receptacle
for use in fuselage interior equipment and structural applications. This document is intended to be used
in conjunction with studs according to EN 6088 or EN 6105.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
DIN 17850:1990-11, Titanium — Chemical composition
EN 2424, Aerospace series — Marking of aerospace products
EN 2491, Aerospace series — Molybdenum disulphide dry lubricants — Coat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.