EN 3745-516:2012

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test

This standard specifies a method of checking the break resistance and attenuation variation recovery of an
optical cable subjected to severe bending under load.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 516: Schwere Kabelbiegeprüfung

Diese Europäische Norm legt ein Verfahren zur Prüfung der Bruchfestigkeit und Wiederherstellung des Ausgangszustandes der Dämpfungsänderung bei optischen Leitungen im Rahmen einer schweren Kabelbiegeprüfung fest.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 516: Essai de courbure sévère

La présente Norme Européenne spécifie une méthode pour vérifier la résistance à la cassure et la récupération de la variation d’atténuation d’un câble optique soumis à une courbure sévère sous charge.

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 516. del: Upogibni preskus kabla

Ta evropski standard določa metodo za preverjanje odpornosti na prelom in obnovitev sprememb v slabljenju optičnega kabla, ki je bil izpostavljen upogibanju pod obremenitvijo.

General Information

• Status: Withdrawn
• Publication Date: 17-Jul-2012
• Withdrawal Date: 21-Mar-2017
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Mar-2017
• Ref Project: SIST EN 3745-516:2012 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test

Relations

• Replaced By: EN 3745-516:2017 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test
• Effective Date: 12-Mar-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3745-516:2012
01-oktober-2012
$HURQDYWLND2SWLþQDYODNQDLQNDEOL]DXSRUDERY]UDþQLKSORYLOLK3UHVNXVQH
PHWRGHGHO8SRJLEQLSUHVNXVNDEOD
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516:
Severe cable bend test
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil
516: Kabelbiegeprüfung
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais
- Partie 516 : Essai de courbure sévère
Ta slovenski standard je istoveten z: EN 3745-516:2012
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3745-516:2012 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3745-516:2012

---------------------- Page: 2 ----------------------

SIST EN 3745-516:2012


EUROPEAN STANDARD
EN 3745-516

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2012
ICS 49.090
English Version
Aerospace series - Fibres and cables, optical, aircraft use - Test
methods - Part 516: Severe cable bend test
Série aérospatiale - Fibres et câbles optiques à usage Luft- und Raumfahrt - Faseroptische Leitungen für
aéronautique - Méthodes d'essais - Partie 516: Essai de Luftfahrzeuge - Prüfverfahren - Teil 516: Schwere
courbure sévère Kabelbiegeprüfung
This European Standard was approved by CEN on 23 March 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3745-516:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3745-516:2012
EN 3745-516:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Preparation of specimens .4
4 Apparatus .4
5 Method .6

2

---------------------- Page: 4 ----------------------

SIST EN 3745-516:2012
EN 3745-516:2012 (E)
Foreword
This document (EN 3745-516:2012) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According
...