iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1052-2:2016/AC:2017

(Corrigendum)

Methods of test for masonry - Part 2: Determination of flexural strength

Methods of test for masonry - Part 2: Determination of flexural strength

TC - clarification of Units

Prüfverfahren für Mauerwerk - Teil 2: Bestimmung der Biegezugfestigkeit

Méthodes d'essai de la maçonnerie - Partie 2: Détermination de la résistance à la flexion

Metode preskušanja za zidovje - 2. del: Ugotavljanje upogibne trdnosti

General Information

Status
Published
Publication Date
21-Mar-2017
ICS
91.080.30 - Masonry
Technical Committee
CEN/TC 125 - Masonry
Drafting Committee
CEN/TC 125/WG 4 - Test methods
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Mar-2017
Completion Date
22-Mar-2017
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
Ref Project
SIST EN 1052-2:2016/AC:2017 - Methods of test for masonry - Part 2: Determination of flexural strength

Relations

Corrects
EN 1052-2:2016 - Methods of test for masonry - Part 2: Determination of flexural strength
Effective Date
28-Dec-2016

Buy Standard

EN 1052-2:2016/AC:2017EN 1052-2:2016/AC:2017
PreviousNext
Corrigendum
EN 1052-2:2016/AC:2017
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metode preskušanja za zidovje - 2. del: Ugotavljanje upogibne trdnostiPrüfverfahren für Mauerwerk - Teil 2: Bestimmung der BiegezugfestigkeitMéthodes d'essai de la maçonnerie - Partie 2: Détermination de la résistance à la flexionMethods of test for masonry - Part 2: Determination of flexural strength91.080.30Zidane konstrukcijeMasonryICS:Ta slovenski standard je istoveten z:EN 1052-2:2016/AC:2017SIST EN 1052-2:2016/AC:2017en,fr,de01-maj-2017SIST EN 1052-2:2016/AC:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1052-2:2016/AC
March
t r s y
Mars
t r s y
März
t r s y ICS
{ sä r z rä u r English version Version Française Deutsche Fassung
Methods of test for masonry æ Part
tã Determination of flexural strength
Méthodes d 5essai de la maçonnerie æ Partie
tã Détermination de la résistance à la flexion
Prüfverfahren für Mauerwerk æ Teil
tã Bestimmung der Biegezugfestigkeit This corrigendum becomes effective on
t t March
t r s y for incorporation in the official English version of the ENä
Ce corrigendum prendra effet le
t t mars
t r s y pour incorporation dans la version anglaise officielle de la ENä
D
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1745:2020(Main)
Masonry and masonry products - Methods for determining thermal properties
SIST EN 1745:2020

This document specifies methods for the determination of thermal properties of masonry and masonry products.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 845-1:2013+A1:2016(Main)
Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
SIST EN 845-1:2013+A1:2016

This European Standard specifies requirements for wall ties, tension straps, hangers and brackets for interconnecting masonry and for connecting masonry to other parts of works and buildings including walls, floors, beams, and columns. Where anchors or fasteners are supplied or specified as part of an ancillary component, the requirements including performance requirements apply to the complete product.
This European Standard is not applicable to:
a)   anchors and fasteners other than as part of an ancillary component;
b)   shelf angles;
c)   wall starter plates for tying into existing walls;
d)   products formed from materials other than:
1)   austenitic stainless steel (molybdenum chrome nickel alloys or chrome nickel alloys);
2)   austenitic ferritic stainless steel;
3)   ferritic stainless steel;
4)   copper;
5)   phosphor bronze;
6)   aluminium bronze;
7)   zinc-coated-steel with or without organic coating;
8)   polypropylene;
9)   polyamide (for expansion plugs only).
NOTE   The resistance to fire performance of the products included herein cannot be assessed separately from the masonry element of which they are part and is therefore not covered under the scope of this part of this European Standard.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 845-2:2013+A1:2016(Main)
Specification for ancillary components for masonry - Part 2: Lintels
SIST EN 845-2:2013+A1:2016

