EN 4611-004:2012

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between –65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard

This European Standard specifies the characteristics of UV laser printable, tin plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer (XLETFE) family for use in the on-board electrical systems of aircraft at operating temperatures between –65 ºC and 135 ºC, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2 000 Hz. These cables are suitable for airframe use without additional protection. In case of conflict between this European Standard and other referenced documents the requirements of this European Standard should take precedence.

Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen zur allgemeinen Verwendung - XLETFE-Familie - Teil 004: Kupfer verzinnt, Betriebstemperaturen zwischen –65 °C und 135 °C, doppelt extrudierte Isolierung für offene Anwendungen, UV-Laser bedruckbar - Produktnorm

Diese Europäische Norm legt die Merkmale eines mit UV-Laser bedruckbaren, verzinnten Kupferleiters für elektrische Leitungen der XLETFE-Familie zur Verwendung im elektrischen Bordnetz von Luftfahrzeugen bei Betriebstemperaturen zwischen -65 °C und 135 °C, Betriebsspannungen mit einem Effektivwert von nicht mehr als 600 V und Frequenzen von maximal 2 000 Hz fest. Diese Kabel sind zur Verwendung in der Flug¬zeugzelle ohne zusätzliche Schutzeinrichtungen geeignet. Bei Widersprüchen zwischen dieser Europäischen Norm und anderen zitierten Dokumenten gelten die Anforderungen dieser Europäischen Norm.

Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 004 : Cuivre étamé - Températures de fonctionnement comprises entre –65 °C et 135 °C - Fil double isolé pour applications externes - Marquable au laser UV - Norme de produit

Aeronavtika - Kabli, električni, za splošne namene, eno- in večžilni - Družina XLETFE - 004. del: Pocinjeni baker - Obratovalne temperature med -65 °C in 135 °C - Dvojno ekstrudirana izolacija za zunanjo uporabo - Možnost UV-laserskega tiskanja - Standard za izdelek

Ta evropski standard določa lastnosti električnih kablov, potiskljivih z UV-laserjem, z vodnikom iz pocinjenega bakra iz družine kopolimerov, pridobljenih z mrežno polimerizacijo etilena in tetrafluoretilena (XLETFE), za uporabo v električnih sistemih na krovu letal pri obratovalnih temperaturah med –65 in 135 °C, obratovalnih napetostih, ki ne presegajo efektivne vrednosti 600 V, ter frekvencah, ki ne presegajo 2000 Hz. Ti kabli so primerni za uporabo na ogrodjih letal brez dodatne zaščite. V primeru neskladja med tem standardom in drugimi navedenimi dokumenti imajo prednost določila tega standarda.

General Information

• Status: Withdrawn
• Publication Date: 07-Feb-2012
• Withdrawal Date: 13-Apr-2025
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-Nov-2018
• Completion Date: 14-Apr-2025
• Ref Project: SIST EN 4611-004:2012 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard

Relations

• Replaced By: EN 4611-004:2018 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DVHUVNHJDLuft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen für allgemeine Verwendung - XLETFE Familie - Teil 004: Kupfer verzinnt - Betriebstemperaturen zwischen - 65 °C und 135 °C - Doppelt extrudierte Isolierung für externe Verwendung - UV-Laser bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 004 : Cuivre étamé - Températures de fonctionnement comprises entre - 65 °C et 135 °C - Fil double isolé pour applications externes - Marquable au laser UV - Norme de produitAerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4611-004:2012SIST EN 4611-004:2012en,fr,de01-maj-2012SIST EN 4611-004:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4611-004
February 2012 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between -65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 004 : Cuivre étamé - Températures de fonctionnement comprisesentre -65 °C et 135 °C - Fil double isolé pour applications externes - Marquable au laser UV - Norme de produit
Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen zur allgemeinen Verwendung - XLETFE-Familie -Teil 004: Kupfer verzinnt, Betriebstemperaturen zwischen -65 °C und 135 °C, doppelt extrudierte Isolierung für offene Anwendungen, UV-Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 17 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4611-004:2012: ESIST EN 4611-004:2012
...