EN 1932:2001

External blinds and shutters - Resistance to wind loads - Method of testing

The current standard defines the test methods to be applied to evaluate the wind resistance of blinds and shutters designed to be used in front windows, windows/doors or fa\ades and delivered as a complete unit. This standard applies to: - Shutters: roller shutter, external venetians blind, wing shutter, venetian shutter, concertina shutter and sliding panel shutters. (Including those with projection systems).

Abschlüsse und Markisen - Widerstand gegen Windlast - Prüfverfahren

Die vorliegende Norm definiert die anzuwendenden Prüfverfahren um die Windwiderdsfähigkeit, von Abschlüssen, Schutzvorrichtungen und Markisen, die vor Fenstern, Türen oder Fassaden betrieben werden sollen und die als komplette Anlagen geliefert werden, festzustellen. Die vorliegende Norm gilt für: - Abschlüsse: Rolladen, außenjalousien bzw. Raffstore, Drehladen, geführte und ungeführte Falt- und Schiebeladen. Sie gilt ebenfalls für die Abschlüsse mit einem Ausstellsystem (Rolladen, geführte und ungeführte Faltladen).

Fermetures pour baies équipées de fenêtres et stores extérieurs - Résistance aux charges de vent - Méthodes d'essai

La présente norme définit les méthodes d'essai à appliquer pour évaluer les performances de résistance au vent des fermetures et des stores destinés à être mis en oeuvre devant des fenêtres, portes-fenêtres ou des façades et livrés sous la forme d'ensembles complets. La présente norme s'applique: - aux fermetures: volet roulant, vénitien extérieur, volet battant, persienne, persienne coulissante, jalousie et volet coulissant. Les fermetures dotées d'un système de projection sont également visées (volet roulant, persienne, persienne coulissante, jalousie).

Zunanja senčila in polkna - Odpornost proti obremenitvam z vetrom - Preskusna metoda

General Information

• Status: Withdrawn
• Publication Date: 20-Mar-2001
• Withdrawal Date: 18-Jun-2013
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 3 - Blinds and shutters
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Jun-2013
• Completion Date: 19-Jun-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Ref Project: SIST EN 1932:2001 - External blinds and shutters - Resistance to wind loads - Method of testing

Relations

• Replaced By: EN 1932:2013 - External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria
• Effective Date: 06-May-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHWRGDAbschlüsse und Markisen - Widerstand gegen Windlast - PrüfverfahrenFermetures pour baies équipées de fenetres et stores extérieurs - Résistance aux charges de vent - Méthodes d'essaiExternal blinds and shutters - Resistance to wind loads - Method of testing91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 1932:2001SIST EN 1932:2001en01-september-2001SIST EN 1932:2001SLOVENSKI
STANDARD



SIST EN 1932:2001



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1932March 2001ICS 91.060.50English versionExternal blinds and shutters - Resistance to wind loads - Methodof testingFermetures pour baies équipées de fenêtres et storesextérieurs - Résistance aux charges de vent - Méthodesd'essaiAbschlüsse und Markisen - Widerstand gegen Windlast -PrüfverfahrenThis European Standard was approved by CEN on 1 March 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1932:2001 ESIST EN 1932:2001



Page 2EN 1932:2001CONTENTSPageForeword.31Scope.32Normative references.33Terms and definitions.43.1test pressure p.43.2nominal test load FN.43.3safety load FS.43.4dimensions.44Test conditions.54.1Dimensions of test samples.54.2Laboratory conditions.55Folding arm and treillis arm awnings.55.1Test preparation.55.2Test methods.66Pivot arm awning and marquisolette.86.1Test preparation.86.2Test methods.97Awning with lateral guiderail without tension system.117.1Test preparation.117.2Test methods.128Awning with lateral guiderail with tension system.138.1Test preparation.148.2Test methods.
...