EN 4641-301:2011

Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard

This product standard specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 50/125 µm Graded Index fibre core, 1,8 mm outside diameter for non pull-proof contact designs.

Luft- und Raumfahrt - Lichtwellenleiterkabel, Mantelaußendurchmesser 125 µm - Teil 301: Fester Aufbau, 50/125 µm GI-Faser, Kabelaußendurchmesser 1,8 mm - Produktnorm

Diese Produktnorm legt die allgemeinen Merkmale, Qualifizierungsbedingungen, Abnahme und Qualitätssicherung
für ein Lichtwellenleiterkabel mit einer 50/125 µm Gradientenindexfaser und 1,8 mm Außendurchmesser
für nicht zugsichere Kontakte fest.

Série Aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 μm - Partie 301 : Câble à structure serrée, fibre à gradient d’indice 50/125 μm, diamètre extérieur 1,8 mm - Norme de produit

La présente norme spécifie les caractéristiques générales, les conditions de qualification, d'acceptation et d'assurance qualité des câbles à fibre optique avec une fibre à gradient d'indice 50/125 µm, diamètre extérieur 1,8 mm pour une conception de contact non étiré.

Aeronavtika - Optični kabli, premer vlakna z oklepom 125 µm - 301. del: Kompaktna struktura 50/125 µm GI, imenski zunanji premer kabla 1,8 mm - Standard za izdelek

Ta standard določa splošne značilnosti, pogoje za odobritev kvalifikacije in za zagotavljanje kakovosti za optični kabel s stopnjevalnim lomnim količnikom 50/125 µm, z imenskim zunanjim premerom kabla 1,8 m za načrte za kontakte, ki niso odporni proti vlečenju.

General Information

• Status: Withdrawn
• Publication Date: 03-May-2011
• Withdrawal Date: 22-Mar-2022
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Mar-2022
• Ref Project: SIST EN 4641-301:2011 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard

Relations

• Replaced By: EN 4641-301:2022 - Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4641-301:2011
01-november-2011
$HURQDYWLND2SWLþQLNDEOLSUHPHUYODNQD]RNOHSRP—PGHO
.RPSDNWQDVWUXNWXUD—P*,LPHQVNL]XQDQMLSUHPHUNDEODPP
6WDQGDUG]DL]GHOHN
$HURVSDFHVHULHV&DEOHVRSWLFDOȝPGLDPHWHUFODGGLQJ3DUW7LJKWVWUXFWXUH
—P*,ILEUHQRPLQDOPPRXWVLGHGLDPHWHU3URGXFWVWDQGDUG
/XIWXQG5DXPIDKUW/LFKWZHOOHQOHLWHUNDEHO&ODGGLQJGXUFKPHVVHUȝP7HLO
)HVWDGHUDXIEDX*,ȝP)DVHU.DEHODX‰HQGXUFKPHVVHUPP3URGXNWQRUP
6pULH$pURVSDWLDOH&kEOHVRSWLTXHVGLDPqWUHH[WpULHXUGHODJDLQHRSWLTXHȝP
3DUWLH&kEOHjVWUXFWXUHVHUUpHILEUHjJUDGLHQWG¶LQGLFHȝPGLDPqWUH
H[WpULHXUPP1RUPHGHSURGXLW
Ta slovenski standard je istoveten z: EN 4641-301:2011
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 4641-301:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4641-301:2011

---------------------- Page: 2 ----------------------

SIST EN 4641-301:2011


EUROPEAN STANDARD
EN 4641-301

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2011
ICS 49.060
English Version
Aerospace series - Cables, optical 125 µm diameter cladding -
Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm
outside diameter - Product standard
Série Aérospatiale - Câbles, optiques, diamètre extérieur Luft- und Raumfahrt - Lichtwellenleiterkabel,
de la gaine optique 125 µm - Partie 301: Câble à structure Claddingdurchmesser 125 µm - Teil 301: Festaderaufbau
serrée, fibre à gradient d'indice 50/125 µm, diamètre GI 50/125 µm, Faser Kabelaußendurchmesser 1,8 mm -
extérieur 1,8 mm - Norme de produit Produktnorm
This European Standard was approved by CEN on 12 February 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4641-301:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4641-301:2011
EN 4641-301:2011 (E)
Contents Page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions, symbols and abbreviations . 4
4 Required characteristics . 4
5 Cable construction . 5
6 Materials . 6
7 Test methods and performances . 6
8 Tooling . 12
9 Quality assurance . 12
10 Designation and marking .
...