EN 14979:2006

Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13

This European Standard specifies the measurements and tolerances of the S 13 nozzle of cylindrical flexible laminated tubes.
It is applicable to tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.

Packmittel - Laminattuben - Maße und Toleranzen des S 13 Tubenhalses

Diese Norm legt die Maße und Toleranzen des S 13 Halses zylindrischer Laminattuben fest.
Sie findet Anwendung bei Tuben zum Verpacken von Produkten der Pharmazie, der Kosmetik, der Hygiene sowie für Lebensmittel und für Industrie- und Haushaltsprodukte.

Emballage - Tubes souples laminé métal/plastique - Dimensions et tolérances de la tige de type S 13

La présente norme spécifie les dimensions et les tolérances de la tige de type S 13 des tubes souples laminés cylindriques.
Elle s'applique aux tubes utilisés pour le conditionnement de produits pharmaceutiques, cosmétiques, d'hygiène, alimentaires et autres produits industriels et domestiques.

Embalaža – Prožne plastične/kovinske laminatne tube – Mere in tolerance dulca S13

General Information

• Status: Published
• Publication Date: 14-Feb-2006
• ICS: 55.120 - Cans. Tins. Tubes
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5/WG 26 - Packages made from flexible materials (e.g. flexible plastics, plastic laminates, paper/board laminated, metal foil laminates, textiles)
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Feb-2023
• Ref Project: SIST EN 14979:2006 - Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14979:2006
01-april-2006
(PEDODåD±3URåQHSODVWLþQHNRYLQVNHODPLQDWQHWXEH±0HUHLQWROHUDQFHGXOFD
6
Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle
S 13
Packmittel - Laminattuben - Maße und Toleranzen des S 13 Tubenhalses
Emballage - Tubes souples laminé métal/plastique - Dimensions et tolérances de la tige
de type S 13
Ta slovenski standard je istoveten z: EN 14979:2006
ICS:
55.120 3ORþHYLQNH7XEH Cans. Tins. Tubes
SIST EN 14979:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14979:2006

---------------------- Page: 2 ----------------------

SIST EN 14979:2006
EUROPEAN STANDARD
EN 14979
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 55.120

English Version
Packaging - Flexible plastic/metal laminate tubes - Dimensions
and tolerances of nozzle S 13
Emballage - Tubes souples laminé métal/plastique - Packmittel - Laminattuben - Maße und Toleranzen des S
Dimensions et tolérances de la tige de type S 13 13 Tubenhalses
This European Standard was approved by CEN on 30 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14979:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14979:2006
EN 14979:2006 (E)
Contents Page
Foreword. 3
1 Scope . 4
2 Normative references. 4
3 Terms and definitions . 4
4 Dimensions of a laminate tube without rondelle. 5
5 Dimensions of a laminate tube with external rondelle . 6
6 Materials . 7
Bibliography . 8

2

---------------------- Page: 4 ----------------------

SIST EN 14979:2006
EN 14979:2006 (E)
Foreword
This European Standard (EN 14979:2006) has been prepared by Technical Committee CEN/TC 261
“Packaging”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at
the latest by August 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 14979:2006
EN 14979:2006 (E)
1 Scope
This European Standard specifies the measurements and tolerances
...