EN 4611-004:2018

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard

This European Standard specifies the characteristics of UV laser printable, tin plated conductor electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer (XLETFE) family for use in the on-board electrical systems of aircraft operating at temperatures between - 65 °C and 135 °C. The voltage rating is 600 V rms at sea level. This insulation system has been used in aerospace applications using 115 V (phase-to-neutral) 400 Hz and 28 Vdc. Verification of the suitability of cables for use in other electrical systems is the responsibility of the user.
These cables are suitable for airframe use although the use of additional protection against mechanical abuse may be necessary in some applications. In case of conflict between this standard and other referenced documents the requirements of this standard shall take precedence.

Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen zur allgemeinen Verwendung - XLETFE-Familie - Teil 004: Kupfer verzinnt, Betriebstemperaturen zwischen −65 °C und 135 °C, doppelt extrudierte Isolierung für offene Anwendungen, UV-Laser bedruckbar - Produktnorm

Série aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 004 : Cuivre étamé - Températures de fonctionnement comprises entre - 65 °C et 135 °C - Fil double isolé pour applications externes - Marquable au laser UV - Norme de produit

Aeronavtika - Kabli, električni, za splošne namene, eno- in večžilni - Družina XLETFE - 004. del: Pocinjeni baker - Obratovalne temperature med -65 °C in 135 °C - Dvojno ekstrudirana izolacija za zunanjo uporabo - Potiskljiva z UV-laserjem - Standard za proizvod

Ta evropski standard določa lastnosti električnih kablov, potiskljivih z UV-laserjem, z vodnikom iz pocinjenega bakra iz družine kopolimerov, pridobljenih z mrežno polimerizacijo etilena in tetrafluoroetilena (XLETFE), za uporabo v električnih sistemih na krovu letal pri obratovalnih temperaturah med –65 in 135 °C. Nazivna napetost je 600 V RMS na morski gladini. Ta izolacijski sistem se je uporabljal v aeronavtiki pri napetosti 115 V (za fazno napetost) pri 400 Hz in 28 V pri enosmerni napetosti. Za preverjanje ustreznosti kablov za uporabo v drugih električnih sistemih je odgovoren uporabnik.
Ti kabli so primerni za uporabo na ogrodjih letal, čeprav je v nekaterih primerih lahko potrebna dodatna zaščita pred mehansko obrabo. V primeru neskladja med tem standardom in drugimi navedenimi dokumenti imajo prednost določila tega standarda.

General Information

• Status: Published
• Publication Date: 27-Nov-2018
• Withdrawal Date: 30-May-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 28-Nov-2018
• Completion Date: 28-Nov-2018
• Ref Project: SIST EN 4611-004:2019 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard

Relations

• Replaces: EN 4611-004:2012 - Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between –65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Ein- und mehradrige elektrische Leitungen für allgemeine Verwendung - XLETFE Familie - Teil 004: Kupfer verzinnt - Betriebstemperaturen zwischen - 65 °C und 135 °C - Doppelt extrudierte Isolierung für externe Verwendung - UV-Laser bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, d'usage général, mono et multiconducteurs - Famille XLETFE - Partie 004 : Cuivre étamé - Températures de fonctionnement comprises entre - 65 °C et 135 °C - Fil double isolé pour applications externes - Marquable au laser UV - Norme de produitAerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135 °C - Dual extruded wall for open applications - UV laser printable - Product standard49.060Aerospace electric equipment and systems29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 4611-004:2018SIST EN 4611-004:2019en,fr,de01-februar-2019SIST EN 4611-004:2019SLOVENSKI
STANDARDSIST EN 4611-004:20121DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4611-004
November
t r s z ICS
v {ä r x r Supersedes EN
v x s sæ r r vã t r s tEnglish Version
Aerospace series æ Cablesá electricalá for general purposeá single and multicore assembly æ XLETFE Family æ Part
r r vã Tin plated copper æ Operating temperaturesá between æ
x w
¹C and
s u w
¹C æ Dual extruded wall for open applications æ UV laser printable æ Product standard Série aérospatiale æ Câblesá électriquesá d 5usage généralá mono et multiconducteurs æ Famille XLETFE æ Partie
r r v ã Cuivre étamé æ Températures de fonctionnement comprises entre æ
x w
¹C et
s u w
¹C æ Fil double isolé pour applications externes æ Marquable au laser UV æ Norme de produit
Luftæ und Raumfahrt æ Einæ und mehradrige elektrische Leitungen für allgemeine Verwendung æ XLETFE Familie æ Teil
r r vã Kupfer verzinnt æ Betriebstemperaturen zwischen æ
x w
¹C und
s u w
¹C æ Doppelt extrudierte Isolierung für externe Verwendung æ UVæLaser bedruckbar æ Produktnorm This European Standard was approved by CEN on
t r May
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v x s sæ r r vã t r s z ESIST EN 4611-004:2019

u 1 Scope . 4 2 Normative references . 4
u Terms, definitions, symbols and abbreviations . 4 4 Materials and construction .
w
w Required characteristics . 6 6 Quality assurance . 12 7 Designation .
s u 8 Identification and marking .
s u 9 Packaging, labelling and delivery lengths .
s u 10 Technical specification .
s u
u European foreword This document (EN 4611-004:2018) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2019, and conflicting national standards shall be withdrawn at the latest by May 2019. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document will supersede EN 4611-004:2012. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4611-004:2019

w v vã General EN 4611-002, Aerospace series — Cablesá electricalá for general purposeá single and multicore assembly — XLETFE Family — Part 002: General EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace Standard Products
u Terms, definiti
...