EN 3660-013:2008

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard

This product standard defines a range of cable outlets, style A, for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :    65 °C to 200 °C
   Class W   :    65 °C to 175 °C

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 013: Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit Arm für Kabelbinder - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 013 : Raccord, type A, droit non étanche, avec tenue du câble par fretage - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 013. del: Kabelska spojka, tip A, ravna, netesnjena, z držalom za spojko - Standard za proizvod

General Information

• Status: Published
• Publication Date: 15-Apr-2008
• Withdrawal Date: 30-Oct-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3660-013:2008 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3660-013:2008
01-julij-2008
$HURQDYWLND'RGDWNL]DRNURJOHLQSUDYRNRWQHHOHNWULþQHLQRSWLþQHNRQHNWRUMH
GHO.DEHOVNDVSRMNDWLS$UDYQDQHWHVQMHQD]GUåDORP]DVSRMNR6WDQGDUG
]DSURL]YRG
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie
strain relief - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 013: Endgehäuse, Bauform A, gerade, nicht abgedichtet,
mit Arm für Kabelbinder - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 013 : Raccord, type A, droit non étanche, avec tenue du
câble par fretage - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-013:2008
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3660-013:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 3660-013
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 49.060

English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 013: Cable
outlet, style A, straight, unsealed, with cable tie strain relief -
Product standard
Série aérospatiale - Accessoires arrière pour connecteurs Luft- und Raumfahrt - Endgehäuse für elektrische und
circulaires et rectangulaires électriques et optiques - Partie optische Rund- und Rechtecksteckverbinder - Teil 013:
013 : Raccord, type A, droit non étanche, avec tenue du Endgehäuse, Bauform A, gerade, nicht abgedichtet, mit
câble par fretage - Norme de produit Arm für Kabelbinder - Produktnorm
This European Standard was approved by CEN on 19 January 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-013:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 3660-013:2008 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Characteristics.4
5 Designation .10
6 Marking .11
7 Technical specification .11

2

---------------------- Page: 3 ----------------------

EN 3660-013:2008 (E)
Foreword
This document (EN 3660-013:2008) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the
...