EN 4040:2006

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads

This standard specifies the characteristics of spherical plain bearings in corrosion resisting steel with self-lubricating liner, with wide inner ring, for elevated loads at ambient temperature.
They are intended for use between fixed or moving parts of the aircraft structure and their control mechanisms.
The spherical plain bearings defined in this standard are used from - 55 °C to 163 °C.

Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung mit breitem Innenring - Hohe Belastung bei Raumtemperatur - Maße und Belastungen

Diese Norm legt die Eigenschaften von Gelenklagern aus korrosionsbeständigem Stahl mit selbst¬schmierender Beschichtung und breitem Innenring für hohe Belastungen bei Raumtemperatur fest.
Sie sind zur Verwendung zwischen starren und beweglichen Flugwerkteilen und deren Steuerungs¬einrichtungen bestimmt.
Die in dieser Norm festgelegten Gelenklager werden im Temperaturbereich von  55 °C bis 163 °C eingesetzt.

Série aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifiante avec bague intérieure large - Série à charge élevée à température ambiante - Dimensions et charges

Aeronavtika - Ležaji, krogelni, drsni, iz korozijsko odpornega jekla s samomazalno oblogo, s širokim notranjim obročem - Serija za višje obremenitve pri temperaturi okolice - Mere in nosilnosti

General Information

• Status: Published
• Publication Date: 02-May-2006
• Withdrawal Date: 29-Nov-2006
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 31-May-2017
• Ref Project: SIST EN 4040:2009 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung mit breitem Innenring - Hohe Belastung bei Raumtemperatur - Maße und BelastungenSérie aérospatiale - Rotules en acier résistant à la corrosion à garniture autolubrifiante avec bague intérieure large - Série à charge élevée à température ambiante - Dimensions et chargesAerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace constructionICS:Ta slovenski standard je istoveten z:EN 4040:2006SIST EN 4040:2009en,de01-junij-2009SIST EN 4040:2009SLOVENSKI
STANDARD



SIST EN 4040:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4040May 2006ICS 49.035 English VersionAerospace series - Bearings, spherical plain in corrosionresisting steel with self-lubricating liner with wide inner ring -Elevated loads at ambient temperature - Dimensions and loadsSérie aérospatiale - Rotules en acier résistant à lacorrosion à garniture autolubrifiante avec bague intérieurelarge - Série à charge élevée à température ambiante -Dimensions et chargesLuft- und Raumfahrt - Gelenklager auskorrosionsbeständigem Stahl mit selbstschmierenderBeschichtung mit breitem Innenring - Hohe Belastung beiRaumtemperatur - Maße und BelastungenThis European Standard was approved by CEN on 16 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4040:2006: ESIST EN 4040:2009



EN 4040:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Symbols and abbreviations.5 5 Required characteristics.5 6 Designation.9 7 Marking.9 8 Technical specification.9
SIST EN 4040:2009



EN 4040:2006 (E) 3 Foreword This European Standard (EN 4040:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some
...