EN 4352:2004

Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 °C

This standard specifies the characteristics of double hexagon headed bolts with lockwire holes, relieved shank and long thread, in NI-PH2601, MoS2 coated, for aerospace applications.
Classification: 1 550 MPa  ) / 425 °C  )

Luft- und Raumfahrt - Zwölfkantschrauben mit Löchern für Sicherungsdraht, Dünnschaft, langes Gewinde, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718), MoS2-beschichtet - Klasse: 1 550 MPa (bei Raumtemperatur)/425 °C

Diese Norm legt die Eigenschaften von Zwölfkantschrauben mit Löchern für Sicherungsdraht, Dünnschaft und langem Gewinde, aus NI PH2601, MoS2-beschichtet, für Anwendungen in der Luft- und Raumfahrt fest.
Klasse: 1 550 MPa )/425 °C ).

Série aérospatiale - Vis à tête bihexagonale avec trous de fil frein, fût dégagé, filetage long, en alliage résistant à chaud à base de nickel NI-PH2601 (Inconel 718), revêtues MoS2 - Classification : 1 550 MPa (à température ambiante) / 425 °C

Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 °C

General Information

• Status: Published
• Publication Date: 09-Nov-2004
• Withdrawal Date: 30-May-2005
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4352:2005 - Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 °C

Relations

• Replaces: EN 4352:2003 - Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH 2601 (Inconel 718), MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425°C
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4352:2005
01-junij-2005
1DGRPHãþD
SIST EN 4352:2004
Aerospace series - Bolts, double hexagon head with lockwire holes, relieved
shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718),
MoS2 coated - Classification: 1 550 MPa (at ambient temperature) / 425 °C
Aerospace series - Bolts, double hexagon head with lockwire holes, relieved shank, long
thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated -
Classification: 1 550 MPa (at ambient temperature) / 425 °C
Luft- und Raumfahrt - Zwölfkantschrauben mit Löchern für Sicherungsdraht, Dünnschaft,
langes Gewinde, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718),
MoS2-beschichtet - Klasse: 1 550 MPa (bei Raumtemperatur)/425 °C
Série aérospatiale - Vis a tete bihexagonale avec trous de fil frein, fut dégagé, filetage
long, en alliage résistant a chaud a base de nickel NI-PH2601 (Inconel 718), revetues
MoS2 - Classification : 1 550 MPa (a température ambiante) / 425 °C
Ta slovenski standard je istoveten z: EN 4352:2004
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 4352:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4352:2005

---------------------- Page: 2 ----------------------

SIST EN 4352:2005



EUROPEAN STANDARD
EN 4352

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2004
ICS 49.030.20 Supersedes EN 4352:2003
English version
Aerospace series - Bolts, double hexagon head with lockwire
holes, relieved shank, long thread, in heat resisting nickel base
alloy NI-PH2601 (Inconel 718), MoS2 coated - Classification: 1
550 MPa (at ambient temperature) / 425° C
Série aérospatiale - Vis à tête bihexagonale avec trous de Luft- und Raumfahrt - Zwölfkantschrauben mit Löcher für
fil frein, fût dégagé, filetage long, en alliage résistant à Sicherungsdraft, Dünnschaft, langes Gewinde, aus
chaud à base de nickel NI-PH2601 (Inconel 718), revêtues hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel
MoS2 - Classification : 1 550 MPa (à température 718), MoS2 beschichtet - Klasse: 1 550 MPa (bei
ambiante) / 425° C Raumtemperatur) / 425° C
This European Standard was approved by CEN on 11 September 2003.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4352:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4352:2005

EN 4352:2004 (E)
Contents                                                                         Page

Foreword.3
1 Scope .4
2 Normative references .4
3 Required characteristics.4
4 Designation .9
5 Marking .9
6 Technical specification .
...