EN 683-3:2006

Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form

This document specifies the tolerances on dimensions and form for wrought aluminium and wrought aluminium alloy finstock supplied in accordance with EN 683-1.

Aluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) - Teil 3: Grenzabmaße und Formtoleranzen

Aluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 3 : Tolérances sur dimensions et forme

Cette Norme européenne prEN 683-3:2004 spécifie les exigences de tolérances dimensionnelles des bandes pour échangeurs thermiques livrées conformément à l'EN 683-1.
NOTE   Certains des produits énumérés dans le présent document peuvent être l'objet de brevets ou de demandes de brevets ; leur mention n'implique en aucune manière qu'une licence ait été accordée dans le cadre du droit des brevets.
La politique affirmée du CEN/TC 132 est que si celui qui déteint le brevet refuse d'accorder la licence pour des produits normalisés dans des conditions normales et non discriminatoires, les produits correspondants seront retirés du document.

Aluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike - 3. del: Odstopki mer in oblike

General Information

• Status: Published
• Publication Date: 19-Dec-2006
• Withdrawal Date: 29-Jun-2007
• ICS: 77.150.10 - Aluminium products
• Technical Committee: CEN/TC 132 - Aluminium and aluminium alloys
• Drafting Committee: CEN/TC 132/WG 6 - Aluminium foil and finstock
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 02-Dec-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
• Ref Project: SIST EN 683-3:2007 - Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form

Relations

• Replaces: EN 683-3:1996 - Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and formAluminij in aluminijeve zlitine - Hladno valjani polizdelki za toplotne izmenjevalnike - 3. del: Odstopki mer in oblikeAluminium et alliages d'aluminium - Bandes pour échangeurs thermiques - Partie 3 : Tolérances sur dimensions et formeAluminium und Aluminiumlegierungen - Vormaterial für Wärmeaustauscher (Finstock) - Teil 3: Grenzabmaße und FormtoleranzenTa slovenski standard je istoveten z:EN 683-3:2006SIST EN 683-3:2007en77.150.10Aluminijski izdelkiAluminium productsICS:SIST EN 683-3:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 683-3:200701-marec-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 683-3December 2006ICS 77.150.10Supersedes EN 683-3:1996
English VersionAluminium and aluminium alloys - Finstock - Part 3: Toleranceson dimensions and formAluminium et alliages d'aluminium - Bandes pouréchangeurs thermiques - Partie 3 : Tolérances surdimensions et formeAluminium und Aluminiumlegierungen - Vormaterial fürWärmeaustauscher (Finstock) - Teil 3: Grenzabmaße undFormtoleranzenThis European Standard was approved by CEN on 25 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 683-3:2006: E

Tables Table 1 — Tolerances on average gauge for finstock.5 Table 2 — Density.5 Table 3 — Tolerance on width for finstock.6 Table 4 — Maximum value of lateral bow.7
Figures Figure 1 — Measurement of lateral bow: method a).6 Figure 2 — Measurement of lateral bow: method b).7
...