Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification

This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,
rod, etc.) consisting of polyetheretherketone with 55 % continuous carbon fibres by volume (PEEK–
CF55) for aerospace applications, which is presupposed to be used in a further thermal moulding
process for forming parts described in EN 4714 1).

Luft- und Raumfahrt - Polyetheretherketon mit 55 %Volumenanteil Endlos-Kohlenstofffaser (PEEK-CF55) - Halbfabrikat - Materialspezifikation

Dieses Dokument legt die Anforderungen an ein aus Polyetheretherketon mit 55 % Volumenanteil Endlos-Kohlenstofffaser (PEEK CF55) bestehendes thermoplastisches Verbundwerkstoff Halbfabrikat (z. B. Streifen, Stab usw.) für Anwendungen in der Luft  und Raumfahrt fest, dessen Verwendung in einem weiteren thermischen Formgussverfahren zur Formung von in EN 4714  beschriebenen Teilen verwendet wird.

Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de carbone continue par volume (PEEK-CF55) - Demi-produit - Spécification de matériau

Aeronavtika - Polietereterketon s 55 % neprekinjenih ogljikovih vlaken (PEEK-CF55) - Zaloga materiala - Specifikacija materialov

Ta dokument določa zahteve za zalogo plastomernega kompozitnega materiala (npr. trakovi, palice itd.) iz polietereterketona s 55 % neprekinjenih ogljikovih vlaken (PEEK-CF55) za uporabo v aeronavtiki, ki naj bi se uporabljal v nadaljnjem postopku toplotnega oblikovanja delov, opisanih v standardu EN 4714-1).

General Information

Status
Published
Publication Date
29-Jun-2022
Withdrawal Date
29-Sep-2022
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Mar-2022
Completion Date
30-Mar-2022

Buy Standard

Standard
EN 4717:2022
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 4717:2021
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4717:2022
01-maj-2022
Aeronavtika - Polietereterketon s 55 % neprekinjenih ogljikovih vlaken (PEEK-
CF55) - Zaloga materiala - Specifikacija materialov

Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume

(PEEK-CF55) - Stock shape material - Material specification
Luft- und Raumfahrt - Polyetheretherketon mit 55 Volumen % (PEEK-CF55) endlos
Kohlenstofffaser - Halbfabrikat - Materialspezifikation

Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de carbone continue par

volume (PEEK-CF55) - Demi-produit - Spécification de matériau
Ta slovenski standard je istoveten z: EN 4717:2022
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
SIST EN 4717:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4717:2022
---------------------- Page: 2 ----------------------
SIST EN 4717:2022
EN 4717
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 49.025.40
English Version
Aerospace series - Polyetheretherketone with 55 %
continuous carbon fibre by volume (PEEK-CF55) - Stock
shape material - Material specification

Série aérospatiale - Polyétheréthercétone avec 55 % de Luft- und Raumfahrt - Polyetheretherketon mit 55

fibre de carbone continue par volume (PEEK-CF55) - Volumen % (PEEK-CF55) endlos Kohlenstofffaser -

Demi-produit - Spécification de matériau Halbfabrikat - Materialspezifikation
This European Standard was approved by CEN on 25 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4717:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4717:2022
EN 4717:2022 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

---------------------- Page: 4 ----------------------
SIST EN 4717:2022
EN 4717:2022 (E)
European foreword

This document (EN 4717:2022) has been prepared by the Aerospace and Defence Industries

Association of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this

document has received the approval of the National Associations and the Official Services of the

member countries of ASD, prior to its presentation to CEN.

This document shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by September 2022, and conflicting national standards shall

be withdrawn at the latest by September 2022.

Attention is drawn to the possibility that some of the elements of this document may be the subject

of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 4717:2022
EN 4717:2022 (E)
1 Scope

This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,

rod, etc.) consisting of polyetheretherketone with 55 % continuous carbon fibres by volume (PEEK–

CF55) for aerospace applications, which is presupposed to be used in a further thermal moulding

process for forming parts described in EN 4714 .
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the editio
...

SLOVENSKI STANDARD
oSIST prEN 4717:2021
01-junij-2021
Aeronavtika - Polietereterketon s 55 % neprekinjenih ogljikovih vlaken (PEEK-
CF55) - Zaloga materiala - Specifikacija materialov

Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume

(PEEK-CF55) - Stock shape material - Material specification
Luft- und Raumfahrt - Polyetheretherketon mit 55 Volumen % (PEEK-CF55) endlos
Kohlenstofffaser - Halbfabrikat - Materialspezifikation

Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de carbone continue par

volume (PEEK-CF55) - Demi-produit - Spécification de matériau
Ta slovenski standard je istoveten z: prEN 4717
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
oSIST prEN 4717:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4717:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4717:2021
DRAFT
EUROPEAN STANDARD
prEN 4717
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 49.025.40
English Version
Aerospace series - Polyetheretherketone with 55 %
continuous carbon fibre by volume (PEEK-CF55) - Stock
shape material - Material specification

Série aérospatiale - Polyétheréthercétone avec 55 % de Luft- und Raumfahrt - Polyetheretherketon mit 55

fibre de carbone continue par volume (PEEK-CF55) - Volumen % (PEEK-CF55) endlos Kohlenstofffaser -

Demi-produit - Spécification de matériau Halbfabrikat - Materialspezifikation

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4717:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4717:2021
prEN 4717:2021 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

---------------------- Page: 4 ----------------------
oSIST prEN 4717:2021
prEN 4717:2021 (E)
European foreword

This document (prEN 4717:2021) has been prepared by the Aerospace and Defence Industries

Association of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this document has

received the approval of the National Associations and the Official Services of the member countries of

ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the Enquiry.
This document will supersede EN 4717:2014.
---------------------- Page: 5 ----------------------
oSIST prEN 4717:2021
prEN 4717:2021 (E)
1 Scope

This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,

rod, etc.) consisting of polyetheretherketone with 55 % continuous carbon fibres by volume (PEEK –

CF55) for aerospace applications, which is presupposed to be used in a further thermal moulding

process for forming parts described in prEN 4714 .
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) app

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.