EN 845-1:2013/FprA1:2015

Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets

This European Standard specifies requirements for wall ties, tension straps, hangers and brackets for interconnecting masonry and for connecting masonry to other parts of works and buildings including walls, floors, beams, and columns. Where anchors or fasteners are supplied or specified as part of an ancillary component, the requirements including performance requirements apply to the complete product. This European Standard is not applicable to: a) anchors and fasteners other than as part of an ancillary component; b) shelf angles; c) wall starter plates for tying into existing walls; d) products formed from materials other than: 1) austenitic stainless steel (molybdenum chrome nickel alloys or chrome nickel alloys); 2) austenitic ferritic stainless steel; 3) ferritic stainless steel; 4) copper; 5) phosphor bronze; 6) aluminium bronze; 7) zinc-coated-steel with or without organic coating; 8) polypropylene; 9) polyamide (for expansion plugs only). NOTE The resistance to fire performance of the products included herein cannot be assessed separately from the masonry element of which they are part and is therefore not covered under the scope of this part of this European Standard.

Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil 1: Maueranker, Zugbänder, Auflager und Konsolen

Spécification pour composants accessoires de maçonnerie - Partie 1: Attaches, brides de fixation, étriers de support et consoles

Specifikacija za dodatne komponente zidovja - 1. del: Vezna stremena, sidrni trakovi, obešala in konzole

General Information

• Status: Not Published
• ICS: 91.080.30 - Masonry
• Technical Committee: CEN/TC 125 - Masonry
• Drafting Committee: CEN/TC 125/WG 3 - Ancillary components
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 22-Mar-2016
• Due Date: 05-Mar-2016
• Completion Date: 22-Mar-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
• Ref Project: SIST EN 845-1:2013/kFprA1:2015 - Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets

Relations

• Merged Into: EN 845-1:2013+A1:2016 - Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
• Effective Date: 19-Jan-2023
• Amends: EN 845-1:2013 - Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
• Effective Date: 25-Sep-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 845-1:2013/kFprA1:2015
01-december-2015
Specifikacija za dodatne komponente zidovja - 1. del: Vezna stremena, sidrni
trakovi, obešala in konzole
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps,
hangers and brackets
Festlegungen für Ergänzungsbauteile für Mauerwerk - Teil 1: Maueranker, Zugbänder,
Auflager und Konsolen
Spécification pour composants accessoires de maçonnerie - Partie 1: Attaches, brides
de fixation, étriers de support et consoles
Ta slovenski standard je istoveten z: EN 845-1:2013/FprA1:2015
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
91.080.30 Zidane konstrukcije Masonry
SIST EN 845-1:2013/kFprA1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 845-1:2013/kFprA1:2015

---------------------- Page: 2 ----------------------

SIST EN 845-1:2013/kFprA1:2015


FINAL DRAFT
EUROPEAN STANDARD
EN 845-1:2013
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
October 2015
ICS 91.080.30
English Version

Specification for ancillary components for masonry - Part
1: Wall ties, tension straps, hangers and brackets
Spécification pour composants accessoires de Festlegungen für Ergänzungsbauteile für Mauerwerk -
maçonnerie - Partie 1: Attaches, brides de fixation, Teil 1: Maueranker, Zugbänder, Auflager und Konsolen
étriers de support et consoles
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 125.

This draft amendment A1, if approved, will modify the European Standard EN 845-1:2013. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 845-1:2013/FprA1:2015:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 845-1:2013/kFprA1:2015
EN 845-1:2013/FprA1:2015 (E)
Contents Page
European foreword . 3
1 Modification to Table 1 . 4
2 Modification to Clause 8. 5
3 Modification to Annex ZA . 11

2

---------------------- Page: 4 ----------------------

SIST EN 845-1:2013/kFprA1:2015
EN 845-1:2013/FprA1:2015 (E)
European foreword
This document (EN 845-1:2013/FprA1:2015) has been prepared by Technical Committee CEN/TC 125
“Masonry”, the secretariat of which is held by BSI.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
3

---------------------- Page: 5 ----------------------

SIST EN 845-1:2013/kFprA1:2015
EN 845-1:2013/FprA1:2015 (E)
1 Modification to T
...