EN 3545-002:2008

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements

This standard specifies conditions which are common to rectangular electrical connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from -55 °C to 175 °C.
It shall be used together with EN 3545-001.

Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 002: Leistungsdaten und Kontaktanordnungen

Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C - Partie 002 : Spécification de performances et d'arrangement des contacts

Aeronavtika - Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje, plastično ohišje, zaporni mehanizem, delovna temperatura med –55 °C in 175 °C - 002. del: Specifikacija lastnosti in razporeditev kontaktov

General Information

• Status: Published
• Publication Date: 03-Jun-2008
• Withdrawal Date: 30-Dec-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 04-Jun-2008
• Completion Date: 04-Jun-2008
• Ref Project: SIST EN 3545-002:2008 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements

Relations

• Replaces: EN 3545-002:2005 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2008
$HURQDYWLND.RQHNWRUMLHOHNWULþQLSUDYRNRWQLVWHVQLOQRNDSRDOLEUH]QMH
SODVWLþQRRKLãMH]DSRUQLPHKDQL]HPGHORYQDWHPSHUDWXUDPHG±ƒ&LQƒ&
GHO6SHFLILNDFLMDODVWQRVWLLQUD]SRUHGLWHYNRQWDNWRY
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002:
Specification of performance and contact arrangements
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere
Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
175 °C - Teil 002: Leistungsdaten und Kontaktanordnungen
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à
l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C
- Partie 002: Spécification de performances et d'arrangement des contacts
Ta slovenski standard je istoveten z: EN 3545-002:2008
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3545-002
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 49.060 Supersedes EN 3545-002:2005
English Version
Aerospace series - Connectors, electrical, rectangular, with
sealed and non-sealed rear, plastic housing, locking device,
operating temperatures - 55 °C to 175 °C - Part 002:
Specification of performance and contact arrangements
Série aérospatiale - Connecteurs électriques, Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder
rectangulaires, étanches et non étanches à l'arrière, à mit und ohne hintere Abdichtung, Plastikgehäuse,
boîtier en plastique, à verrouillage, températures Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
d'utilisation - 55 °C à 175 °C - Partie 002 : Spécification de 175 °C - Teil 002: Leistungsdaten und Kontaktanordnungen
performances et d'arrangement des contacts
This European Standard was approved by CEN on 14 March 2008.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3545-002:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Operating conditions.6
5 List of product standards .9
6 Polarization – Coding .9
7 Contact arrangements.10
8 Contacts.14
9 Filler plugs.14
10 Rear accessory .14
11 Tooling.14
12 Assembly and wiring instructions .14

Foreword
This document (EN 3545-002:2008) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2008, and conflicting national standards shall be withdrawn
at the latest by December 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3545-002:2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

1 Scope
This standard specifies conditions which are common to rectangular electrical connectors with sealed and
non-sealed rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C.
It shall be used together with EN 3545-001.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2591-100, Aerospace series ― Elements of electrical and optical connection ― Test methods ― Part 100:
General.
EN 2591-209, Aerospace series ― Elements of electrical and optical connection ― Test methods ― Part 209:
Current temperature derating.
EN 3155-002, Aerospace series ― Electrical contacts used in elements of connection ― Part 002: List and
utilization of contacts.
EN 3155-003, Aerospace series ― Electrical contacts used in elements of connection ― Part 003: Contacts,
electrical, female, type A, crimp, class S ― Product standard.
EN 3155-008, Aerospace series ― Electrical contacts used in elements of connection ― Part 008: Contacts,
electrical, male, type A, crimp, class S ― Product standard.
EN 3155-070, Aerospace series ― Electrical contacts used in elements of connection ― Part 070: Contacts,
electrical, male, type A, crimp, class S ― Product standard.
EN 3155-071, Aerospace series ― Electrical contacts used in elements of connection ― Part 071: Contacts,
electrical, female, type A, crimp, class S ― Product standard.
1)
EN 3197, Aerospace series ― Installation of aircraft electrical and optical interconnection systems.
EN 3545-001, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 001: Technical specification.
EN 3545-003, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 003: Connectors with
female contacts ― Product standard.
EN 3545-004, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 004: Connectors with male
contacts ― Product standard.
EN 3545-005, Aerospace series ― Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures – 55 °C to 175 °C ― Part 005: Female coding and
attachment system for mounting on free housing (plug) ― Product
...