EN 28737:1992

Taper pins with external thread, unhardened (ISO 8737:1986)

Specifies the characteristics of products with metric dimensions and nominal diameters from 5 mm up to and including 50 mm; tabulates thread sizes M 5 up to M 50 with nominal lengths from 40 mm up to 400 mm and specifications with reference to International Standards; gives an example for the designation.

Kegelstifte mit Gewindezapfen, ungehärtet (ISO 8737:1986)

Goupilles de position coniques à longueur filetée, non trempées (ISO 8737:1986)

La présente Norme internationale spécifie les caractéristiques des goupilles de position coniques à longueur filetée, non trempées, de dimensions métriques et de diamètre nominal, d1, de 5 à 50 mm inclus.

Stožčasti zatiči z zunanjim navojem, nekaljeni (ISO 8737:1986)

General Information

• Status: Published
• Publication Date: 23-Jul-1992
• ICS: 21.060.50 - Pins, nails
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 04-Feb-2008
• Completion Date: 04-Feb-2008
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 28737:1996 - Taper pins with external thread, unhardened (ISO 8737:1986)

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-1996
6WRåþDVWL]DWLþL]]XQDQMLPQDYRMHPQHNDOMHQL,62
Taper pins with external thread, unhardened (ISO 8737:1986)
Kegelstifte mit Gewindezapfen, ungehärtet (ISO 8737:1986)
Goupilles de position coniques a longueur filetée, non trempées (ISO 8737:1986)
Ta slovenski standard je istoveten z: EN 28737:1992
ICS:
21.060.50 =DWLþLåHEOML Pins, nails
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 28737:19
...