EN 13480-3:2002

Metallic industrial piping - Part 3: Design and calculation

This part of EN 13480 describes the requirements for the design and calculation of industrial metallic piping systems, including supports.

Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung

Dieser Teil der Europäischen Norm EN 13480 legt die Konstruktion und Berechnung von industriellen metallischen Rohrleitungen einschließlich ihrer Halterungen fest.

Tuyauteries industrielles métalliques - Partie 3: Conception et calcul

La présente partie de EN 13480 spécifie la conception et le calcul des réseaux de tuyauteries industrielles métalliques, supports inclus.

Kovinski industrijski cevovodi - 3. del: Konstruiranje in izračun

Določa konstruiranje in izračun industrijskih kovinskih cevovodnih sistemov, vključno s podporami, ki jih zajema EN 13480.

General Information

• Status: Withdrawn
• Publication Date: 28-May-2002
• Withdrawal Date: 26-Jun-2012
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 3 - Design and calculation
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Jun-2012
• Completion Date: 27-Jun-2012
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-3:2002 - Metallic industrial piping - Part 3: Design and calculation

Relations

• Replaced By: EN 13480-3:2012 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 04-Jul-2012
• Amended By: EN 13480-3:2002/A5:2012 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-3:2002/A3:2009 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-3:2002/A4:2010 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-3:2002/A2:2006 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-3:2002/A1:2005 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 08-Jun-2022
• Parent: EN 13480-1:2002 - Metallic industrial piping - Part 1: General
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-3:2002
01-november-2002
.RYLQVNLLQGXVWULMVNLFHYRYRGLGHO.RQVWUXLUDQMHLQL]UDþXQ
Metallic industrial piping - Part 3: Design and calculation
Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung
Tuyauteries industrielles métalliques - Partie 3: Conception et calcul
Ta slovenski standard je istoveten z: EN 13480-3:2002
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-3:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-3:2002

---------------------- Page: 2 ----------------------

SIST EN 13480-3:2002
EUROPEAN STANDARD
EN 13480-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 23.040.01
English version
Metallic industrial piping - Part 3: Design and calculation
Tuyauteries industrielles métalliques - Partie 3: Conception Metallische industrielle Rohrleitungen - Teil 3: Konstruktion
et calcul und Berechnung
This European Standard was approved by CEN on 23 May 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-3:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-3:2002
EN 13480-3:2002 (E)
Issue 1 (2002-05)
Contents
Foreword.6
1 Scope .7
2 Normative references .7
3 Terms, definitions, symbols and units .8
3.1 Terms and definitions.8
3.2 Symbols and units .8
4 Basic design criteria.10
4.1 General.10
4.2 Loadings .10
4.2.1 General.10
4.2.2 Combination of loads .11
4.2.3 Loads for dimensioning .11
4.2.4 Other loads to be taken into account .12
4.2.5 Design conditions.13
4.3 Thickness.16
4.4 Tolerances .
...