This European Standard specifies requirements for prefabricated lintels for maximum spans of 4,5 m and made from steel, autoclaved aerated concrete, manufactured stone, concrete, fired clay units, calcium silicate units, natural stone units, or a combination of these materials. Concrete and steel beams conforming to EN 1090-1, EN 12602 and EN 13225, as appropriate, are not covered by this standard.
Prefabricated lintels can be either complete lintels or the prefabricated part of a composite lintel.
This European Standard is not applicable to:
a)   lintels completely made on site;
b)   lintels of which the tensile parts are made on site;
c)   timber lintels;
d)   natural stone lintels, not reinforced.
Linear components spanning clear openings greater than 4,5 m in masonry walls and linear components intended for use independently in a structural role (e.g. beams) are not covered by this standard.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 845-3:2013+A1:2016(Main)
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
SIST EN 845-3:2013+A1:2016

This European Standard specifies the requirements for masonry bed joint reinforcement for structural use (see 5.2.1) and for non-structural use (see 5.2.2).
Where products are intended for use in cavity wall construction, this European Standard covers only the performance of the meshwork as reinforcement in bed joints and not its performance as wall ties across the cavity.
This European Standard is not applicable to:
a)   products in the form of individual bars or rods;
b)   products formed from materials other than specified grades of austenitic stainless steel, austenitic ferritic stainless steel, zinc pre-coated steel sheet or zinc coated steel wire with or without organic coating.
NOTE   Annex ZA refers only to welded wire meshwork intended for structural use referred to in 5.2.1 as there are no known regulated requirements for products of this family for non-structural use.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1052-2:2016(Main)
Methods of test for masonry - Part 2: Determination of flexural strength
SIST EN 1052-2:2016

This European standard specifies a method for determining the flexural strength of small masonry specimens for the two principal axes of loading. Guidance is given on the preparation of the specimens, the conditioning required before testing, the testing machine, the method of test, the method of calculation and the contents of the test report.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 846-9:2016(Main)
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
SIST EN 846-9:2016

This European Standard specifies methods for determining the flexural and shear resistances and load deflection characteristics of single span, single or composite lintels used for supporting uniformly distributed loads over openings in masonry construction.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 846-14:2012(Main)
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it
SIST EN 846-14:2012

This European Standard specifies a method for determining the in plane initial shear strength of the
horizontal bed joint between the prefabricated part of a composite lintel and the masonry above it,
using a specimen tested in shear. Guidance is given on the preparation of the specimens, the conditioning required before testing, the testing machine, the method of test, the method of calculation and the contents of the test report. The method corresponds with the method described in EN 1052-3:2003+A1:2006. Guidance is given where the method deviates from EN 1052-3. Therefore, each section of EN 1052-3 is repeated given the necessary changes.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 846-7:2012(Main)
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
SIST EN 846-7:2012

This European Standard specifies the couplet method for determining the horizontal and vertical shear load resistance and load-deflection behaviour of shear ties and slip ties embedded in mortar joints. The test is intended for ties for connecting together two leaves of masonry forming a collar jointed wall or two walls at right angles. It also applies to ties used for connecting the edges of infill
panel walls to frames which encircle them.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 846-6:2012(Main)
Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
SIST EN 846-6:2012

This European Standard specifies a method for determining the tensile and compressive load capacity and load displacement characteristics of wall ties screwed, nailed, grouted or otherwise attached to frame elements or to inner leaf materials. The test is intended for ties for connecting masonry leaves to frame structures and to the inner leaves of cavity walls other than by embedding the inner connection in a mortar joint.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 846-5:2012(Main)
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test)
SIST EN 846-5:2012

This European Standard specifies the couplet method for determining the tensile and compressive load capacity and load displacement characteristics of wall ties embedded in mortar joints. The test is intended for ties used for connecting together two leaves of masonry and for the mortar-bedded end of ties for connecting masonry leaves to other structures.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day