EN 14812:2005

Water conditioning equipment inside buildings - Chemical dosing systems -Pre-set dosing systems- Requirements for performance, safety and testing

This European Standard specifies definitions, principles of construction (but not dimensions) and design, requirements on performance and operation as well as methods for testing the performance of chemical pre-set dosing systems for conditioning water intended for human consumption inside buildings (see [7]) which are permanently connected to the mains supply

Anlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Dosiersysteme - Nicht einstellbare Dosiersysteme - Anforderungen an Ausführung, Sicherheit und Prüfung

Diese Europäische Norm legt Begriffe, Grundsätze zur Konstruktion (jedoch keine Maße) und Gestaltung, Anforderungen an die Funktion und den Betrieb sowie Verfahren zur Prüfung der Leistungsanforderungen von Dosiersystemen innerhalb von Gebäuden (siehe [7]) zur Behandlung von Wasser, das für den menschlichen Gebrauch bestimmt ist, fest, die fest am Eintrittspunkt des Wassers in die Hausinstallation angeschlossen sind.

Equipement de traitement d'eau à l'intérieur des bâtiments - Systèmes de dosage de réactifs chimiques - Systèmes de dosage non ajustables - Exigences relatives aux performances, à la sécurité et aux essais

La présente Norme européenne spécifie les définitions, les principes de conception et de construction (mais pas les dimensions), les exigences relatives aux performances et au fonctionnement ainsi que les méthodes d’essai applicables aux systèmes de dosage de réactifs chimiques utilisés pour le traitement de l’eau destinée à la consommation humaine à l’intérieur des bâtiments (voir [7]), et qui sont reliés en permanence au réseau.

Oprema, ki se uporablja za pripravo pitne vode v stavbah – Naprave za doziranje kemikalij – Prednastavljivi dozirni sistemi – Zahteve za delovanje, varnost in preskušanje

General Information

• Status: Withdrawn
• Publication Date: 18-Oct-2005
• Withdrawal Date: 12-Jun-2007
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 164 - Water supply
• Drafting Committee: CEN/TC 164 - Water supply
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Jun-2007
• Completion Date: 13-Jun-2007
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 14812:2006 - Water conditioning equipment inside buildings - Chemical dosing systems -Pre-set dosing systems- Requirements for performance, safety and testing

Relations

• Merged Into: EN 14812:2005+A1:2007 - Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Water conditioning equipment inside buildings - Chemical dosing systems -Pre-set dosing systems- Requirements for performance, safety and testingOprema, ki se uporablja za pripravo pitne vode v stavbah – Naprave za doziranje kemikalij – Prednastavljivi dozirni sistemi – Zahteve za delovanje, varnost in preskušanjeEquipement de traitement d'eau a l'intérieur des bâtiments - Systemes de dosage de réactifs chimiques - Systemes de dosage non ajustables - Exigences relatives aux performances, a la sécurité et aux essaisAnlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Dosiersysteme - Nicht einstellbare Dosiersysteme - Anforderungen an Ausführung, Sicherheit und PrüfungTa slovenski standard je istoveten z:EN 14812:2005SIST EN 14812:2006en91.140.60Sistemi za oskrbo z vodoWater supply systems13.060.20Pitna vodaDrinking waterICS:SLOVENSKI
STANDARDSIST EN 14812:200601-marec-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14812October 2005ICS 91.140.60 English VersionWater conditioning equipment inside buildings-Chemical dosingsystems-Pre-set dosing systems- Requirements forperformance, safety and testingEquipement de traitement d'eau à l'intérieur des bâtiments -Dispositifs de dosage de réactifs chimiques - Exigences deperformances, de sécurité et d'essaisAnlagen zur Behandlung von Trinkwasser innerhalb vonGebäuden - Dosiersysteme - Anforderungen anAusführung, Sicherheit und PrüfungThis European Standard was approved by CEN on 26 August 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14812:2005: E

Examples of connections.15

equipment - Radio disturbance characteristics - Limits and
methods of measurement (CISPR 11:1997, modified EN 60204-1, Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:1997) EN 60335-11, Household and similar electrical appliances – Safety – Part 1: General requirements (IEC 60335-1:2001, modified)
EN 60335-2-41, Household and similar electrical appliances - Safety - Part
2-41: Particular requirements for pumps (IEC
60335-2-41:2002) EN 60730-2-8:2002, Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2- 8:2000, modified) EN ISO 10304-1, Water quality – Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulphate ions, using liquid chromatography of ions – Part 1: Method for water with low contamination (ISO 10304-1:1992) EN ISO 10304-2, Water quality – Determination of dissolved anions by liquid chromatography of ions – Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water (ISO 10304-2:1995) EN ISO 10304-3, Water quality – Determination of dissolved anions by liquid chromatography of ions – Part 3: Determination of chromate, iodide, sulphite, thiocyanate and thiosulfate (ISO 10304-3:1997) EN ISO 10304-4, Water quality – Determination of dissolved anions by liquid chromatography of ions – Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:1997) EN ISO 11885, Water quality – Determination of 33 elements by inductively coupled plasma atomic emission spectroscopy (ISO 11885:1996) EN ISO 12100-1, Safety of machinery – Basic concepts, general principles for design – Part 1: Basic terminology, methodology (ISO 12100-1:2003)
1 Observe transition period for EN 60335-1(1994) ending 2008-07-01.
...