Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD

This European Standard specifies the properties of acrylonitrile-butadiene rubber (NBR)  ), fuel and synthetic oil resistant, hardness 50 IRHD, for aerospace applications.

Luft- und Raumfahrt - Acrylnitril-Butadien-Elastomer (NBR) - Beständig gegen Mineralöle - Härte 80 IRHD

Diese Norm legt die Eigenschaften von Acrylnitril-Butadien-Kautschuk (NBR) ), beständig gegen Mineralöle, Härte 80 IRHD, zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Élastomère acrylonitrile butadiène (NBR) - Résistant aux huiles minérales - Dureté 80 DIDC

La présente Norme européenne spécifie les caractéristiques de l’élastomère acrylonitrile butadiène (NBR) 1),
résistant aux huiles minérales, dureté 80 DIDC, pour les applications aérospatiales.

Aeronavtika - Akrilonitril-butadien kavčuk (NBR) - Odporen proti mineralnim oljem - Trdota 80 IRHD

Ta evropski standard določa lastnosti akrilonitril-butadien kavčuka (NBR), odpornega proti mineralnim oljem, s trdoto 80 IRHD za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
19-Feb-2013
Withdrawal Date
30-Aug-2013
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Feb-2013
Completion Date
20-Feb-2013

Buy Standard

Standard
EN 2843:2014
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Acrylnitril-Butadien-Elastomer (NBR) - Beständig gegen Mineralöle - Härte 80 IRHDSérie aérospatiale - Élastomère acrylonitrile butadiène (NBR) - Résistant aux huiles minérales - Dureté 80 DIDCAerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD49.025.40Guma in polimerni materialiRubber and plasticsICS:Ta slovenski standard je istoveten z:EN 2843:2013SIST EN 2843:2014en,fr,de01-januar-2014SIST EN 2843:2014SLOVENSKI
STANDARD



SIST EN 2843:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2843
February 2013 ICS 49.025.40 English Version
Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Mineral oil resistant - Hardness 80 IRHD
Série aérospatiale - Élastomère acrylonitrile butadiène (NBR) - Résistant aux huiles minérales - Dureté 80 DIDC
Luft- und Raumfahrt - Acrylinitrilbutadien-Elastomer (NBR) -Beständig gegen Mineralöle - Härte 80 IRHD This European Standard was approved by CEN on 3 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2843:2013: ESIST EN 2843:2014



EN 2843:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Application of the material . 4 3.1 General . 4 3.2 Typical use . 4 3.3 Temperature range . 4 4 Properties . 4 5 Designation . 6 6 Technical specification . 6
SIST EN 2843:2014



EN 2843:2013 (E) 3 Foreword This document (EN 2843:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at the latest by August 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national stan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.